PCMFXHDMI14S NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
1.1 General description
while unwanted common-mode signals are attenuated. Each differential channel incorporates two signal lines that are coupled by integrated coils.
1.2 Features and benefits
1.3 Applications
Table 1. Product overview
PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Table 2. Pinning
PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Table 3. Ordering information Table 4. Marking codes Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers.
6.1 Channel characteristics
[1] This parameter is guaranteed by design. [2] 100 ns Transmission Line Pulse (TLP); 50 ; pulser at 70 ns to 90 ns.
6.2 Frequency characteristics
[1] Normalized to attenuation at 1 MHz. Table 6. Channel characteristics Tamb =2 5 C unless otherwise specified. Table 7. Frequency characteristics
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 5 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection Fig 1. Differential-mode insertion loss; typical valu es Fig 2. Common-mode insertion loss; typical values tr = 200 ps Fig 3. Differential crosstalk; typical values Fig 4. Differential Time Domain Reflectometer (TDR) plot; typical values aaa-019777 Sdd21 (dB) f (Hz) 107 1010109108 S21dd pin 5 - 6 S21dd pin 1 - 2 f (Hz) 107 1010109108 aaa-019778 -30 -20 -40 -10 Scc21 (dB) -50 S21cc pin 5 - 6 S21cc pin 1 - 2 aaa-021982 -40 -60 -20 Sdd21 (db) -80 f (Hz) 107 10111010108 109 Mag S21dd A3 - A4 > C1 - C2 Mag S21dd A5 - A6 > C1 - C2 t (ns) aaa-019779 105 115 Zdif (Ω) Z reference Z DUT
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 6 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection Pixel clock: 297 MHz Vertical scale: 200 mV/div Horizontal scale: 67 ps/div Offset: 33.4 mV Fig 5. HDMI1.4 eye diagram, test boar d with PCMF2HDMI14S; typical values Pixel clock: 297 MHz Vertical scale: 200 mV/div Horizontal scale: 67 ps/div Offset: 29.6 mV Fig 6. HDMI1.4 eye diagram, test bo ard without device; typical values
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 7 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection The device uses an advanced clamping structure showing a negative dynamic resistance. This snapback behavior strongly reduces the clamping voltage to the system behind the ESD protection during an ESD event. Do not connect unlimited DC current sources to the data lines to avoid keeping the ESD protection device in snapback state after exceeding breakdown voltage (due to an ESD pulse for instance). Transmission Line Pulse (TLP) = 100 ns; tr = 1 ns Transmission Line Pulse (TLP) = 100 ns; t r = 1 ns Fig 7. Dynamic resistance with positive clamping; typical values Fig 8. Dynamic resistance with negative clamping; typical values Very-Fast Transmission Line Pulse (VF-TLP) = 5 ns; tr = 600 ps Very-Fast Transmission Line Pulse (VF-TLP) = 5 ns; tr = 600 ps Fig 9. Dynamic resistance with positive clamping; typical values Fig 10. Dynamic resistance with negative clamping; typical values VCL (V) 02 5 2010 155 aaa-019781 I (A) VCL (V) -25 0 -5-15 -10-20 aaa-019782 -15 -10 -20 I (A) -25 VCL (V) 02 5 2010 155 aaa-021984 I (A) VCL (V) -25 0 -5-15 -10-20 aaa-021983 -15 -10 -20 I (A) -25
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 8 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection 7. Application information The device is designed to provide high-level ESD protection and common-mode filtering for differential high-speed data line pairs such as:
- HDMI 1.4
- Transition-Minimized Differential Signaling (TMDS)
- DisplayPort
- external Serial Advanced Technology Attachment (eSATA)
- Low Voltage Differential Signaling (LVDS) When designing the PCB, give careful consideration to impedance matching and signal coupling. Do not connect the protected signal lines to unlimited current sources like, for example, a battery. According to IEC 61000-4-5 (8/20 s) According to IEC 61000-4-5 (8/20 s) Fig 11. Dynamic resistance with positive clamping; typical values Fig 12. Dynamic resistance with negative clamping; typical values VCL (V) 01 0 8462 aaa-022150 I (A) VCL (V) -10 0 -2-6 -4-8 aaa-022151 I (A) -10
