PD080SL3

PD080SL3 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 25

Technical content

Datasheet sections

• 1 Application
• 2 Features
• 3 Mechanical Specifications
• 4 Mechanical Drawing of TFT-LCD module
• 5 Connections and Functions for Interface Pins
• 6 Absolute Maximum Ratings
• 7 Electrical Characteristics
• 8 P ixel Arrangement
• 9 D isplay Colors and Input Data Signals
• 10 Input signal timing
• 11 P ower On Sequence
• 12 Optical Characteristics
• 13 Handling Cautions
• 14 Reliability Test
• 15 Pack ing

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 Version : 3.0 TECHNICA L SP ECIFICATION MO DE L NO : PD080SL3 T he content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’ s Confirmation Customer Date By PVI ’ s Confirmation Confirmed By Prepared By P-511-475(V:3) FOR MORE INFORMATION: AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA 92656

Http://www.AZDISPLAYS.com

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:2

Revision History

Rev. En g. Iss ued Date Revise d Content

0.1 Sa rah Huang Oct 29, 2007 P reliminary

1.0 Sa rah Huang Ja n 08, 2008 Add Page 25

15.Packing

2.0 Sa rah Huang Feb 25, 2008

1. Electrical Characteristics: VIH from 0.7VCC~VCC to 0.7VDD~VDD VIL from 0~0.2VCC to 0~0.2VDD 3.0 ᑉሎ Aug,20,2008 Add Page 23 13.Handling Cautions P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:4 1.Application This data sheet applies to a color TFT LCD module; PD080SL3.The module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. P rime View assumes no responsibility for any damage resulting from the use of the device which dose not complies with the instructions and the precautions in these specification sheets. 2. Features . Amorphous silicon TFT LCD panel with LED backlight unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display ColorsΚ262,144 colors or 16,777,216 colors . Backlight driving DC/AC inverter not included in this module 3.Mechanical Specifications Parameter Specifications Uni t Screen Size 8 (d iagonal) inch Display Format 800ͪ(RGB)ͪ600 dot Display Colors 262,144 Active Area 162( H)ͪ121.5 (V) mm Pixel Pitch 0.2025 (H)ͪ0.2025 (V) mm Pixel Configuration St ripe Outline Dimension 200(W)Ø152(H)Ø10.5(D) (typ.) mm Weight 343+ 15 g Back-light 42-L ED Surface treatment Anti-Glare+ SWV Display mode Normally white Gray scale inversion direction 6 (Note 12-1) o’clock P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:5 4. Mechanical Drawing of TFT-LCD Module P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:6 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:7 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:8 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wri tten permission of Prime View International Co., Ltd. Page:9 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:10 DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. (tc: the period of sampling clock) 6. Absolute Maximum Ratings GND=0V, Ta=25ʚ Parameters Symbol MIN. MAX. Uni t Re mark Supply Voltage VDD -0 .3 +4 .0 V Input Signals Voltage VIN -0 .3 VDD+0.3 V Note 6-1 Note 6-1: LVDS signal. 7. Electrical Characteristics 7-1) Recommended Operating Conditions: GND = 0VΔTa = 25к Item Symb ol Min. Typ. Max. Unit Remark Supply Voltage VDD 3 .0 3 .3 3 .6 V Current Dissipation IDD - 153 - m A Note 7-1 Total power consumption P DD 0.46 0 .51 0 .56 W LVDS Differential input high threshold VTH - - 100 m V LVDS Differential input low threshold VTL -100 - - - Note 7-2 High VIH 0 .7 VDD - VDD V Input voltage for DPS & FPC signal Low VIL 0 - 0 .2 VDD V Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below. 1 2345678 1. White 2. Yellow 3. Cyan 4. Green 5. Magenta 6. Red 7. Blue 8. Black IDD current dissipation testing pattern Note7-2 : Please refers to THC63LVDM83A specification by Thin Corporation. This LCD module conforms to LVDS standard. ˋ˃˃ʳ̇˶ ˗˘ˡ˕ ˉˇ˃ʳ̇˶ P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:11 7-2) Recommended Driving Condition for Back Light Ta = 25к P a rameter Symb ol Min TYP MAX Unit Remark Supply voltage of LED backlight VLED - - (11) V Note 7-3 Supply current of LED backlight ILED - 20 - m A Note 7-4 Backlight Power Consumption P LED - - 3 .08 W Note 7-3/7-5 Note 7-3 : ILED= 20mA,constant current Note 7-4 : The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 14 = 280mA Note 7-5 : PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-13 * ILED-13+VLED-14 * ILED-14 VLED-1 VLED-13 VLED-2 VLED-14 Anode Cath ode 7-3) Backlight driving Connector type : BHSR-02VS-1(JST) PIN NO. Symbol Description Re mark 1 + Input terminal (Anode) Red 2 - Input terminal (Cathode) Black 8. P ixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B rd L ine 2 nd L ine st L ine 600 th L ine 599 th L ine 598 th L ine R G B R G B R G B R G B 1 st P ixel 800 th P ixel

