PD140FNT60QMU-02C CARLOGAVAZZI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Through Beam

Description

The PD140 sensor consists of an emitter, which sends out invisible, infrared light, and a receiver, capable of detecting the light from the emitter. The sensor is encapsulated in a robust, vandal- proof aluminium/polycarbonate housing. The lenses are adjustable in both ±100° horizontal and ± 15° vertical directions, which allows flexible mounting, even when emitter and receiver are mounted at different heights. The aspherical lens design gives a superior homogeneous light beam over the total beam angle. - Sensor test function: the emitter has a built-in test input designed to mute the emitter and thus evaluate the sensor function. The test function is to be controlled and monitored by the door controller. Main features

  • Designed for Industrial doors and gates
  • ESPE type 2, Performance level d
  • For door or gate widths up to 60 m
  • Modulated, infrared light
  • Supply voltage: 12 to 24 VAC/DC
  • 1 A, SPDT relay output
  • Analogue voltage output or flashing LED indication for optical alignment help
  • Built-in holder for green laser alignment accessory tool
  • Yellow LED for output indication
  • Green LED indication for power ON
  • Connection: self-lifting terminal block, 1,5 mm2 (AWG 16)
  • Emitter test input
  • Robust vandal-proof aluminium/polycarbonate housing
  • CE, EN12453, EN12978, UL325 and UL508 approved Main functions
  • Designed for domestic and industrial doors and gates
  • Detects presence or absence of persons or vehicles by interruption of the light beam from the emitter to receiver

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 References Product selection key PD140FNT60 -02C Enter the code option instead of Code Option Description - P - Photoelectric sensor D - Rectangular housing 140 - Length of housing F - Aluminium N - Not used T - Through-beam 60 - Distance [m] QMU Matched sensor set (Receiver and Emitter) Q SPDT relay (Receiver) Sensor is only available as a matched set MU Mute input (Emitter) Sensor is only available as a matched set -02C - Black Type selection Function - Code Receiver and Emitter Sensor set PD140FNT60QMU-02C Receiver Not available PD140FNT60Q-02C Emitter Not available PD140FNT60MU-02C

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Structure C A A B F G H D C A A B E D F G H I Fig. 1 Emitter Fig. 2 Receiver Fig. 3 Rear view Element Component Element Component A Fixing holes for sensor mounting F Cable gland for cable entry B Terminal block G Hole for laser adjustment tool C Jumpers H Lens adjustment D Green LED I Alternative cable entry E Yellow LED

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Sensing Detection Rated operating dis- tance (Sn) ≤ 60 m @ target, PD140 emitter and excess gain 4 Sensitivity adjustment (Receiver) 12 m ... 60 m Jumper pos 1 6 m ... 12 m Jumper pos 2 0.6 m ... 6 m Jumper pos 3 Blind zone 0.6 m Hysteresis 10 ... 20% Light source 850 nm Infrared Light type Infrared modulated Detection angle ≤ ± 5° Emitter beam angle ≤ ± 5° Light spot size 3.7 m @30 m (half sensing distance) Lens adjustment ± 100° Horizontal ± 15° Vertical Accuracy Temperature drift ≤ 0.3%/ºC Repeatability < 5%

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Detection diagram D 03 36 69 81 31 1641 97 2302 62 2953 28 3613 94 4274 59 492 01 02 03 04 05 06 07 08 09 01 00 1101 20 1301 40 150 -19,7 -16,4 -13,1 -9,8 -6,6 -3,3 0,0 3,3 6,6 9,8 13,1 16,4 19,7 A C B E F G Y X H I A Detection width [m] F OFF B Sensing range [m] G ON C Detection width [feet] H Emitter D Sensing range [feet] I Receiver E Limits

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Excess gain 100 1.000 10.000 11 01 00 3,3 32,8 328 0,6 2,0 C B A D E A Excess gain D ESPE 2, legal detection angle 5) B Sensing range [m] E ESPE 2, illegal detection angle 5) C Sensing range [feet] 5) See detection diagram

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020

Features

(Ue-min - Ue-max) 12 ... 24 V AC/DC (ripple included) Rated operational voltage (UB) 10.2 ... 35 V DC Ripple (Urpp ) Within limits of UB min No load supply current (Io) DC ≤ 55 mA @ UB max Emitter ≤ 50 mA @ UB max Receiver No load supply current (Io) AC ≤ 100 mA @ UB max Emitter ≤ 100 mA @ UB max Receiver Power-ON delay (tv) ≤ 200 ms Emitter ≤ 200 ms Receiver Outputs Output functions SPDT relay Output switching function N.O. and N.C. Output current < 1 A / 30 VDC Continuous(Ie) < 0.5 A / 50 VAC Continuous(Ie) Minimum operational current (Im) ≥ 1 mA @ 5 V Mechanical lifetime ≥ 5 000 000 cycles Electrical lifetime (typical) > 100 000 cycles @ Resistive load AC-1 and DC-1 Protection reverse polarity and transients Emitter and Receiver Utilization category AC-1 Non-inductive or slightly inductive loads, resistive load EN 60947-4-1DC-1 AC-14 Control of small electromagnetic loads EN 60947-5-1 DC-13 Control of electromagnets EN 60947-5-1 (with freewheeling diode)