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 9 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection 8. Package outline Fig 13. Package outline WLCSP5 (PCMF1HDMI14S) ReferencesOutline version European projection Issue date IEC JEDEC JEITA PCMF1HDMI14S pcmf1hdmi14s_po Unit mm max nom min 0.60 0.38 0.82 1.22 A Dimensions (mm are the original dimensions) WLCSP5: wafer level chip-size package; 5 bumps (2-1-2) PCMF1HDMI14S A1 b 0.31 DEee 1 e2 0 1 mm scale detail X A X A B C E D e b 1/2 e bump A1 index area bump A1 index area 15-10-22 16-07-18
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 10 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection Fig 14. Package outline WLCSP10 (PCMF2HDMI14S) ReferencesOutline version European projection Issue date IEC JEDEC JEITA PCMF2HDMI14S pcmf2hdmi14s_po Unit mm max nom min 0.60 0.38 1.62 1.52 1.22 A Dimensions (mm are the original dimensions) WLCSP10: wafer level chip-size package; 10 bumps (4-2-4) PCMF2HDMI14S A1 b 0.31 DEee 1 e2 0.800.26 0.54 0.36 1.120.21 0 1 mm scale 15-10-22 16-07-18 detail X A X A B C E D B2B1 bump A1 index area bump A1 index area e b 1/2 e
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 11 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection Fig 15. Package outline WLCSP15 (PCMF3HDMI14S) ReferencesOutline version European projection Issue date IEC JEDEC JEITA PCMF3HDMI14S pcmf3hdmi14s_po Unit mm max nom min 0.60 0.38 2.42 1.22 0.80 A Dimensions (mm are the original dimensions) WLCSP15: wafer level chip-size package; 15 bumps (6-3-6) PCMF3HDMI14S A1 b 0.31 DEee 1 e2 0.80 0 1 mm scale detail X A D E bump A1 index area bump A1 index area X e b 12 4 36 5 A B C 1/2 e B1 B2 B3 15-10-22 16-07-18
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 12 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection 9. Soldering Fig 16. Soldering footprint WLCSP5 (PCMF1HDMI14S) WLCSP5: Solder footprint and stencil aperture PCMF1HDMI14S pcmf1hdmi14s_fr solder resist opening (SR) occupied area solder land plus solder paste solder paste deposit (SP) solder land (SL) Dimensions in mm SRP 0.25 0.325 Hx 1.00 SL 0.25 SP 0.40 15-10-22 16-07-18 Hy 1.40 SL = SP SR detail X see detail X P P Hx Hy recommend stencil thickness: 0.1 mm
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 13 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection Fig 17. Soldering footprint WLCSP10 (PCMF2HDMI14S) Fig 18. Soldering footprint WLCSP15 (PCMF3HDMI14S) WLCSP10: Solder footprint and stencil aperture PCMF2HDMI14S pcmf2hdmi14s_fr solder resist opening (SR) occupied area solder land plus solder paste solder paste deposit (SP) solder land (SL) Dimensions in mm P1 SRP 0.80 0.25 0.325 Hx 1.80 SL 0.25 SP 0.40 15-10-22 16-07-18 Hy 1.40 SL = SP SR detail X see detail X P P Hx Hy recommend stencil thickness: 0.1 mm WLCSP15: Solder footprint and stencil aperture PCMF3HDMI14S pcmf3hdmi14s_fr solder resist opening (SR) occupied area solder land plus solder paste solder paste deposit (SP) solder land (SL) Dimensions in mm P1 SRP 0.80 0.25 0.325 Hx 2.60 SL 0.25 SP 0.40 15-10-22 16-07-18 recommend stencil thickness: 0.1 mm Hy 1.40 SL = SP SR detail X see detail X P P Hx Hy
PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Table 8. Revision history
- Product status changed PCMFXHDMI14S_SER v.1 20160721 Preliminary data sheet - -
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 15 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection 11. Legal information
11.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com .
11.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request vi a the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer , unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.
11.3 Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purpos es only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to av oid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved PCMFXHDMI14S_SER All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 1 — 15 September 2016 16 of 17 Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive app lications beyond Nexperia’s standard warranty and Nexperia’s product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com
Nexperia PCMFXHDMI14S series Common-mode EMI filter for differential channels with ESD protection 13. Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: