PD080SL1

PD080SL1 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 26

Technical content

Datasheet sections

• 1 Application
• 2 Features
• 3 Mechanical Specifications
• 4 Mechanical Drawing of TFT-LCD module
• 5 Connections and Functions for Interface Pins
• 6 Absolute Maximum Ratings
• 7 Electrical Characteristics
• 8 Pixel Arrangement
• 9 Display Colors and Input Data Signals
• 10 Input signal timing
• 11 Power On Sequence
• 12 Optical Characteristics
• 13 Handling Cautions
• 14 Reliability Test
• 15 Packing

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 Version :3.0 TECHNICAL SPECIFICATION MODEL NO : PD080SL1 The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’s Confirmation Customer Date By PVI’s Confirmation Confirmed By Prepared By P-511-393(V:3) FOR MORE INFORMATION: AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA, 92656

Http://www.AZDISPLAYS.com

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2

Revision History

Rev. Eng. Issued Date Revised Content V0.1 රӸ౺ July 25,2006 Preliminary V0.2 රӸ౺ Oct 16,2006 Modify Page6 5-1) TFT-LCD Panel Driving V0.3 රӸ౺ Dec 15,2006 Modify Page4 4. Mechanical Drawing of TFT-LCD Module Add Page26 16.Packing 1.0 රӸ౺ Jan 11, 2006 New 2.0 රӸ౺ May 28, 2007 Modify Page25 14. Reliability Test: LTOT/LTST from-20Ċ to-25 Ċ 3.0 රӸ౺ July 23, 2007 Modify Page6 Modify connect pin P-511-393(V:3)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 1.Application This data sheet applies to a color TFT LCD m odule, PD080SL1.The module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colorsj262,144 colors or 16,777,216 colors . Backlight driving DC/AC inverter not included in this module . Long Life Lamp 3.Mechanical Specifications Parameter Specifications Unit Screen Size 8 (diagonal) inch Display Format 800Ò(RGB)Ò600 dot Display Colors 262,144 Active Area 162(H) Ò121.5 (V) mm Pixel Pitch 0.2025 (H)Ò0.2025 (V) mm Pixel Configuration Stripe Outline Dimension 200(W)Ò152(H)Ò10.5(D) (typ.) mm Weight 343+15 g Back-light CCFL, 2 tubes Surface treatment Anti-Glare Display mode Normally white Gray scale inversion direction 6 (ref to Page 20 viewing angle ) o’clock P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 4. Mechanical Drawing of TFT-LCD Module P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 &UIBO$IFO 1%4- 'SBOL4IJO 'SBOL4IJO P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:10 DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. UD %&/# UD (tc: the period of sampling clock) 6. Absolute Maximum Ratings: GND=0V , T a=25Ċ Parameters Symbol MIN. MAX. Unit Remark Supply Voltage VDD -0.3 +4.0 V Input Signals Voltage VIN -0.3 VDD+0.3 V Note 6-1 Backlight Driving Voltage VL - 2000 V Backlight Driving Frequency FL 25 80 KHz Note 6-1: LVDS signal. 7. Electrical Characteristics 7-1) Recommended Operating Conditions: GND = 0VdTa = 25Ċ Item Symbol Min. Typ. Max. Unit Remark Supply Voltage VDD 3.0 3.3 3.6 V Current Dissipation IDD - 153 - mA Note 7-1 Total power consumption PDD 0.46 0.51 0.56 W LVDS Differential input high threshold VTH - - 100 mV LVDS Differential input low threshold VTL -100 - - - Note 7-2 High VIH 0.7VCC - VCC V Input voltage for DPS & FPC signal Low VIL 0 - 0.2VCC V Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below. 1 2345678 1. White 2. Yellow 3. Cyan 4. Green 5. Magenta 6. Red 7. Blue 8. Black IDD current dissipation testing pattern Note7-2 : Please refers to THC63LVDM83A specification by Thin Corporation. This LCD module conforms to LVDS standard. P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:11 7-2) Recommended Driving Condition for Back Light Item Symbol Min. Typ. Max. Unit Remark Lamp Current IFL 3 5 8 mA 5mA : 420 cd/Ĕ Note 7-3eNote 7-5 Lamp Driving Frequency FL 25 40 80 KHz Lamp Voltage VL - 510 - Vrms IFL=5mAdNote 7-3 Starting Voltage (25Ċ) (Reference Value) Vs - - 960 Vrms Starting Voltage (0Ċ) (Reference Value) Vs - - 1030 Vrms Starting Voltage (-25Ċ) (Reference Value) Vs - - 1120 Vrms Note 7-4 Total power consumption (at IFL=5mA) - - 5.1 8 W Note 7-6 Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible. In order to satisfy the quality of B/L , no matter use what kind of inverter , the each output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-4 : The “Starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. Note 7-5: Lamp current is measured with current meter for high frequency as shown below Inverter TFT-LCD Module A * Pin 4 is Vlow ** Current meter : Yokog awa 2016-01 Lamp current dissipation testing configuration Note 7-6 : Not including the efficiency of backlight DC/AC inverter 7-3) Backlight driving Connector type : “BHR-04VS-1” of Japan Solder less Terminal MFG Co. LTD PIN NO. Symbol Description Remark

