PD739C13 MITSUBISHI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

PD739C13 is a f20mm InGaAs pin photodiodes with Trans-Impedance Amplifier (TIA). This PD with TIA features a high-speed response and low noise, and is suitable for 2.5Gb/s optical communication systems. APPLICATION Receiver for optical communication system ABSOLUTE MAXIMUM RATINGS Note 1) Symbol Parameter Conditions Ratings Unit Vpd PD supply voltage - 20 V Vcc TIA supply voltage - 6 V Pin Photo input power - 2.0 mW Ipd PD reverse current - 2.0 mA Tstg Storage temperature - -40 ~ +85 C Note 1: The maximum rating and limitation over which the device should not be operated instant time. And this does not mean the guarantee of its lifetime. As for the reliability, please refer to the reliability report from Mitsubishi Semiconductor Quality Assurance section. RECOMMENDED OPERATING CONDITIONS Limits Symbol Parameter Test conditions Min. Typ. Max. Unit Vcc TIA supply voltage - 3.0 3.3 5.5 V Tc Case temperature - -20 - +85 C ELECTRICAL / OPTICAL CHARACTERISTICS (Tc=25 C, Vcc=3.3V, Vpd=3.3V ,l=1300nm) Limits Symbol Parameter Test conditions Min Typ Max Unit R Responsivity RL=50W, Single-ended 0.75 1.2 - kV/W Icc TIA consumption current Pin=0mW - 35 70 mA fc Cut-off frequency RL=50W, -3dB, Pin=10mW 1.5 2.0 - GHz in Averaged equivalent input noise current density Pin=0mW, f=10MHz -1.4GHz, RL=50W - 9.0 - pA/ Hz1/2 Pr Minimum received sensitivity NRZ, PBS=2 23-1, BER=10 -10, MITSUBISHI ELECTRIC ( 1 / 2 ) As of July ‘02 Build-in TIA Single 3.3V supply voltage for TIA Differential output Ball lens cap

(2/2) MITSUBISHI PHOTO DIODES PD739C13 PD739C13 30 φ5.6 (2) (1) (4) (3) 90+2 0.4 0.4 5-0.45 2.54 P.C.D. (5) 4.0 4.6 0.5 (1) (2) (4) (3) (1) Vpd (2) Vcc (5) GND(Case) PD (4) (3) OUT OUTLead Connection 1) Vpd 2) Vcc 3) Out 4) Out 5) GND(Case) Unit:mm InGaAs PIN PHOTO DIODES MITSUBISHI ELECTRIC 0.18 The center of active diameter is 180um away from the center of stem.