1 P ixel = R G B

P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:12 9. D isplay Colors and Input Data Signals P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:13 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:14 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:15 10. Input signal timing: DENB pin have high priority than SYNC mode(HSVC+VSYNC). When IC only use SYNC pin, DENB pin have to connect to ground. (A) Timing Specifications (DENB Mode): Item Symbol Min. T yp. M ax. Uni t Re mark 604 X t3 628 X t3 800 X t3 - Frame Cycling Period t1 14 16 .58 20 m s Vertical Display Period t2 600 X t3 600 X t3 600 X t3 - 920 X t5 1056 X t5 1064 X t5 - Horizontal Scanning Time t3 24 26 .4 33 Ӵs Horizontal Display Period t4 800 X t5 800 X t5 800 X t5 - Clock Cycle t5 20 25 .0 31 .25 ns Clock High Level Time t6 9 .0 - - ns Clock Low Level Time t7 9 .0 - - ns Hold time t8 4 .0 - - ns Set-up time t9 5 .0 - - ns ( B ) Timing Specifications (SYNC Mode) Item Symbol Min. T yp. M ax. Uni t Re mark 24 26 .4 33 u s Period Hp 920 1056 1064 tc Display period Hdp 800 800 800 tc Pulse width Hpw 12 128 202 tc Back-porch Hbp 12 86 202 tc Front-porch Hfp 42 42 42 tc Hpw+Hbp 214 214 214 tc Hsync-CLK Hhc 10 - Tc-10 ns HSYNC Vsync-Hsync Hvh 0 0 200 tc 14 16 .58 20 m s Period (Frame cycling period) Vp 604 628 800 Hp Note 1 Display period Vdp 600 600 600 Hp Pulse width Vpw 2 4 27 Hp Back-porch Vbp 0 23 25 Hp Front-porch Vfp 1 1 1 Hp VSYNC Vpw+Vbp 27 27 27 Hp Note 1: Frame cycling period is optimum in 16.58ms.(60HZ) P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:16 (C)Timing Chart: X,0 X,1 X,2 X,3 X,597 X,598 X,599 X,Y t3 t3 CLK DENB R5~R0 G5~G0 B5~B0 tc CLK DENB R5~R0 G5~G0 B5~B0 0,Y 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y X,Y 797,Y 799,Y 796,Y 798,Y P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:17 ʳʳ˛˦ˬˡ˖ R,G,B valid data Hpw Hp Hbp Hfp Hdp CLK Hhc HSYNC HSYNC VSYNC Hvh P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:18 VSYNC R,G,B valid data Vpw Vp Vbp Vfp Vdp CLK t 6 t 7 t 5 HYSNC VSYNC DENB R7-R0 G7-G0 B7-B0 VALID DATA ˃ˁˈ˩˶˶ CLK a b ˃ˁˈ˩˶˶ Duty ( a ,b ) : 50 +10% t 8 t 9 P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:19 11.Power On Sequence 1. The supply voltage for input signals should be same as VDD. 2. When the power is off, please keep whole signals (Hsync, Vsync, DENB, CLK, Data) low level or high impedance. 12. Optical Characteristics 12-1) Specification: Ta = 25к Parameter Symb ol Con dition MIN. T YP. MAX. Uni t Re marks Horizontal ͐ 55 60 - d eg ͐(to 12 ’clock) 40 45 - d eg Viewing Angle Vertical ͐(to 6 o’clock) CR≥10 55 60 - d eg Note 12-1 Contrast Ratio CR Optimum direction 200 400 - - Note 12-2 Luminance L ͐=0°/͝=0± 390 420 - cd/ʤ Note 12-3 LED Life Time - 25ʚ 20000 30000 - h rs Note 12-4 Rise Tr - 15 30 m s Response time Fall Tf ͐=0± ͝=0± - 25 50 m s Note 12-5 Uniformity U - 75 80 - % Note 12-6 Cross Talk Ratio CTK - - - 3 .5 % Note 12-7 3.0 V 3.0 V0 s< t <35 m s 0 s< t <35 m s Signal Backl ight ˩˗˗ P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:20 The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Note 12-1Κ The definitions of viewing angles are as follows. 