PG24064B-O P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Datasheet sections
240 Column X 64 Row
Graphic Liquid Crystal Display
03.06.07 Rev 0
- Part Number Breakdown
- Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3)Don’t disassemble the LCM. (4)Don’t operate it above the absolute maximum rating. (5)Don’t drop, bend or twist LCM. (6)Soldering: only to the I/O terminals. (7)Storage: please storage in anti-static electricity container and clean environment. 3. General Specification Item Dimension Unit Number of Dots 240 x 64 － Module dimension(None Backlight ) 180.0 x 65.0 x 11.0（MAX） mm Module dimension(With Backlight ) 180.0 x 65.0 x 16.0（MAX） mm View area 132.2 x 39.2 mm Active area 127.16 x 33.88 mm Dot size 0.49 x 0.49 mm Dot pitch 0.53x 0.53 mm LCD type STN Duty 1/64 View direction 6 o’clock or 12 o’clock Backlight Type None, YELLOW-GREEN backlight, WHITE backlight
- Absolute Maximum Ratings Item Symbol Min Max Unit Input V oltage V I -0.3 VDD+0.3 V Supply V oltage For Logic VDD-V SS -0.3 7.0 V Supply V oltage For LCD V DD-V0 0 16 V Operating Temp. Top 0 50 °C Standard Temperature LCM Storage Temp. Tstr -10 60 °C Operating Temp. Top -20 70 °C Wide Temperature LCM Storage Temp. Tstr -30 80 °C 5. Electrical Characteristics Item Symbol Condition Min Typ Max Unit Supply V oltage For Logic V DD-VSS － 4.5 5.0 5.5 V Supply V oltage For LCD V DD-V0 Ta=25°C 12.0 12.5 13.2 V Input High V olt. V IH － 0.7 VDD － VDD V Input Low V olt. V IL － VSS － 0.3 VDD V Supply Current I DD V DD=5V 9.0 9.9 12.0 mA Supply V oltage of Yellow-green backlight VLED Forward current =630 mA Number of LED die 2x63= 126 3.8 4.2 4.3 V Supply V oltage of White backlight VLED Forward current =60 mA Number of LED die 2.8 3.1 3.3 V
- Optical Characteristics Item Symbol Condition Min Typ Max Unit (V)θ CR ≥2 -20 － 35 deg View Angle (H)φ CR ≥2 -30 － 30 deg Contrast Ratio CR － － 3 － － T rise － － － 250 ms Response Time T fall － － － 250 ms Definition of Operation Voltage (Vop) Definition of Response Time ( Tr , Tf ) Driving Voltage(V) Intensity Cr Max 100％ Vop Selected Wave Non-selected Wave [positive type] Cr = Lon / Loff Intensity 90％ 100％ Tr 10％ Tf Non-selected Conition Non-selected ConitionSelected Conition [positive type] Conditions : Operating V oltage : V op Viewing Angle( θ，φ) : 0°， 0° Frame Frequency : 64 HZ Driving Waveform : 1/N duty , 1/a bias Definition of viewing angle(CR ≥2) θ f φ = 180° φ = 90° φ = 0° φ = 270° θ b θ rθ l
- Interface Pin Function Pin No. Symbol Level Description
1 FGND Frame GND
2 V SS 0V Ground
3 V DD 5.0V Supply V oltage for logic
4 V0 Supply voltage for LCD
5 /WR H/L Write Data into T6963C 6 /RD H/L Read Data from T6963C 7 /CS H/L Chip enable for T6963C
8 C/D H/L Command/Data
9 NC NC
11 DB0 H/L Data bit 0
12 DB1 H/L Data bit 1
13 DB2 H/L Data bit 2
14 DB3 H/L Data bit 3
15 DB4 H/L Data bit 4
16 DB5 H/L Data bit 5
17 DB6 H/L Data bit 6
18 DB7 H/L Data bit 7
19 FS H/L Pins for selection of font
20 NC NC
- POWER SUPPLY Without Negative Power on PCB With Negative Power on PCB