1 VL1 Input Voltage(High)

2 VL2 Input Voltage(High)

4 VL4 Input Voltage(Low)

P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:12 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B rd L ine 2 n d Li ne st L ine 600 th L ine 599 th L ine 598 th L ine R G B R G B R G B R G B 1 st P ixel 800 th P ixel

1 P ixel = R G B

1. Display Colors and Input Data Signals P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:13 P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:14 P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:15 P-511-393(V:3)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:16 10. Input signal timing: DENB pin have high priority than SYNC mode(HSVC+VSYNC). When IC only use SYNC pin, DENB pin have to connect to ground. (A) Timing Specifications (DENB Mode): Item Symbol Min. Typ. Max. Unit Remark 604 X t3 628X t3 800 X t3 - Frame Cycling Period t1 14 16.58 20 ms Vertical Display Period t2 600 X t3 600 X t3 600 X t3 - 920 X t5 1056 X t5 1064 X t5 - Horizontal Scanning Time t3 24 26.4 33 DŽs Horizontal Display Period t4 800 X t5 800 X t5 800 X t5 - Clock Cycle t5 20 25.0 31.25 ns Clock High Level Time t6 9.0 - - ns Clock Low Level Time t7 9.0 - - ns Hold time t8 4.0 - - ns Set-up time t9 5.0 - - ns (B) Timing Specifications (SYNC Mode) Item Symbol Min. Typ. Max. Unit Remark 24 26.4 33 us Period Hp 920 1056 1064 tc Display period Hdp 800 800 800 tc Pulse width Hpw 12 128 202 tc Back-porch Hbp 12 86 202 tc Front-porch Hfp 42 42 42 tc Hpw+Hbp 214 214 214 tc Hsync-CLK Hhc 10 - Tc-10 ns HSYNC Vsync-Hsync Hvh 0 0 200 tc 14 16.58 20 ms Period (Frame cycling period) Vp 604 628 800 Hp Note 1 Display period Vdp 600 600 600 Hp Pulse width Vpw 2 4 27 Hp Back-porch Vbp 0 23 25 Hp Front-porch Vfp 1 1 1 Hp VSYNC Vpw+Vbp 27 27 27 Hp Note 1: Frame cycling period is optimum in 16.58ms.(60HZ) P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:17 (C)Timing Chart: X,0 X ,1 X,2 X,3 X,597X,598 X,599 X,Y t3 t3 CLK DENB R5~R0 G5~G0 B5~B0 tc CLK DENB R5~R0 G5~G0 B5~B0 0,Y 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y X,Y 797,Y 799,Y 796,Y 798,Y P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:18 )4:/$ R,G,B valid data Hpw Hp Hbp Hfp Hdp CLK Hhc HSYNC HSYNC VSYNC Hvh P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:19 VSYNC R,G,B valid data Vpw Vp Vbp Vfp Vdp CLK t 6 t 7 t 5 7*) .JO 7DD 7*- .BY 7DD HYSNC VSYNC DENB R7-R0 G7-G0 B7-B0 VALID DATA *OQVU4JHOBM $FOUFS-FWFM 7DD 7*) .JO 7DD 7*- .BY 7DD CLK a b 7DD Duty ( a ,b ) : 50 +10% t 8 t 9 P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:20 11.Power On Sequence 3. 0 V 3. 0 V0 s < t <35 m s 0 s < t <35 m s U U Signa l Backlight 7%% 1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (Hsync, Vsync, DENB, CLK, Data) low level or high impedance. 