PDAM120 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PDAM120 series of compact, open-framed AC-DC switching power supplies offers a high power density to fit in a small space. This dense 3” x 2” platform offers up to 120W of continuous power across a wide range of operating temperatures, all while maintaining a low emissions profile. All models meet EN55011 class B emission limits, and comply with UL, IEC, CE, and more. Features:

  • Very High Power Density : 15.27 W/in 3
  • Class I or Class II configuration
  • UL/EN60601-1 Medical Approval #
  • Small 2” x 3” package
  • Efficiencies up to 91%
  • Suitable for BF Applied Part Applications
  • Meets Efficiency Level VI Requirements
  • No load power consumption <300mW Model Number 1 Output Voltage Maximum Load with Convection Cooling 2 Maximum Load with 10CFM Forced Air Output load regulation Ripple & Noise (Vp-p) 3 Max Capacitive Load (µF) Typical Efficiency AT 230 VAC PDAM120-12A 12V 8.333A 10.000A ±1% 160mV 3000 90% PDAM120-14A 24V 4.167A 5.000A ±1% 240mV 1500 90% PDAM120-18A 48V 2.083A 2.500A ±1% 480mV 500 91% PDAM120-12B 12V 7.500A 10.000A ±1% 160mV 3000 90% PDAM120-14B 24V 3.750A 5.000A ±1% 240mV 1500 90% PDAM120-18B 48V 1.875A 2.500A ±1% 480mV 500 91% PDAM120-12C 12V 7.083A 10.000A ±1% 160mV 3000 90% PDAM120-14C 24V 3.541A 5.000A ±1% 240mV 1500 90% PDAM120-18C 48V 1.770A 2.500A ±1% 480mV 500 91% NOTES: 1. Model number ending with “A” indicates open frame format. Model number ending with “B” indicates U-channel format. Model number ending with “C” indicates enclosed format 2. Derate convection only output power by 10% for U-Channel models. Derate convection only output power by 15% for Enclosed models. 3. Measured at 20MHz bandwidth with a 47uF electrolytic and 0.1uF ceramic capacitor in parallel with the DC output rails.

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Safety Standards & EMC Specifications Safety Standards Approved to USA/Canada UL60601-1—1.3.1 Edition UL62368-1 (Pending) Safety Standards Approved to Europe IEC/EN 60601-1 3rd Edition, CB Report EN62368-1 (Pending) EMI Standard EN55011 Class B conducted, class A radiated EMC Performance EN61000-3-2: Harmonic distortion, class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ±15 KV air and ±8 KV contact EN61000-4-3: Radiated immunity, 10 V/m EN61000-4-4: Fast transient/burst, ±2 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com EN61000-4-6: Conducted immunity, 10 Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms *Consult with TT Electronics for information on additional country safety approvals Isolation Input to Output 4000VAC / 5656VDC4 (2 x MOPP) Input to Ground 2000VAC / 2828VDC4 (1 x MOPP) Output to Ground 1500VAC / 2121VDC4 (1 x MOPP) Touch Current <100µA max. @ 264VAC Input Specifications Input Voltage Range 90 to 264 VAC5 Input Frequency Range 47 to 63Hz Input Current 2A max @ 115VAC; 1A max @ 230VAC Inrush Current 45A max @ 115VAC; 90A max @ 230 VAC No Load Power Consumption <300mW Power Factor >0.9 @ 240VDC and 120VDC NOTES: 4. Derate convection only output power by 10% for U-Channel models. Derate convection only output power by 15% for Enclosed models. 5. Derate output power by 0.8%/V below 115VAC

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 3 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Continued Output Specifications Total Output Power 120W with 10CFM Forced Air 100W Convection Only2 Output Voltage See models and ratings table. Hold Up Time 10mS minimum Efficiency Up to 91%. See models and ratings table. Line Regulation ±1% Voltage Adjustability ±4% Setpoint accuracy ±2% Minimum Load No Minimum Load Protection Features Over Voltage Protection Latch off Overtemperature Latch off Over Current Protection Hiccup Mode. OCP Threshold typically 150%. Short Circuit Hiccup Mode Environmental Specifications Operating Temperature -30ºC to +70ºC6 Storage Temperature -30ºC to +85ºC Operating Humidity 20% - 90% RH Operating Altitude <5000m MTBF >250K hours per MIL-HDBK-217F at full load and 25ºC ambient Physical Specifications Dimensions 3.04”L x 2”W x 1.31”H Typical 7 Weight 6.4oz Typical. NOTES: 6. See derating curves for operation above 50°C 7. Dimensions given are those of PCB. I/O conductors extend slightly beyond PCB edge.

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 4 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams Derating Curves Note: Input voltage derating and thermal derating are superimposed. The PDAM120 cannot operate with input voltages below 99VAC in thermal environments below –10°C

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 5 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Diagrams Simplified Block Diagram

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 6 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Pin # Function

1 AC Input (N)

2 No Pin

3 AC Input (L)

4 DC+ Output

5 DC+ Output

6 DC Return

7 DC Return

8 Protective Earth9

Notes (continued from second page): 9. All four mounting holes must secured to a conductive metal surface to establish protective earth continuity. 10. All dimensions in mechanical drawings are given in mm unless otherwise specified Mechanical Drawing & Pin-out (Open Frame Models)

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 7 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Pin # Function

8 Protective Earth

Notes (continued from fourth page): 11. Do not screw more than 2.5mm deep into threads of base plate for U-Channel or Enclosed models. 12. Headers on all models as seen below. Use mates or equivalent. Mechanical Drawing & Pin-out (U-Channel Models) JSTALEX

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.1 22/07/2020 Page: 8 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Mechanical Drawing & Pin-out (Enclosed Models) Pin # Function Notes (continued from fourth page): 11. Do not screw more than 2.5mm deep into threads of base plate for U-Channel or Enclosed models. 12. Headers on all models as seen below. Use mates or equivalent. JSTALEX