PDC502-CXDXXX P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
- Low power consumption
- RoHS Compliant
- Gray Face, White Segments or Black Face, White Segments
- Easy mounting on PCB or socket Mechanical Dimensions Notes: 1. Dimensions in millimeters [inch], and tolerance is ±0.25 [.010] and angle is ±1° unless otherwise noted. 2. Bending ≤ Length*1% 4. Specifications subject to change without notice
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 2 of 9 Device Selection Guide Model Number Chip Description Note Material Emitting Color Common Cathode x=C Common Anode x=A Add “BFWS” to end of part number for Black Face, White Segment version PDC502-CxDG05 InGaN True Green PDC502-CxDG17 AlInGaP Yellow Green PDC502-CxDY04 Yellow PDC502-CxDA11 Amber PDC502-CxDR02 Orange-Red PDC502-CxDR11 Red PDC502-CxDR21 Deep Red Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit G17/Y04/A11/R02/R11/R21 G05 Power Dissipation per Dice P AD 70 114 mW Derating Liner from 25°C per Dice -- 0.33 0.4 mA/°C Continuous Forward Current Per Dice I AF 2 5 3 0 m A Peak Current Per Dice (duty cycle 1/10, 1KHz) IPF 90 100 mA Reverse Voltage Per Dice VR 5 5 V Electrostatic Discharge (HBM) ESD / 1000 V Operating Temperature Topr -35~+85 °C Storage Temperature Tstg -35~+85 °C Solder Conditions: 1/16 inch below seating plane for 3 -5 seconds at 260°C.
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 3 of 9 Electrical and Optical Characteristics at Ta=25°C Parameter Symbol Chip Min. Typ. Max. Unit Condition Forward Voltage Per Segment VF G05 -- 3.2 3.8 V IF=20mA G17/Y04/A11 Luminous Intensity Per Segment Iv G05 -- 200 -- mcd IF=10mA G17 -- 9 -- Y04 -- 40 -- A11 -- 55 -- R02 -- 25 -- R11 -- 20 R21 -- 15 -- Peak Emission Wavelength / Dominant Wavelength λP/λd G05 -- */525 -- nm IF=20mA G17 -- 572/570 -- Y04 -- 592/590 -- A11 -- 612/605 -- R02 -- 632/625 -- R11 -- 644/630 -- R21 -- 660/645 -- Reverse Current I R -- -- 100 μA VR=5V Luminous Intensity Matching Ratio Iv-m -- -- 2:1 -- IF=10mA
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 4 of 9 Typical Electrical/Optical Characteristic Curves
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 5 of 9 Luminous General lv Bin Grade (IF = 10mA) Color Rank Limits (IF=20mA)
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 6 of 9 All Light-On Segments Feature & Pad Position Internal Circuit Diagram Common Anode Common Cathode
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 7 of 9 Precautions for Use 1. Recommended soldering conditions 1.1. Wave soldering Basic SPEC is ≤ 5sec. When 260°C. If temperature is higher, time should be shorter (+10°C→ -1sec.). 1.2. Soldering Iron: Power dissipation of iron should be smaller than 15W and temp should be controllable. Soldering temperature should be under 260°C, time ≤ 3sec.
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 8 of 9 Packing Dimensions Note: 1. Specifications subject to change without notice.
www.p-tec.net 0 4 0 8 1 5 R e v 1 J A S P a g e 9 of 9 Record Of Revisions Rev. Comments Page Date
0 Released Spec -- 11/12/13
1 Logo Update All 04/08/15
Approved By Checked By Prepared By