PD26A SJM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • 1800 to 3000 MHz
  • Insertion loss 0.79dB @ 2300MHz
  • Isolation -22dB @ 2300MHz
  • Lead-free / Green / compliant SOT-26 Package

Applications

  • Base station / Repeater / Mobile / Automotive / Military FDD-LTE, TD-LTE, TDS-CDMA, CDMA, WCDMA, WiMAX, PCS, GSM, GPS, GPRS, TETRA
  • IoT/ Broadcasting / WLAN FM, DMB, DVB, ISM RF IN GND 2,4,6 OUT 1 OUT 2

Description

The PD26A is a highperformanceDividerin a highqualitySOT-26 package & surface-mounted package. The device featureslow insertionlossandhighisolation. Thedevicehasa goodinput/output matchingandexceptionalamplitude/phasebalance. Theproductis targetedforusingas wirelessinfrastructureapplications. Alldevices are100% RFandDCtested. Absolute Maximum Ratings Parameter Rating Unit RF Power Input 30 dBm Storage Temperature -55 to 150 °C Ambient Operating Temperature -40 to 85 °C 1) Stresses above the maximum values listed have may cause permanent damage to the device. 1) Test Conditions : T=25°C, 50ohm System, Insertion Loss is less 3dB split.

http://www.prewell.com 2 Power Divider SJM PREWELL PD26A Productsand product information are subject to change without notice.Version 0.6 1800 2000 2200 2400 2600 2800 3000 25℃ S21 (dB) Frequency (MHz) Insertion Loss 1800 2000 2200 2400 2600 2800 3000 -30 -24 -18 -12 25℃ S11 (dB) Frequency (MHz) Input Return Loss 1800 2000 2200 2400 2600 2800 3000 -30 -25 -20 -15 -10 25℃ Isolation (dB) Frequency (MHz) Isoloation Parameters Units Frequency (MHz) 1800 2300 2600 3000 Insertion Loss dB 0.79 0.79 0.84 1.07 Isolation dB -14.0 -22.1 -22.1 -16.0 Input Return Loss dB -18 -22 -18 -12 Output Return Loss dB -14 -17 -22 -24 Amplitude Balance dB 0.01 0.02 0.01 0.02 Phase Balance deg 0.33 0.26 0.43 0.75 Typical RF Performance 1800 2000 2200 2400 2600 2800 3000 -50 -40 -30 -20 -10 25℃ S22 (dB) Frequency (MHz) Output Return Loss Input Return Loss Output Return Loss Insertion Loss Isolation

http://www.prewell.com 3 Power Divider SJM PREWELL PD26A Productsand product information are subject to change without notice.Version 0.6 Lead-free /RoHS Compliant / Green SOT-26 Package Outline Evaluation Board Layout (27 x 22) SYMBOL MILLIMETERS NOTESYMBLO TOLERANCE OF FORM AND POSITION NOTE MINIMUM NOMIANL MAXIMUM A1 0.000 0.050 0.100 aaa 0.15 A2 1.000 1.100 1.200 bbb 0.20 b - 0.100 0.450 ccc 0.10 c 0.110 0.150 0.190 ddd 0.10 D 2.800 2.900 3.000 3.4 E 2.600 2.800 3.000 E1 1.500 1.600 1.700 3.4 e 0.930 0.950 0.970 L 0.400 - - θ1 5˚ REF. θ2 5˚ REF. Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 0.8mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. Product Code Optional (Year Code) Optional(ICC)