PD121SL1

PD121SL1 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 21

Technical content

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 Version :0.3 TECHNICAL SPECIFICATION MODEL NO : PD121SL1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation Confirmed By Prepa red By Preliminary FOR MORE INFORMATION: AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA, 92656

Http://www.AZDISPLAYS.com

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 TECHNICAL SPECIFICATION

CONTENTS

NO. ITEM PAGE - Cover 1 - Contents 1

1 Application 3

2 Features 3

3 Mechanical Specifications 3

4 Mechanical Drawing of TFT-LCD Module 4

5 Input / Output Terminals 6

6 Absolute Maximum Ratings 7

7 Electrical Characteristics 7

8 Pixel Arrangement 10

9 Display Color and Gray Scale Reference 11

10 Block Diagram 12

11 Interface Timing 13

12 Power On Sequence 14

13 Optical Characteristics 15

14 Handling Cautions 18

15 Reliability Test 19

16 Packing Diagram 20

• Revision History 21

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 1.Application The PD121SL1 model is a 12.1” TFT-LCD module with a 2-CCFL Backlight Unit and a 20-pin 1ch-LVDS interface. This module supports 800 x 600 SVGA mode and displays 262,144 colors. The inverter module for the Backlight Unit is not built in. This module can apply TFT-LCD monitor, TV, Factory application, Amusement Vehicle,… and so on. 2. Features - Wide viewing angle - High contrast ratio - Fast response time - High color saturation - SVGA ( 800 x600 pixels) resolution - Wide operating temperature - DE (Data Enable) mode - LVDS (Low Voltage Differential Signaling) interface - RoHS Compliance - Reversible-Scan Funtion 3.Mechanical Specifications Parameter Specifications Unit Screen Size 12.1 (diagonal) inch Display Format 800 ×(R, G, B) ×600 dot Display Colors 262,144 Active Area 246.00(H) ×184.50(V) mm Pixel Pitch 0.3075(H) ×0.3075(V) mm Pixel Configuration Stripe Outline Dimension 260.5(W)×204.0(H) ×12.17(typ.) (D) mm Weight 660 ±20 g Back-light CCFL, 2 tube Surface treatment Anti-glare & Hard Coating Display mode Normally Black

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 Mechanical Drawing of TFT-LCD Module ETHAN 12.17±0.5 4.500 8.42±0.5 11.80 4.50 33.40 204.00±0.5 70.00 140.00 4-M2 USER HOLE MIN DEPTH:2.7mm MAX TORQUE:2.0kg-cm BHR-03VS-1 (103.40) 249.00(BEZEL OPENING) 246.00±0.002(ACTIVE AREA) (131.00) 260.5±0.5 11.15 9.65 5.00 6.50 DISPLAY AREA CENTER 187.50(BEZEL OPENING) 184.50±0.002(ACTIVE AREA) BHR-03VS-1 2.LAMP CONNECTOR:BHR-03VS-1(JST) 1.GENERAL TOLERANCE: NOTE: ±0.3mm 3.Reference drawing 53.40 45.30 50.00 100.00

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 ETHAN 67.40±10 67.40±10 (60.9) 42.5±1 65.05±1(65.95) 1 20 1.GENERAL TOLERANCE: ±0.3mm NOTE: 3.Reference drawing 2.LAMP CONNECTOR:BHR-03VS-1(JST) JAE FI-SEB20P-HFE or Starconn 076B20-0048RA-G4 JST BHR-03VS-1 PIN3:LV(WHITE) PIN1:HV(PINK) PIN1:HV(PINK) PIN3:LV(WHITE) JST BHR-03VS-1

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type: JAE-FI-SEB20P-HFE or STARCONN 076B20-0048RA-G4 Pin No. Symbol Function Remark 1 Vcc_IN Power Supply(5.0V/ 3.3V) 2 Vcc_IN Power Supply(5.0V/ 3.3V)