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Operation diagram Emitter supply ON Receiver Supply ON Object Break beam F G Mute/Test input Active A BCCDC F G Make output (N.O.) ON E E EE CC D A Receiver startup time (150 ms) E OFF Hold Time (80 ms) B Emitter startup time (150 ms) F Beam obstruction / mute active > 80 ms C Break response time (8 ms) G Beam obstruction / mute active < 80 ms D Make response time (8 ms) Response times Operating frequency (f) 10 impulses / sec. Response times tON (ON-OFF) < 8 ms tOFF (OFF-ON) < 8 ms OFF Hold time > 80 ms Indication Receiver Green LED Yellow LED Power Output ON OFF ON OFF ON ON ON ON ON Flash1) ON; EG ≥ 4 OFF / Alignment mode OFF Flash1) EG < 4 OFF / Alignment mode 1) Slow flashing or OFF = Not aligned, Higher flash rate= Better optical alignment EG = Excess gain Emitter Green LED - Power Emitting ON - ON Yes OFF - ON No (muted)

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Environmental Ambient light ≥ 100 000 lux Incandescent light @ 3000 … 3200 °K (EN 60947-5-2) ≥ 10 000 lux 4) Incandescent light 3200 °K (EN 61496-2) ≥ 3 000 lux 4) Fluorescent light (EN 61496-2) 0.05 J @ 200 Hz to 0.5 J @ 5 Hz 4) Stroboscopic light (EN 61496-2) 3 to 5 J @ 0.5 to 2 Hz 4) Flashing beacon light (EN 61496-2) Vibration 10 ...150 Hz, 1.0 mm/15 g EN 60068-2-6 Shock 30 gn / 11ms, 6 pos, 6 neg per axis EN60068-2-27 Drop test 2 x 1 m and 100 x 0.5 m EN 60068-2-31 Rated insulation voltage (Ui) 50 VDC Dielectric insulation voltage ≥ 4000 VAC rms 50/60 Hz for 1 min. Rated impulse withstand voltage ≥ 2 kV 1.2/50 µs Pollution degree 3 EN60947-1 Overvoltage category III IEC60664; EN60947-1 Degree of protection IP65 IEC60539; EN60947-1 NEMA Enclosure Types Indoor + outdoor: 3, 3R, 3RX, 3SX, 3X NEMA 250 Indoor: 1, 2, 5, 12, 12K NEMA 250 Ambient humidity range RH < 50% @ 70°C 2) RH < 90% @ 20°C 2) 2) With no icing or condensation 4) Failure to danger (worst case alignment) EMC Electrostatic discharge immunity test ± 8 kV @ air discharge IEC 61000-4-2 ± 15 kV @ contact discharge (Closed sensor with aluminium housing) ± 8 kV @ contact discharge (during installation) Radiated radio-frequency electromag- netic field immunity test (80 MHz ... 1 GHz and 1.4 GHz ... 2 GHz)

10 V/m IEC 61000-4-3

Electrical fast transient/Burst immu- nity test 4 kV / 5 kHz using the capacitive coupling clamp IEC 61000-4-4 Conducted disturbances induced by radio-frequency fields immunity test (150 kHz ... 80 MHz)

10 V rms IEC 61000-4-6

Power frequency magnetic field im- munity test 300 A/m IEC 61000-4-8

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Mechanics/electronics Connection Cable diameter Ø 5 ... 10 mm Connection 3-pole screw terminal Emitter 5-pole screw terminal Receiver Terminal Self-lifting terminal block, 1.5 mm2 (AWG 16) 2.6 x 2 mm Wiring +~- N.O. C N.C. V V A C MU V V B A Fig. 4 Receiver Fig. 5 Emitter A B C Power supply Mute input (Test input) Relay contacts Housing Cover Aluminium, Black Window PC, Black Back part PBT, Black Sealing Neoprene Cable gland PA6, Light grey Dimensions 140 x 51 x 46 mm Weight ≤ 460 g (matched set)

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Dimensions (mm) 122.4 36.6 150 140 15.3 36.2 31.32

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Compatibility and conformity Approvals and markings General reference Sensor designed according to EN60947-5-2 MTTFd related to product life time 49.9 years @ 40°C (+104°F) EN ISO 13849-1 (Parts count method, annex D.1), SN 29500 MTTFd related to safety device, perfor- mance leveld 1332 years @ 40°C (+104°F) EN ISO 13849-1, SN 29500 CE-marking Approvals (UL325) (UL508 + C22.2) ESPE category 2 EN61496-2 Performance level (PL) d EN12453 PFHd 8.57 x 10-8 Errors per hour EN ISO 13849-1 Mission Time 20 years EN ISO 13849-1

Carlo Gavazzi Industri A/S PD140FNT60QMU-02C PD140FNT60QMU-02C ENG 15/07/2020 Delivery contents and accessories Delivery contents

  • Photoelectric sensor set: PD140FNT60Q-02C + PD140FNT60MU-02C
  • Accessory bag (Screws, plugs, blind caps, cable glands)
  • Packaging: Card board box Accessories
  • Laser alignment tool: APD140-LA01
  • Laser alignment tool without batteries (Battery: DL1/3N, CR1/3N 3V - Lithium): APD140-LA02
  • Alignment test cable: APD140-TC01 Further information Information Where to find it QR Manual http://cga.pub/?6ddc71 COPYRIGHT ©2020 Content subject to change. Download the PDF: www.gavazziautomation.com