DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
Low power consumption RoHS Compliant Gray Face, White Segments or Black Face, White Segments Easy mounting on PCB or socket Mechanical Dimensions Notes: 1. Dimension in millimeter [inch], tolerance is ±0.25 [.010] and angle is ±1° unless otherwise noted 2. Bending ≤ Length*1% 3. All pins are 0.5*0.3 4. Specifications subject to change without notice
www.p-tec.net 110713 Rev0 MS Page 2 of 9 Device Selection Guide Model Number Chip Description Note Material Emitting Color Common Anode or Common Cathode Add “BW” to end of part number for Black Face, White Segment version PDC31-CxDG05 InGaN Pure Green PDC31-CxDG17 AlInGaP Yellow Green PDC31-CxDY04 Yellow PDC31-CxDA11 Amber PDC31-CxDR02 Orange-Red PDC31-CxDR11 Red PDC31-CxDR21 Deep Red Absolute Maximum Ratings at Ta=25Ԩ Parameter Symbol Rating Unit G17/Y04/A11/R02/R11/R21 G05 Power Dissipation per Dice P AD 70 114 mW Derating Liner from 25Ԩ per Dice -- 0.33 0.4 mA/Ԩ Continuous Forward Current Per Dice I AF 25 30 mA Peak Current Per Dice (duty cycle 1/10, 1KHz) IPF 90 100 mA Reverse Voltage Per Dice VR 5 5 V Electrostatic Discharge (HBM) ESD / 1000 V Operating Temperature Topr -35~+85 Ԩ Storage Temperature Tstg -35~+85 Ԩ Solder Conditions: 1/16 inch below seating plane for 3 -5 seconds at 260Ԩ.
www.p-tec.net 110713 Rev0 MS Page 3 of 9 Electrical and Optical Characteristics at Ta=25Ԩ Parameter Symbol Chip Min. Typ. Max. Unit Condition Forward Voltage Per Segment VF G05 -- 3.2 3.8 V IF=20mA G17/Y04/A11/ R02/R11/R21 -- 2 2.8 Luminous Intensity Per Segment Iv G05 -- 120 -- mcd IF=10mA G17 -- 6 -- Y04 -- 30 -- A11 -- 45 -- R02 -- 20 -- R11 -- 12 -- R21 -- 10 -- Peak Emission Wavelength / Dominant Wavelength λP/λd G05 -- */525 -- nm IF=20mA G17 -- 572/570 -- Y04 -- 592/590 -- A11 -- 612/605 -- R02 -- 632/625 -- R11 -- 644/630 -- R21 -- 660/645 -- Reverse Current I R -- -- 100 μA VR=5V Luminous Intensity Matching Ratio Iv-m -- -- 2:1 -- IF=10mA
www.p-tec.net 110713 Rev0 MS Page 4 of 9 Luminous General lv Bin Grade (IF = 10mA) Color Rank Limits (IF=20mA)
www.p-tec.net 110713 Rev0 MS Page 5 of 9 All Light-On Segments Feature & Pad Position Internal Circuit Diagram Common Anode Common Cathode
www.p-tec.net 110713 Rev0 MS Page 6 of 9 Typical Electrical / Optical Characteristic Curves (Ta = 25Ԩ Unless Otherwise Noted)
www.p-tec.net 110713 Rev0 MS Page 7 of 9 Precautions for Use 1. Recommended soldering conditions a. Wave soldering i. Basic SPEC is ≦5sec. When 260Ԩ. If temperature is higher, time should be shorter (+10Ԩ→ -1sec.). 2. Soldering Iron: a. Power dissipation of iron should be smaller than 15W and temp should be controllable. Soldering temperature should be under 260Ԩ, time ≦3sec.
www.p-tec.net 110713 Rev0 MS Page 8 of 9 Packing Dimensions
www.p-tec.net 110713 Rev0 MS Page 9 of 9 Record Of Revisions Rev. Comments Page Date
0 Released Spec -- 11/07/13
Approved By Checked By Prepared By