PD35A SJM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- 3000 to 5000 MHz
- Insertion loss 0.51dB @ 3200MHz
- Isolation 33dB @ 3500MHz
- Lead-free / Green / compliant SOT-26 Package
Applications
- Base station / Repeater / Mobile / Automotive / Military – 5G, FDD-LTE, TD-LTE, WCDMA RF IN GND 2,4,6 OUT 1 OUT 2
Description
ThePD35A is a highperformanceDividerin a highqualitySOT-26 package& surface-mountedpackage. The device featureslow insertionlossandhighisolation. Thedevicehasa goodinput/output matchingandexceptionalamplitude/phasebalance. Theproductis targetedforusingas wirelessinfrastructureapplications. Alldevices are100% RFandDCtested. Absolute Maximum Ratings Parameter Rating Unit RF Power Input 30 dBm Storage Temperature -55 to 150 °C Ambient Operating Temperature -40 to 85 °C 1) Stresses above the maximum values listed have may cause permanent damage to the device. 1) Test Conditions : T=25°C, 50ohm System, Insertion Loss is less 3dB split.
http://www.prewell.com 2 Power Divider SJM PREWELL PD35A Productsand product information are subject to change without notice.Version 16 3000 3500 4000 4500 5000 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 25℃ S21 (dB) Frequency (MHz) Insertion Loss 3000 3500 4000 4500 5000 -35 -30 -25 -20 -15 -10 25℃ S11 (dB) Frequency (MHz) Input Return Loss 3000 3500 4000 4500 5000 -35 -30 -25 -20 -15 -10 25℃ Isolation (dB) Frequency (MHz) Isoloation Parameters Units Frequency (MHz) 3000 3200 3500 3800 4200 5000 Typical RF Performance 3000 3500 4000 4500 5000 -35 -30 -25 -20 -15 -10 25℃ S22 (dB) Frequency (MHz) Output Return Loss Input Return Loss Output Return Loss Insertion Loss Isolation
http://www.prewell.com 3 Power Divider SJM PREWELL PD35A Productsand product information are subject to change without notice.Version 16 Lead-free /RoHS Compliant / Green SOT-26 Package Outline Evaluation Board Layout (14.4 x 30.5) XXXX SYMBO L MILLIMETERS NOTE SYMBL O TOLERANCE OF FORM AND POSITION NOT EMINIMUM NOMIANLMAXIMUM A1 0.000 0.050 0.100 aaa 0.15 A2 1.000 1.100 1.200 bbb 0.20 b - 0.100 0.450 ccc 0.10 c 0.110 0.150 0.190 ddd 0.10 D 2.800 2.900 3.000 3.4 E 2.600 2.800 3.000 E1 1.500 1.600 1.700 3.4 e 0.930 0.950 0.970 L 0.400 - - θ1 5˚ REF. θ2 5˚ REF. Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 0.8mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. Product Code Optional (Year Code) Optional(ICC)