PD057VU7

PD057VU7 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 By Confirmed By Prepared By P-511-508(V:4) FOR MORE INFORMATION: AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA 92656

Http://www.AZDISPLAYS.com

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:2

Revision History

Rev. Issued Date E ng. Revised Contents

1.0 May 15, 2008 ᙤ New

2.0 May 19, 2009 ᙤ

Delete backlight connector pin pitch BeforeΚ Connector typeΚJST BHR-03VS-1, PIN No 2 pins, pitch=3.5mm AfterΚ Connector typeΚJST BHR-03VS-1, PIN No 3 pins 3.0 Jun. 19, 2009 ᙤ Icc Max. from 100mA to 75mA 4.0 Jul. 3, 2009 ᙤ LCD Panel Power ConsumptiooǺ Max. from 0.33W to 0.25W Total Power ConsumptionǺ Max. from 2.97W to 2.89W P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:3 TECHNICAL SPECIFICATION

CONTENTS

NO. ITEM PAGE - Cover 1 - Contents 2 - Revision History 3

1 Application 4

2 Features 4

3 Mechanical Specifications 4

4 Mechanical Drawing of T FT-LCD module 5

5 Input / Output Terminals 6

6 Touch Panel Characteristics 7

7 Absolute Maximum Ratings 9

8 Electrical Characteristics 9

9 Pixel Arrangement 10

10 Display Color and Gray Scale Reference 11

11 Interface Timing 12

12 Power On Sequence 15

13 Optical Characteristics 15

14 Handling Cautions 18

15 Reliability Test 19

16 Packing Diagram 20

P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:4 1. Application This data sheet applies to a color TFT LCD module, PD057VU7. PD057VU7 module applies to OA product, car TV (must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. 2. Features . QVGA (320*240 pixels) resolution . Module with resistive type touch panel . Amorphous silicon TFT LCD panel with LED . Pixel in stripe configuration . Thin and light weight . Display ColorsΚ262,144 colors . TTL interface 3. Mechanical Specifications Parameter Specifications Unit Screen Size 5.7 (diagonal) inch Display Format 320ͪ(R,G,B)ͪ240 dot Display Colors 262,144 Active Area 115.20 (H)ͪ86.4 (V) mm Pixel Pitch 0.36(H)ͪ0.36(V) mm Pixel Configuration Stripe Outline Dimension 144(W)Ø104.6 (H)Ø14.45 (D) (typ.) mm Weight 244²10 g Back-light 36-L ED Surface treatment Anti-glare + SWV Display mode Normally white Surface treatment of Touch Panel 3H Gray scale inversion direction 6 o\`clock [ ref. to Note 13-1 ] P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:5 4.Mechanical Drawing of TFT-LCD Module Outline Drawing : Front View (unit : mm) E307459 P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:6 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins Pin No Symbol I/O Description Remark

1 GND - GND

2 CK I Clock signal for sampling each data signal

3 Hsync I Horizontal synchronous signal(neqative)

4 Vsync I Vertical synchronous signal(neqative)

5 GND - GND

6 R0 RED data signal(LSB)

7 R1 I RED data signal

8 R2 I RED data signal

9 R3 I RED data signal

10 R4 I RED data signal

11 R5 I RED data signal(MSB)

12 GND - GND

13 G0 I GREEN data signal(LSB)

14 G1 I GREEN data signal

15 G2 I GREEN data signal

16 G3 I GREEN data signal

17 G4 I GREEN data signal

18 G5 I GREEN data signal(MSB)

19 GND - GND

20 B0 I Blue data signal(LSB)

21 B1 I Blue data signal

22 B2 I Blue data signal

23 B3 I Blue data signal

24 B4 I Blue data signal

25 B5 I Blue data signal(MSB)

26 GND - GND

27 ENAB I Signal to settle the horizontal display position(positive) Note5-1

28 VCC - +3.3V power supply 29 VCC - +3.3V power supply

30 R/L I Horizontal display mode select signal

LΚNormal ,HΚLeft /Right reverse mode Note5-2

31 U/D I Vertical display mode select signal

HΚNormal ,L :Up/Down reverse mode Note5-3

32 V/Q I V GA / QVGA mode select signal Note11-2

33 GND - GND

Note5-1ΚThe horizontal display start timing is settled in accordance with rising of ENAB signal. In case ENAB is fixed ”Low”,the horizontal start timing is determined as described in 10-2. Don\`t keep ENAB”High” during operation. P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:7 Note 5-2 , 5-3ǺThe definitions of U/D & R/L R/L(PIN 30)= Low, U/D(PIN 31)= High R/L(PIN 30)= High , U/D(PIN 31)= Low 5-2) LED Backlight driving Connector type: JST BHR-03VS-1, PIN No 3 pins Pin No Symbol Description Remark 1 + Input terminal (Anode) Red

2 NC No connect -

3 - Input terminal (Cathode) Black 6.Touch Panel Characteristics 6-1) Pin assignmentΚΚΚΚ Pin No. Desi gnation Rem ark

