PC50CND10RP CARLOGAVAZZI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Specifications are subject to change without notice (28.02.2006) 1 Photoelectrics

  • Range: 1 m
  • Adjustable sensitivity
  • Modulated, infrared light
  • Supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz
  • Output: Relay 3 A, 30 VDC, 240 VAC
  • Make and break switching function
  • LED-indication for output ON, signal stability and supply ON
  • Protection: reverse polarity, transients
  • High degree of EMC Ordering KeyProduct Description Type Selection Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Housing Range Ordering no. W x H x D (S n) Make and break switching 17 x 50 x 50 mm 1 m PC 50 CND 10 RP Specifications Rated operating distance (Sn) Up to 1 m, reference target Kodak test card R 27, white, 90% reflectivity, 200 x 200 mm Blind zone Max. 10 cm Sensitivity Adj. by single-turn pot. meter Temperature drift ≤ 0.5%/°C Hysteresis (H) Differential travel 3-20% Rated operational volt. (UB ) 12 to 240 VDC 24 to 240 VAC, 50 to 60 Hz Rated operational power ≤2.0 VA (relay ON) Output Contact ratings Resistive loads AC 1 3 A/250 VAC DC 1 3 A/30 VDC (> 10 mA/5 VDC) Mechanical life (typical) ≥15 x 106 operations Electrical life (typical) ≥1 x 105 operations at 3 A/240 VAC Protection Reverse polarity, transients Light source GaAlAs, LED, 880 nm Light type Infrared, modulated Sensing angle ± 2° at 1/2 range Ambient light Max. 5’000 lux Operating frequency 20 Hz Response time OFF-ON (tON) ≤25 ms ON-OFF (tOFF) ≤25 ms Power ON delay (tv) ≤300 ms Output function Light and dark operation is switch selectable Indication function Output ON LED, yellow Supply ON, signal stability LED, green Environment Overvoltage category II (IEC 60664/60664A; 60947-1) Pollution degree 3 (IEC 60664/60664A; 60947-1) Degree of protection IP 67 (IEC 60529; 60947-1) Temperature Operating -20° to +60°C (-4° to +140°F) Storage -25° to +80°C (-13° to +176°F) Vibration 10 to 150 Hz, 0.5 mm/7.5 g (IEC 68-2-6) Shock 2 x 1 m & 100 x 0.5 m (IEC 68-2-32) Rated insulation voltage 250 VAC (rms) Housing material Body PC/ABS, grey, reinforced Front glass PC black Mounting bracket Steel, galvanized Connection Cable PVC, grey, 2 m, 5 x 0.34 mm2 Weight 130 g Approvals UL, CSA CE-marking Yes Type PC50CND10RP PC50CND10RP The PC50CND. is a general purpose diffuse-reflective sen- sor in a compact squared 17 x 50 x 50 mm reinforced PC/ABS-housing. It is useful in applications where basic sensors provide adequate sensing performance. The long sensing range in addition to sensitivity adjustment gives a very flexible sensor. Light and dark operation is switch selectable.

2 Specifications are subject to change without notice (23.01.03) PC50CND10RP Detection Diagram 0 200,0 400,0 600,0 800,0 1000,0 1200,0 150,00 100,00 50,00 0,0 -50,00 -100,00 -150,00 BU BN GY BK WH 12-240 VDC 24 - 240 VAC

3 A/250 VAC

3 A/30 VDC

μ Wiring Diagram Dimensions 11.3 35.2 35.2 50 21 21.4 24.85 41.4 24.8521 o 1921.15 R2.3 Ø4.45 R2.3 Operation Diagram tv = Power ON delay Power supply Object/target present Break (NC) Output ON Make (NO) Output ON Excess Gain Y X Sensor R27 Kodac test card Signal Stability Excess gain Time 150% 100% 70% Green LED ON Yellow LED ON Light/dark DistanceLED´s Sensing range (mm) Excess gain Sensing range (mm) (mm)

Specifications are subject to change without notice (23.01.03) 3 Delivery Contents

  • Photoelectric switch: PC50CND..
  • Installation instruction
  • Mounting bracket APC50-1
  • Packaging: Cardboard box Accessories
  • Screwdriver for adjustment:77-001 For further information refer to “Accessories” PC50CND10RP Installation Hints Relief of cable strain Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/ current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided 6.5 ø6.5 R4 ø6.5 6.25 R2.25 9ø4.5 4.5 16.5 ø4.5 R28 4.5 ° 90° Mounting bracket APC50-1