DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

vs. Current Probe for Measurement Simply ReliablePCS-1000I PCS-1000I Connection Comparison PCS-1000I Conducts Simultaneous Voltage and Current Measurement Shunt Resistor Conducts Current and Voltage Measurement Conventional Shunt Meter Conducts Current and Voltage Measurement PCS-1000I high precision AC and DC shunt meter can simultaneously measure current and voltage with the maximum 6 measurement resolution. The above diagram1/2 shows the connection method of simultaneous measurement. Compared with the test of conventional meters from other brands, PCS-1000I is simple in connection and there is no requirement of any additional instrument. Isolated Output Current Output Design PCS-1000I adopts isolated current output design. Its BNC output can directly connect with an oscilloscope to avoid measurement errors resulted from the common ground of oscilloscope's analog input measurement. PCS-1000I can simultaneously measure current and voltage with 6 measurement resolution. The below diagram shows the connection method of simultaneous measurement. Compared with the test of conventional meters from other brands, PCS-1000I is simple in connection and there is no requirement of any additional instrument. 1.This method requires one shunt meter, one current meter to increase current measurement resolution, and one voltage meter to measure voltage 2.Complex connection 3.For data communication with a PC, the PC must be connected to two meters 1.One voltage meter is needed to measure voltage on shunt and the voltage will be converted to current. For simultaneous voltage and current measurement, one extra voltage meter is required 2.Complex connection 3.For data communication with a PC, the PC must be connected to two voltage meters 1.Only one PCS-1000I is needed to measure voltage and current 2.Easy connection 3.USB and GPIB communications on the rear panel can be used for data communication while connecting with a PC

APPLICATIONS

ISOLATED OUTPUT HIGH PRECISION CURRENT SHUNT METER GW Instek rolls out the new PCS-1000I isolated output high precision current shunt meter, which inherits the simultaneous voltage and current measurement function of PCS-1000. PCS-1000I adopts five sets of independent shunt resistors to provide five current measurement levels, including 300A, 30A, 3A, 300mA, and 30mA to meet the requirements of different current level measurements. Internally, PCS-1000I utilizes two sets of 24bits ADCs and low temperature coefficient electronic components to mainly focus on the current measurement of power supply devices. High precision PCS-1000I can be used in adjusting and calibrating instruments. Additionally, temperature variation will not cause PCS-1000I to yield any measurement errors. PCS- 1000I can automatically select optimal measurement level with the maximum resolution so as to replace manual selection to save operational time. Power Supply Analysis Power Supply Measurement Application R & D and Laboratory Application Quality Inspection Test Precision Measurement

FEATURES

6 Digit Voltage and Current

Simultaneous Current and Voltage Measurement Five Current Measurement Levels(AC & DC) : 30mA/300mA/3A/30A/300A AC Voltage Measurement Levels : 200mV/2V/20V/200V/600V DC Voltage Measurement Levels : 200mV/2V/20V/200V/1000V Standard : USB & GPIB CE Verification Rear Panel Front Panel PCS-1000I provides a BNC output, which can connect with an oscilloscope to directly observe current waveform variation without using a current probe. General oscilloscopes do not have isolated channels and their input and output are structured at a common point, therefore, the output load will likely result in measurement errors. PCS-1000I's isolated current output design can prevent measurement errors from an oscilloscope with non-isolated outputs. PCS-1000I, a high precision AC/DC current shunt meter, not only provides USB and GPIB communications interfaces for users to remotely control the instrument but also conducts simultaneous voltage and current measurements. The SCPI communications commands of PCS-1000I allow users to remotely control PCS-1000I via a PC to operate measurement data readbacks.

CS1000GD1DHSpecifications subject to change without notice.

ORDERING INFORMATION

PCS-1000I Isolated Output High Precision Current Shunt Meter GTL-105A Alligator Clip Test Lead (3A Max) GTL-207 Banana Plug Test Lead GTL-240 USB Cable PCS-001 Basic Accessory Kit Quick Operation Guide, User Manual (CD) x 1, AC Power Cord x 1 (Region Dependant), OPTIONAL ASSESSORIES GRA-419-J Rack Mount Adapter (JIS) GRA-419-E Rack Mount Adapter (EIA)

100 V/120 V/220 V/240 V ±10%

Full accuracy for 0 ~ 55 , Full accuracy to 80% R.H. at 40 ℃℃ ℃ -40 ~ 70℃℃ Max 35VA 210(W) x 80(H) x 390(D)mm ; Approx. 5 kg Power Supply Power Line Frequency Operating Environment Storage Environment Power Consumption Dimensions Weight Accuracy specification : ±(% of reading + % of range);voltage input resistance: 10M for all DC voltage rangesΩ Accuracy specification : ±(% of reading + % of range) Accuracy specification : ±(% of reading + % of range) Accuracy specification : ±(% of output + % of full scale); monitor output voltage for the full scale current = 3V; The specifications are only applicable when the input is 10% or greater of the full scale range Accuracy specification : ± (% of reading + % of range) Accuracy specification : ±(% of output + % of full scale);monitor output voltage for the full scale current = 3V Range Range Range Range Range Range <.V04 0.00001mA 0.0001mA 0.000001A 45Hz 2kHz 2kHz 10kHz 10kHz 20kHz 45Hz 2kHz~ 45Hz 2kHz~ 2kHz 10kHz~ 2kHz 10kHz~ 45Hz 400Hz~ 45Hz 400Hz~ 0.00001A 0.0001A <.V05 <.V08 <.V08 <.V08

