PD30CNB20NAM5SA CARLOGAVAZZI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Specifications are subject to change without notice (13.06.2016) 1 Product Description The PD30CNB20 sensor family comes in a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. The sensors are useful in applications where high-ac - curacy detection as well as small size is required. Compact housing and high power LED for excellent performance-size ratio. The potentiometer function for adjustment of the sen - sitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is NO and NC out - put.

  • Miniature sensor range
  • Range: 200 mm
  • Sensitivity adjustment by potentiometer
  • Modulated, red light 625 nm
  • Supply voltage: 10 to 30 VDC
  • Output: 100 mA, NPN or PNP preset
  • Make and break switching function
  • LED indication for output, stability and power ON
  • Protection: reverse polarity, short circuit and transients
  • Cable and plug versions
  • Excellent EMC performance
  • Exelent colour matching Photoelectrics Diffuse-reflective, Background Suppression Type PD30CNB20....SA Type Selection Housing Range Connection Ordering no. Ordering no. W x H x D Sn NPN PNP Make and break switching Make and break switching 10 x 30 x 20 mm 200 mm Cable PD 30 CNB 20 NASA PD 30 CNB 20 PASA 10 x 30 x 20 mm 200 mm Plug PD 30 CNB 20 NAM5SA PD 30 CNB 20 PAM5SA Specifications EN 60947-5-2 Rated operating distance (Sn) Up to 200 mm, reference target, Kodak test card R27, white, 90% reflective, 100 x 100 mm Maximum detecting distance @ 200 mm white background White object 90% refl. ≤ 200 mm Grey object 18% refl. ≤ 200 mm Black object 6% refl. ≤ 200 mm Blind zone 10 mm Sensitivity Electrical adjustmment 210˚ Mechanical adjustment 240˚ Temperature drift ≤ 0.05%/ºC Hysteresis (H) ≤ 10% Rated operational volt. (UB ) 10 to 30 VDC (ripple included) Ripple (Urpp ) ≤ 10% Output current Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA (max. load capacity 100 nF) No load supply current (Io) ≤ 20 mA @ UB max ≤ 40 mA @ UB min Minimum operational current (Im) ≤ 0.5 mA OFF-state current (Ir ) ≤ 100 µA Voltage drop (Ud ) ≤ 2 VDC @ Ie max Protection Short-circuit, reverse polarity and transients Light source InGaAlP, LED, 625 nm Light type Red, modulated Emitter angle ± 2.5º @ half sensing distance Ambient light ≤ 10,000 lux Operating frequency (f) ≤ 500 Hz Response time OFF-ON (tON) ≤ 1 ms ON-OFF (tOFF ) ≤ 1 ms Power ON delay (tv) ≤ 200 ms Output function Open collector NPN or PNP by sensor type Output switching function N.O. and N.C. Ordering Key Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Sensitivity adjustment PD30CNB20NAM5SA

2 Specifications are subject to change without notice (13.06.2016) PD30CNB20....SA Specifications (cont.) Indication Output ON LED, yellow Power ON LED, green Environment Installation category III (IEC 60664/60664A; 60947-1) Pollution degree 3 (IEC 60664/60664A; 60947-1) Degree of protection IP 67 (IEC 60529; 60947-1) Ambient temperature Operating -25° to +60°C (-13° to +140°F) Storage -40° to +70°C (-40° to +158°F) Vibration 10 to 150 Hz, 1.0 mm/15 G (IEC 60068-2-6) Shock 30 g / 11ms, 3 pos, 3 neg per axis Rated insulation voltage ≤ 500 VAC (rms) Housing material Body ABS Light Grey Frontglas PMMA Red Trimmer shaft POM Dark Grey Connection Cable PVC, black, 2 m 4 x 0.14 mm2, Ø = 3.3 mm Plug M8, 4-pin (CON. 54-series) Weight Cable version ≤ 50 g Plug version ≤ 20 g CE-marking Yes Approvals cULus (UL508 + CSA) Operation Diagram Power supply Object OFF ON Not Present Present Break Output (N.C.) Make Output (N.O.) OFF ON OFF ON Tv Tv Tv = Power ON delay Sensing Conditions White background 90% [inches] 0,0% 2,0% 4,0% 6,0% 8,0% 10,0% 12,0% 14,0% 16,0% Distance from background [%] 0 25 50 75 100 125 150 175 200 225 250 White background 90% [mm] Poly. (Black on White 6%/90%) Poly. (Grey on White 18%/90%) Poly. (White on White 90%/90%) Detection Diagram 4(mm) 50 100 150 200 250 Sensing range (mm) -0,16 -0,12 -0,08 -0,04 0,04 0,08 0,12 0,16 (Inches) Sensing range (inches) 0,00

Specifications are subject to change without notice (13.06.2016) 3 Delivery Contents

  • Photoelectric switch: PD30CNB20 ...
  • Screwdriver
  • Packaging: Plastic bag PD30CNB20....SA Dimensions 25.4 1.1 5.55.5 Emitter Receiver Optical axis Two, 9.5 dia. Lenses Two M3 17 10.8 10.6 10.622 Power / Stability LED Green Output LED Yellow 25.4 1.1 5.55.5 Emitter Receiver Optical axis Two, 9.5 dia. Lenses Two M3 17 10.8 10.6 10.622 Power / Stability LED Green Output LED Yellow 10.25 Potentiometer Potentiometer Plug versionCable version PD30CNP 06NPM5T R LU xxxxxxS 10-30 V 100 mA BN: V+ BU: V- BK: OUT WH: ET PD30CNP 06NPM5T R LU xxxxxxS 10-30 V 100 mA BN: V+ BU: V- BK: OUT WH: ET > 100 mm Incorrect Correct > 100 mm Incorrect Correct To avoid interference from inductive voltage / current peaks, separate the proximity switch cables from any other power cables. E.g. Engine, contactor or solenoid cables Correct Incorrect Incorrect Correct The cable should not be pulled A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier Installation Hints Wiring Diagrams NPN 1BN 3BU 2WH 4BK PNP 1BN 3BU 2WH 4BK Accessories
  • Mounting bracket APD30-MB1 or APD30-MB2 to be purchased separately.