1 YU (Bottom)

2 XL (T op)

3 YL (B otton)

4 X R (Top)

P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:8 6-2) Electrical PerformanceΚΚΚΚ Parameters S ymbol MIN. Typ. MAX. Unit Rem ark X 400 550 810 Ω Terminal Resistance Y 230 320 540 Ω Input Voltage V T - 5 7 V Linearity (X ,Y direction) - - ±1.5 % Insulation Impedance 20 - - MΩ DC 25V Response Time - - 15 ms Operation Force - - 50 g Note 6-1 Note 6-1 Input through R0.8mm stylus or R8.0mm finger. 6-3) Durability Performance 1. Hitting Durability: At least 1,000,000 times with R8.0mm silicon rubber, 250g, 3 times/sec. 2. Sliding Durability: At least 1,00,000 times with R0.8mm polyacetal stylus, 250g, 60 mm/sec. 6-4) Integration Design Guide Avoid the design that Front-case overlap and press on the active area of the touch-panel. Give enough gap (over 0.5mm at compressed) between the front case and touch-panel to protect wrong operating. Use a buffer material ( Gasket) between the touch-panel and front-case to protect damage and wrong operating. Avoid the design that buffer material overlap and press on the inside of touch-panel viewing area. P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:9 Note 6-2 We strongly suggest to follow above design guide to avoid the linear defect happened on the touch panel. 7.Absolute Maximum Ratings: GND=0V, Ta=25к Parameters Symbol Condition MAX. Unit Remark Input Voltage VI Ta=25к -0.3~+4 V Note7-1 +3.3V supply voltage V CC Ta=25к 0~+3.6 V Note7-1:CK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D,V/Q 8.Electrical Characteristics 8-1) Recommended Operating Conditions: GND=0V, Ta=25к Item Symbol Min. Typ. Max. Unit Remark +3.3V Supply Voltage V CC +3.0 +3.3 +3.6 V Permissive input ripple voltage V RF - - 100 mVp-p V CC=3.3V Input voltage(Low) V IL 0 - 0.3 VCC V Input voltage(High) V IH 0.7 V CC - VCC V P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:10 8-2) Recommended Driving Condition for LED Back Light Ta=25к Parameter S ymbol Min. Typ. Max. Unit Rem ark LED voltage V LED - - (11) V Note 8-1 LED current ILED - 20 - mA Note 8-2 Back Light Power Consumption PLED - - 2640 mW Note 8-1 Note 8-3 Note 8-1ΚThe ILED = 20 mA (Constant current) Note 8-2ΚThe LED driving condition is defined for each LED module. (3 LED Serial) The input current= 20 mA*12=240 mA. Note 8-3ΚPLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-11 * ILED-11+VLED-12 * ILED-12 8-3) Power Consumption Parameters Symbol Typ. Max. Unit Remark +3.3V Current Dissipation I CC 67 75 mA LCD Panel Power Consumption - 0.22 0.25 W Note 8-4 Total Power Consumption - - 2.89 W Note 8-4ΚThe power consumption for back light is not included. 9. Pixel Arrangement The LCD module pixel arrangement is stripe configuration. Anode Cathode P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:11 10. Display Color and Gray Scale Reference Input Color Data Color Red Green Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Basic Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red (02) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 D a r k e r Red ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ B r i g h t e r Red (61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Green (02) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 D a r k e r Green ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ B r i g h t e r Green (61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 Green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 D a r k e r Blue ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ B r i g h t e r Blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 Blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:12 11. Interface Timing 11-1) Timing Parameters Characteristics Symbol Min. Typ. Max. Unit Remark - 25.18 28.33 MHz V/Q=H Frequency 1/Tc - 6.3 7.0 MHz V/Q=L Clock Duty ratio Tch/Tc 40 50 60 % V/Q=L Set up time Tds 5 - - Data Hold time Tdh 10 - - ns 30.0 31.8 - us TH 700 800 900 clock V/Q=H 50.0 63.6 - us Cycle TH 360 400 450 clock V/Q=L Horizontal sync. signal Pulse width THp 2 96 200 clock TV 515 525 560 V/Q=H Cycle TV 251 262 280 line V/Q=L Vertical sync. signal Pulse width TVp 2 - 34 line Horizontal display period THd 320 Clock Hsync.-Clock phase difference THc 10 - Tc-10 ns Hsync.-Vsync. phase difference TVh 0 - TH-THp ns 34 V/Q=H Vertical sync. signal start position TVs 7 line V/Q=L Note11-1ΚIn case of lower frequency, the deterioration of the display quality, flicker etc., may occur. Parameter symbol Min. Typ Max Unit Remark Set up time Tes 5 - Tc-10 ns Enable signal Pulse width Tep 2 320 TH-10 clock 44 - TH-664 V/Q=H Hsync-Enable signal phase difference The 2 - TH-340 clock V/Q=L Note11-2Κ When ENAB is fixed at “V/Q=Low”, the display starts from the data of C52 (clock). When ENAB is fixed at “V/Q=High”, the display starts from the data of C104 (clock). P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:13 11-2) Timing Diagram Д THp Horizontal sync. Signal (Hsync) Clock signal (CK) Data signal (R0~R5,G0~G5, B0~B5) Data Enable signal (ENAB) 0.7VDD 0.7VDD 0.3VDD THc 0.7VDD CN*1 Tds Tdh Horizontal invalid data period D1 D320 Number of H-data 0.3VDD 0.7VDD THd Tep The Tes Tcl Tch Tc 0.7VDD 0.7VDD Horizontal invalid data period TH 0.3VDD *1 When ENAB is fixed at V/Q=”H”, the display starts from the data of C104 (Clock). When ENAB is fixed at V/Q=”L”, the display starts from the data of C52 (Clock). P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:14 TV 0.3VDD Vertical sync.Signal(Vsync) Data signal(R0~R5,G0~G5, B0~B5) Verticla invalid d ata period 0.7VDD TVp 0.3VDD TVh 0.7VDD Horizontal sync.Signal(Hsync) 1line 2line Nline DH1 DH2 DH240 Verticla invalid d ata period TVs TVd *2 The vertical display position (TVs) is fixed at 34th line (V/Q=H) and 7th line (V/Q=L). P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:15 12. Power On Sequence VDD 3.0V 0.3V 3.0V t1 t2 t3 Signal*3 1. 0 Іt1Љ20ms 2. 0 Іt2Љ50ms 3. 0 Іt3Љ1s 13. Optical Characteristics 13-1) Specification: Ta=25к Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Horizontal Ӱ 55 60 - deg Note 13-1 Ӱ(to 6 o’clock) 45 50 - deg Viewing Angle Vertical Ӱ(to 12 o’clock) CRЊ10 35 40 - deg Contrast Ratio CR At optimized viewing angle 300 600 - - Note 13-2 Rise Tr - 15 30 ms Response time Fall Tf Ӱ=0̓ - 25 50 ms Note 13-3 Brightness - Ӱ=0°/ӽ=0 500 600 - cd/ф Note 13-5 Luminance Uniformity U% 80 85 - % Note 13-6 x 0.27 0.31 0.35 - White Chromaticity y 0.30 0.34 0.38 - LED Life Time - 20000 - - hrs Note 13-4 10ms 10ms Back Light ON OFF OFF P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:16 Note 13-1ΚThe definitions of viewing angles are as follow Note 13-2ΚThe definition of contrast ratio PatternBlack at Luminance Pattern at White LuminanceCR = Note 13-3ΚDefinition of Response Time Tr and Tf 100% 90% 10% White White Brightness Black Tr Tf Note 13-4ΚThe “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25к and I LED = 240mA. LED P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:17 Note 13-5ΚAll optical measurements shall be performed after backlight being turned-on for 30 mins. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Note 13-6ΚThe uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (T OPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicu lar to the surface of module The test pattern is white. 1/6 1/6 2/6 2/6 Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm TFT-LCD module Optical characteristics measuring configuration Field = 1° P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:18 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. d) Please following the tear off direction as figure 14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 14-2) Precautions in mounting a) When metal part of the T FT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease i mmediately. Long contact with water may cause discoloration or spots. c) T FT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Don\`t expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric disc harge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please ad just the voltage of common electrode as material of attachment by 1 module. 14-5) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to match up with the rubbing direction. Figure 14-1 the way to peel off protective film P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:19 15. Reliability Test No Test Item Test Condition Remark

