PD1201 CLARE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Description

Ordering Information

Part # Description PD1201 16 Pin DIP (25/Tube) Pin Configuration PD1201 Units AC Operating Voltage 120 V RMS Load Current 1 A On-State V RMS Voltage Drop 1.2 (AT IL = IA) PD1201 Pinout /K31/K36/K31 /K31/K30 /K2B /K4C/K45/K44 /K41/K43 /K4C/K6F/K61/K64 /KD0 /K4C/K45/K44 /K41/K43 /K4C/K6F/K61/K64 /K38 /K5A/K43

www.clare.com PD1201 Rev. 9 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Absolute Maximum Ratings (@ 25˚ C) Parameter Min Typ Max Units Input Power Dissipation - - 150 1 mW Input Control Current - - 50 mA Peak (10ms) - - 1 A Reverse Input Voltage - - 5 V Total Package Dissipation PD - - 1600 2 mW Isolation Voltage Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mW/˚C 2 Derate Linearly 16.6 mW/˚C

Electrical Characteristics

Parameters Conditions Symbol Min Typ Max Units Output Characteristics @ 25°C Peak Blocking Voltage - V DRM - - 400 V Load Current (Continuous) V L=120-240VAC I L 0.005 - 1 A Off State Leakage Current V DRM ILEAK -- 1 m A On-State Voltage Drop I L=1A - - 1.2 V RMS Critical Rate of Rise dv/dt 1000 1200 - V/µS Switching Speeds Turn-on I F=5 mA T ON - - 0.5 Cycles Turn-off I F=5 mA T OFF - - 0.5 Cycles Zero-Cross Turn-On Voltage 1st half cycle - 2 5 V Sub. half cycle - - 1 V Operating Frequency1 - 20 - 500 Hz Load Power Factor for Guaranteed Turn-On2 - PF 0.25 - - - Capacitance Input to Output - - - - pF Input Characteristics @ 25°C Input Control Current For Normal Environment - I F 5- 5 0 m A For High Noise Environment - I F 10 - 100 mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Input Drop-out Voltage - 0.8 - - V Reverse Input Current V R=5V I R -- 1 0 u A Common Characteristics @ 25°C Input to Output Capacitance - C I/O -- 3 V RMS Input to Output Isolation - V I/O 3750 - - V RMS

1 Zero cross 1st 1/2 cycle @ <100Hz

2 Snubber circuits may be required at low power factors.

Rev. 9 PERFORMANCE DATA* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in th e written specifications, please contact our application department. PD1201 Load Current, Free Air Ambient Temperature (°C) Load Current (A) -40 1.2 1.0 0.8 0.6 0.4 0.2 05 58 5 RΘJA = 60°C/W PD1201 Max. Surge Current (Non-Repetitive) Pulse Duration (ms) Peak Surge Current (A) 16 50 100 NOTE: Values apply to TJ = 50°C before Surge PD1201 Typical Forward Voltage vs. Temperature Ambient Temperature (°C) Forward Voltage (V) 2.0 1.5 1.0 0.5 25 50 75 100 125 150 PD1201 Typical dv/dt vs. Temperature Ambient Temperature (°C) Critical Rate of Rise (V/µs) 800 600 400 200 1200 1000 25 50 85 Vo 63% 10% RC Vo = 300V dv 0.63 x 300V 189 dt RC RC In accordance with EIA/NARM Standards RS-443 for Solid State Relays PD1201 dv/dt Method Mechanical Dimensions

16 Pin DIP

7.620 ± .254 (.300 ± .010) 6.350 ± .127 (.250 ± .005) 17.780 TYP. (.700) 19.202 ± .381 (.756 ± .015) 15.240 TYP. (.600) .508 TYP. (.020) 3.429 TYP. (.135)

78 Cherry Hill Drive

Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division

145 Columbia

Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd.

3425 Harvester Road, Suite 202

Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare

1852 West 11th Street, #348

Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles

91160 Champlan

Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12

85077 Manching

Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 http://www.clare.com Worldwide Sales Offices Specification: DS-PD1201-R9 ©Copyright 2000, Clare, Inc. All rights reserved. Printed in USA. 3/23/01 Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, with- out notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct phys- ical harm, injury or death to a person.