12. Optical Characteristics 12-1) Specification: Ta = 25Ċ Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Horizontal ǀ 55 60 - deg ǀ(to 6 ’clock) 45 50 - deg Note 12-1 Viewing Angle Vertical ǀ(to 12 o’clock) CR≥10 30 35 - deg Contrast Ratio CR Optimum direction 200 400 - - Note 12-2 Rise Tr - 15 30 ms Response time Fall Tf ǀ=0Ę Ǎ=0Ę - 25 50 ms Note 12-4 Luminance L ǀ=0°/Ǎ=0Ę 390 420 - cd/Ĕ IFL=5mA Note 12-3 Luminance Uniformity U - 75 80 - % Note 12-5 Lamp Life Time - 25Ċ 50000 - - hrs IFL=5mA Cross Talk Ratio CTK - - - 3.5 % Note 12-6 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:21 500 mm +/- 50 mm TFT-LCD module DC/AC Inverter Photometer (TOPCON BM-5A or BM-7 fast) Field = 1° Optical characteristics measuring configuration Note 12-1jThe definitions of viewing angles are as follows. 12 o’clock 3 o’clock 9 o’clock 6 o’clock θ φ Lamp connector Note 12-2 : The definition of contrast ratio $3 -VNJOBODFBUHSBZMFWFM -VNJOBODFBUHSBZMFWFM= Note 12-3jThe typical luminance value is measured at lamp current 5 mA. The max luminance value is measured at lamp current 8 mA. P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:22 Note 12-4: Definition of Response Time Tr and Tf: 100% 90% 10% White White Brightness Black Tr Tf Note 12-5: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 25% 50% 75% 25% 50% 75% P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:23 ⏐YA-YB⏐ Note 12-6: Cross Talk (CTK) = YA Ò100% YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A (Gray Level 31) Pattern B (Gray Level 31, central black box exclusive) : Measuring Point (A and B are at the same point.) YA YB 1/3 1/3 1/3 Black (Gray Level 0) P-511-393(V:3)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:24 13. Handling Cautions 13-1) Mounting of module 4. Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 4. The output from inverter circuit will be unstable. 4. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and diets. It is recommended to peel off the laminator before use and taking care of static electricity. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirement s in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. P-511-393(V:3)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:25 14. Reliability Test No Test Item Test Condition

1 High Temperature Storage Test Ta = +80Ċ, 240 hrs

2 Low Temperature Storage Test Ta = -25Ċ, 240 hrs

3 High Temperature Operation Test Ta =+80Ċ, 240 hrs

4 Low Temperature Operation Test Ta = -25Ċ, 240 hrs

5 High Temperature & High Humidity

Ta = +60Ċ, 90%RH, 240 hrs (No Condensation)

6 Thermal Cycling Test

(non-operating) -20ĊÅÆ+80Ċ, 100 Cycles 30 min 30 min

7 Vibration Test

(non-operating) Frequencyj10 ~ 57 HZ , Amplitudej0.15 mm 58~500Hz, 1G Sweep timej11 min ; Test Periodj3 hrs (1 hr for each direction of X, Y, Z)

8 Shock Test

(non-operating) 80G, 6ms, X,Y, Z 1 times for each direction

9 Electron Static Discharge

C=150pF,R=330Ƹ Contact=±8KVdAir=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect, no image). All the cosmetic specification is judged before the reliability stress. P-511-393(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:26 15.Packing P-511-393(V:3)