3 GND Ground

4 GND Ground

5 RXO- Differential Data Input, CH0 (Negative )

6 RXO+ Differential Data Input, CH0 ( Positive ) R0~R5,G0

7 GND Ground

8 RX1- Differential Data Input, CH1 ( Negative )

9 RX1+ Differential Data Input , CH1 ( Positive ) G1~G5,B0,B1

10 GND Ground

11 RX2- Differential Data Input , CH2 ( Negative )

12 RX2+ Differential Data Input , CH2 (Positive ) B2~B5,DE

13 GND Ground

14 CLK- Differential Clock Input ( Negative )

15 CLK+ Differential Clock Input (Positive)

16 GND Ground

17 L/R Horizontal Display Mode Select Signal Note 5-1

18 U/D Vertical Display Mode Select Signal Note 5-1

19 GND Ground

20 GND Ground

The definitions U/D & R/L L/R=High , U/D=Low L/R=Low , U/D=Low L/R=High , U/D=High L/R=Low, U/D= High

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 5-2) Backlight driving Connector Part No.: JST BHR-03VS-1 or equivalent Pin No Symbol Description Remark

1 HV Input terminal (Hi voltage side) Wire color : Pink

2 NA NA

3 LV Input terminal (Low voltage side) Wire Color : White ,Note 5-2

Note 5-2 : Low voltage side of backlight inverter connects with ground of inverter circuits. 6.Absolute Maximum Ratings: The followings are maximum values, which if exceeded, may cause faulty operation or damage to the unit.     GND=0V,Ta=25 ℃ Parameters Symbol MIN. MAX. Unit Remark Supply V oltage V CC -0.3 +6.0 V Logic input V oltage Vin -0.3 +2.7 V Note 6-1 Note 6-1: Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Ta=25 ± 2 ºC Value Parameter Symbol Min. Typ. Max. Unit Note Power Supply Voltage Vcc 3.0 3.3 / 5.0 5.5 V - Ripple Voltage V RP - - 100 mV - Rush Current I RUSH - - Note 6-1 A Note 7-2 White - 800 - mA Note 7-3 Power Supply Current Black - - 440 - mA Note 7-3 LVDS differential voltage Vid -100 - +100 mV LVDS common input voltage Vic - 1.2 - V Note 7-1 The module is recommended to operate within specification ranges listed above for normal function.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 Note 7-2 Measurement Conditions: Vcc rising time is 470 µs Note 7-3 :The specified power supply current is under the conditions at Vcc = 5.0 V , T a = 25 ± 2 ºC, fv = 60 Hz, where as a power dissipation check pattern below is displayed. a. White Pattern b . Black Pattern

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 7-2) Recommended Driver Condition for Backlight Ta=25 ℃ Item Symbol Min. Typ. Max. Unit Remark Lamp Current I L 2.0 8.0 8.5 mA Note 7-4 Lamp V oltage V L 450 500 550 Vrms I L=8mA Lamp frequency F 45 - 80 KHz Note 7-5 Power Consumption PL - 4.0 - W Note 7-6 Starting voltage(25 ℃) (Reference Value) VS - - 1010 Vrms Note 7-7 Starting voltage(0℃) (Reference Value) VS - - 1200 Vrms Note 7-7 Note 7-4 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-5: The lamp frequency may produce interference with horizontal synchronization frequency from the display, which might cause line flow on the display. In order to avoid interference, the lamp frequency should be detached from the horizontal synchronization frequency and its harmonics as far as possible. Note 7-6 :Backlight lamp power consumption is calculated by I L×V L. Note 7-7 : The” Max of starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B 3 rd Line 2 nd Line 1 st Line 600 th Line 599 th Line 598 th Line R G B R G B R G B R G B 1 st Pixel 800 th Pixel

1 Pixel = R G B

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 9. Display Color and Gray Scale Reference Note 9-1: 0: Low Level Voltage, 1: High Level Voltage