1 High Temperature Storage Test Ta = +85к, 240 hrs

2 Low Temperature Storage Test Ta = -40к, 240 hrs

3 High Temperature Operation Test Ta = +80к, 240 hrs

4 Low Temperature Operation Test Ta = -30к, 240 hrs

High Temperature & High Humidity Operation Test Ta = +60к, 90%RH, 240 hrs (No Condensation) Thermal Cycling Test (non-operating) -20к/barb2right+70к, 200 Cycles 30 min 30 min Vibration Test (non-operating) Frequency: 10 ~ 57 HZ /Vibration Width:0.075 mm 58-500 Hz / Gravity: 9.8m/s2 Sweep time: 11 minutes Test period: 3 hrs for each direction of X, Y, Z Shock Test (non-operating) Gravity: 490m/s2 * 6ms Direction: ̈́X, ̈́Y, ̈́Z 3 times for each direction

9 Electrostatic Discharge Test

(non-operating) Machine Mode = ̈́200V C = 200pF , R = 0Ө 1 times discharge for each pad

10 Hitting Durability Test

(Touch panel) 1,000,000 times, with R 8.0 mm silicon rubber, 250g, 3times/sec

11 Sliding Durability Test

(Touch panel) 1,00,000 times, with R 0.8 mm polyacetal stylus, 250g, 60mm/sec Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (IncludingΚline defect, no image) All the cosmetic specification is judged before the reliability stress. P-511-508(V:4)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of Prime View International Co., Ltd. Page:20 16. Packing Diagram P-511-508(V:4)