- Contour Drawing &Block Diagram LED B/L 1.6± 0.1 14.0 65.0± 0.5 54.0 56.8 33.88[A.A.] 127.16[A.A.] 132.2[V.V.] 3- 1.0 2.5 T6963C DB7 FGND VSS VDD /RST FS ** LC C/D /CE /RD /WR DB0 0.53 0.53 0.49 S6B2086S6B2086 S6B2086 OR EQUIVALENT* 0.49 4-R1.75 LC SRAM 8080 S6B2086 240 x 64 DOTS LCD PANEL 20- 1.0 4.25 2.54 P2.54X9=22.86 LC 1.6± 0.1 180.0± 0.5 176.0 154.8 5.5 4.1 2.0 11.6 LC NO B/L 10.9± 0.56.9± 0.5 16.0[MAX.]11.0[MAX.] 132.2[V.V.] 154.8 176.0 180.0± 0.5 11.6 2.0 16.0[MAX.] 4-R1.75 127.16[A.A.] 2.5 3- 1.0 CL 33.88[A.A.] 39.2[V.V.] 56.8 54.0 65.0± 0.5 10.0 5.08 4.1 5.5 CL CL 1.6± 0.1 CL 14.0P2.54X9=22.86 2.54 4.25 10.9± 0.5 20- 1.0 WHITE LED B/L
10.Timing Characteristics
- Table of T6963C Commands
12.Quality Assurance Screen Cosmetic Criteria Item Defect Judgment Criterion Partition
1 Spots
A)Clear S i z e : d m m Acceptable Qty in active area d ≤0 . 1 D i s r e g a r d 0 . 1 < d ≤0 . 2 6 0 . 2 < d ≤0 . 3 2 0 . 3 < d 0 Note: Including pin holes and defective dots which must be within one pixel size. B)Unclear S i z e : d m m Acceptable Qty in active area d ≤0 . 2 D i s r e g a r d 0 . 2 < d ≤0 . 5 6 0 . 5 < d ≤0 . 7 2 0 . 7 < d 0 Minor
2 Bubbles in Polarizer
S i z e : d m m Acceptable Qty in active area d ≤0 . 3 D i s r e g a r d 0 . 3 < d≤1 . 0 3 1 . 0 < d≤1 . 5 1 1 . 5 < d 0 Minor
3 Scratch
In accordance with spots cosmetic criteria. When the light reflects on the panel surface, the scratches are not to be remarkable. Minor
4 Allowable Density Above defects should be separated more than 30mm each
other. Minor
5 Coloration
Not to be noticeable coloration in the viewing area of the LCD panels. Back-light type should be judged with back-light on state only. Minor
13.Reliability Content of Reliability Test Environmental Test Test Item Content of Test Test Condition Applicable Standard High Temperature storage Endurance test applying the high storage temperature for a long time. 60°C 96hrs —— Low Temperature storage Endurance test applying the high storage temperature for a long time. -10°C 96hrs —— High Temperature Operation Endurance test applying the electric stress (V oltage & Current) and the thermal stress to the element for a long time. 50°C 96hrs —— Low Temperature Operation Endurance test applying the electric stress under low temperature for a long time. 0°C 96hrs —— High Temperature/ Humidity Storage Endurance test applying the high temperature and high humidity storage for a long time. 60°C,90%RH 96hrs —— High Temperature/ Humidity Operation Endurance test applying the electric stress (V oltage & Current) and temperature / humidity stress to the element for a long time. 50°C,90%RH 96hrs —— Temperature Cycle Endurance test applying the low and high temperature cycle. - 1 0 ° C 2 5 ° C 6 0 ° C 3 0 m i n 5 m i n 3 0 m i n 1 c y c l e -10°C/60°C 10 cycles —— Mechanical Test Vibration test Endurance test applying the vibration during transportation and using. 10~22Hz→1.5mmp-p 22~500Hz→1.5G Total 0.5hrs Shock test Constructional and mechanical endurance test applying the shock during transportation. 50G Half sign wave 11 msec 3 times of each direction ***Supply voltage for logic system=5V . Supply voltage for LCD system =Operating voltage at 25°C