1 Year 23 ± 5℃℃

0.0050 + 0.0035 0.01 0 005+. 0.1 0 05+. 0.1 0 05+. 0.1 0 05+. 0.5 + 0.05 1.0 + 0.05 2.0 + 0.10 0.5 + 0.05 0.2 + 0.05 0.5 + 0.05 0.5 + 0.05 1.0 + 0.05 0 5 + 0.05. 0.1 0 05+. 0.01 0 005+. 0.01 0 005+. 0.01 0 005+. 0.02 0 005+. 0.0050 + 0.0010 0.0050 + 0.0010 0.0050 + 0.0010 0.0050 + 0.0020 Temperature Coefficient/℃ Temperature Coefficient/℃ Temperature Coefficient/℃ Temperature Coefficient/℃ Temperature Coefficient/℃ Temperature Coefficient/℃ 0.0005 + 0.0005 0.001 0 002+. 0.001 0.005 0 005+. 0.03 0 006+. 0.001 0.001 0.001 0.001 0.001 0.03 0 006+. 0.03 0 006+. 0.03 0 006+. 0.03 0 006+. 0.005 0 005+. 0.005 0 005+. 0.005 0 005+. 0.005 0 005+. 0.001 0.001 0.001 0.001 0.001 0 002+. 0.001 0 002+. 0.001 0 002+. 0.001 0 002+. 0.0005 + 0.0001 0.0005 + 0.0001 0.0005 + 0.0001 0.0005 + 0.0001 Burden Voltage Resolution(6 1/2) Frequency Frequency Frequency DC Accuracy AC Accuracy SPECIFICATIONS (The specifications apply when the PCS-1000I is powered on for at least 30 minutes to warm-up to a temperature of 18 ~ 28 , unle ss specified otherwise.) *1 The accuracy for 30A/300A levels must be increased by a power factor of 8 ppm/watt. Note: GENERAL DC CHARACTERISTICS AC CHARACTERISTICS DC Voltage DC Current Isolated DC Current Monitor Accuracy True RMS AC Voltage True RMS AC Current Isolated AC Current Monitor Accuracy U.S.A. Subsidiary INSTEK AMERICA CORP. 5198 Brooks Street Montclair, CA 91763, U.S.A. TF+1-909-399-3535 +1-909-399-0819 E-mail: sales@instekamerica.com Japan Subsidiary TEXIO TECHNOLOGY CORPORATION. Korea Subsidiary Room No.503, Gyeonginro 775 (Mullae-Dong 3Ga, Ace Hightech-City B/D 1Dong), Yeongduengpo-Gu, Seoul 150093, Korea. +82-2-3439-2205 E-mail : gwinstek@gwinstek.co.kr TF +82-2-3439-2207 GOOD WILL INSTRUMENT KOREA CO., LTD. 7F Towa Fudosan Shin Yokohama Bldg., 2-18-13 Shin Yokohama, Kohoku-ku, Yokohama, Kanagawa, 222-0033 Japan TF+81-45-620-2305 +81-45-534-7181 E-mail: info@texio.co.jp No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan GOOD WILL INSTRUMENT CO., LTD. Global Headquarters TF+886-2-2268-0389 +886-2-2268-0639 E-mail: marketing@goodwill.com.tw China Subsidiary E-mail: marketing@instek.com.cn Malaysia Subsidiary No. 1-3-18, Elit Avenue, Jalan Mayang Pasir 3,

11950 Bayan Baru, Penang, Malaysia

TF+604-6111122 +604-6115225 E-mail: @goodwill.com.mysales GOOD WILL INSTRUMENT (M) SDN. BHD. GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. No. 521, Zhujiang Road, Snd, Suzhou Jiangsu 215011 China TF+86-512-6661-7177 +86-512-6661-7277 GOOD WILL INSTRUMENT EURO B.V. De Run 5427A, 5504DG Veldhoven, THE NETHERLANDS TF+31(0)40-2557790 +31(0)40-2541194 Europe Subsidiary Simply Reliable www.gwinstek.com www.facebook.com/GWInstek 200.0000 mV 30 00000 mA. 30 00000 mA. 200 0000 mV. 300 0000 mA. 300 0000 mA. 2 000000 V. 3 000000 A. 3 000000 A. 20 00000 V. 30 00000 A. 30 00000 A. 200 0000 V. 300 0000 A. 300 0000 A. 600 000 V. 30 00000 mA. 30 00000 mA. 300 0000 mA. 300 0000 mA. 3.000000 A 3 000000 A. 30 00000 A. 30 00000 A. 300 0000 A. 300 0000 A. 2.000000 V 20.00000 V 200.0000 V 1000.000 V 0.2 0 05+.