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 10. Block Diagram 10-1) TFT-module Block Diagram RX0(+/-) RX1(+/-) RX2(+/-) RXC(+/-) U/D L/R VCC GND VL LVDS INPUT / TIMING CONTROLLER SCAN DRIVER IC TFT LCD PANEL (800xR.G.Bx600) DATA DRIVER IC BACKLIGHT UNIT DC/DC CONVERTER & REFERENCE VOLTAGE LAMP CONNECTOR (JST BHR-03VS-1) INPUT CONNECTOR (JAE-FI-SEB20P-HFE or STARCONN 076B20-0048RA-G4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13

11 Interface Timing

11.1) Timing Parameters Note11-1：Because this module is operated by DE only mode, Hsync and Vsync input signals should be set to low logic level or ground. Otherwise, this module would operate abnormally. INPUT SIGNAL TIMING DIAGRAM

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 12. Power On Sequence To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the conditions shown in the following diagram. Power ON/OFF Sequence Note 12-1 Please avoid floating state of interface signal at invalid period. Note 12-2 When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V. Note 12-3 The Backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 13. Optical Characteristics 13-1) Specification: Ta=25 ℃ Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Horizontal θ21.22 80 89 - deg θ12 (12 o’clock) 80 89 - deg Viewing Angle Vertical θ11 (6 o’clock) CR ＞10 80 89 - deg Note 13-2 Contrast Ratio CR θ=0 ° 700 1000 - - Note 13-4 Rise Tr - 13 18 ms Response time Fall Tf θ=0 ° - 12 17 ms Note 13-3 Brightness L θ=0 °/φ=0 380 450 - cd/ ㎡ Note 13-1 Lamp Life Time - - 50000 - - hr At 8mA White Variation δW - - 1.25 1.4 - Note 13-5 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Note 13-1: Topcon BM-5A or BM-7 fast luminance meter 2°field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 8.0 mA. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Field = 2°

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 Note 13-2: The definitions of viewing angles are as follow Note 13-3: Definition of Response Time Tr and Tf 100% 90% 10% White White Brightness Black Tr Tf Note 13-4: The definition of contrast ratio CR Luminance at gray level 63 Luminance at gray level 0 =

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 Note 13-5: Definition of White Variation (δW): Measure the luminance of gray level 63 at 5 points Maximum [L (1), L (2), L (3), L (4), L (5)] δW = Minimum [L (1), L (2), L (3), L (4), L (5)] D/4 D/2 3D/4 W/4 W/2 3W/4 W D Horizontal Line : T est Point X=1 to 5 1 2 3 4 X Active Area Vertical Line

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 15. Reliability Test No Test Item Test Condition

1 High Temperature Storage Test Ta = +80 ℃, 240 hrs

2 Low Temperature Storage Test Ta = -40 ℃, 240 hrs

3 High Temperature Operation Test Ta = +70 ℃, 240 hrs

4 Low Temperature Operation Test Ta = -30 ℃, 240 hrs

5 High Temperature & High

Humidity Operation Test Ta = 60 ℃, 90%RH, 240 hrs 6 Thermal Shock Storage Test -40 ℃, 0.5hour →80 ℃, 0.5hour , 100Cycles,1hrs/cycle

7 Heat Cycle Operation Test -30 ℃, 1hr →70℃, 1hr ,

50Cycles,4hrs/cycle

8 Vibration Test

(non-operating) 1.5G,10 ~ 300 H Z , 10min/cycle ,3cycles each X, Y, Z

9 Shock Test

(non-operating) 200G, 2ms,half sine wave Direction: ±X, ±Y, ±Z Cycle: 1 time

10 ESD Test

(operating) 150pF, 330Ω,1sec/cycle condition 1:Panel contact ±8KV condition 2:Panel non-contact ±15KV Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 16. Packing Diagram

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21

Revision History

Rev. Eng. Issued Date Revised Contents 0.1 蔡弘毅 June,23,2006 Preliminary SPEC 0.2 蔡弘毅 July,25,2006 1.Add 4.Mechanical Drawing of TFT-LCD Module 2.13. Optical Characteristics Add White Variation (typ=1.25 Max=1.4) 0.3 蔡弘毅 Dec.06,2006 1. modify outline drawing. 2. modify RA test condition. 3. modify White Chromaticity. 4. modify item10. Block Diagram