12 o’clock 3 o’clock 9 o’clock 6 o’clock θθθθ φφφφ LED connector Note 12-3 : Topcon BM-5A or BM-7 fast luminance meter 1̓field of view is used in the testing Note 12-4: The “LED Life time “ is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25к a nd ILED =20mA. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm TFT-LCD module Optical characteristics measuring configuration Field = 1° P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:21 Note 12-5: Definition of Response Time Tr and Tf: 100% 90% 10% White White Brightness Black Tr Tf Note 12-6: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Lum inance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white. 25% 50% 75% 25% 50% 75% P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:22 ⏐YA-YB⏐ Note 12-7: Cross Talk (CTK) = YA ͪ100% Y A: Brightness of Pattern A YB : Brightness of Pattern B Lum inance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A (Gray Level 31) Pattern B (Gray Level 31, central black box exclusive) : Measuring Point (A and B are at the same point.) YA YB 1/3 1/3 1/3 Black (Gray Level 0) P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:23 13. Handling Cautions 13-1) Mounting of module a) Pl ease power off the module when you connect the input/output connector. b) P olarizer which is made of soft material and susceptible to flaw must be handled carefully. c) P rotective film (Laminator) is applied on surface to protect it against scratches and diets. d) Please following the tear off direction as figure13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) P recautions in mounting a) Wh en metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) W ipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass, which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) S ince CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) D o not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) St ore the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Pl ease adjust the voltage of common electrode as material of attachment by 1 module. Figure 13 -1 the way to peel off protective film P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:24 14. Reliability Test No Tes t I tem Tes t C o ndition

1 High Temperature Storage Test Ta = +80к, 240 hrs

2 L ow Temperature Storage Test Ta = -25к, 240 hrs

3 High Temperature Operation Test Ta =+80к, 240 hrs

4 L ow Temperature Operation Test Ta = -25к, 240 hrs

5 High Temperature & High Humidity

Operation Test Ta = +60к, 90%RH, 240 hrs

6 Thermal Cycling Test

(non-operating) -20к/barb2left/barb2right+80к, 100 Cycles 30 min 30 m in

7 Vibration Test

(non-operating) FrequencyΚ10 ~ 57 HZ , AmplitudeΚ0.15 mm 58~500Hz, 1G Sweep timeΚ11 min ; Test PeriodΚ3 hrs (1 hr for each direction of X, Y, Z)

8 Shock Test

(non-operating) 80G, 6ms, X,Y, Z 1 times for each direction

9 Electron Static Discharge

C=150pF,R=330Ө Contact=±8KVΔAir=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect, no image). All the cosmetic specification is judged before the reliability stress. P-511-475(V:3)

The information contained herein is the exclusive property of Pr ime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior wr itten permission of Prime View International Co., Ltd.Page:25 15.Packing P-511-475(V:3)