PC10-270

PC10 MAXWELL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Page 1 Document number: 1003996.14 maxwell.com DATASHEET PC SERIES ULTRACAPACITORS FEATURES AND BENEFITS Up to 500,000 duty cycles with 10 year life capability Hermetically sealed, stainless steel construction Low profile prismatic design Higher energy vs electrolytic capacitors Higher power vs batteries TYPICAL APPLICATIONS Automotive subsystems Smart Meter Back up power for SSD and NV-DIMM Consumer electronics PRODUCT SPECIFICATIONS ELECTRICAL PC10, PC10-90, PC10-270 PC10HT, PC10HT-90, PC10HT-270 Rated Capacitance 1 10 F 10 F Minimum Capacitance, Initial 1 9 F 9 F Maximum Capacitance, Initial 1 12 F 12 F Maximum ESR DC, initial 1 180 mΩ 180 mΩ Test Current for Capacitance and ESR DC 1 1 A 1 A Rated Voltage 2.50 V 2.20 V Absolute Maximum Voltage 3 2.70 V 2.70 V Absolute Maximum Current 2.80 A 2.40 A Leakage Current at 25°C, maximum 4 0.040 mA 0.040 mA TEMPERATURE Operating temperature range (Cell case temperature) Minimum -40oC -40oC Maximum 70oC 85oC Storage temperature range (Stored uncharged) Minimum -40oC -40oC Maximum 85oC 85oC

Page 2 Document number: 1003996.14 maxwell.com DATASHEET PC SERIES ULTRACAPACITORS PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL Mass, typical 6.3 g 6.3 g Terminals Wire Leads Wire Leads Vibration Specification ISO16750, Table 14 ISO16750, Table 14 Shock Specification - - POWER AND ENERGY PC10, PC10-90, PC10-270 PC10HT, PC10HT-90, PC10HT-270 Usable Specific Power, P d 5 660 W/kg 510 W/kg Impedance Match Specific Power, P max 6 1,400 W/kg 1,100 W/kg Specific Energy, E max 1.4 Wh/kg 1.1 Wh/kg Stored Energy 8, 11 0.009 Wh 0.007 Wh SAFETY Short Circuit Current, typical (Current possible with short circuit from rated voltage. Do not use as an operating current.)

14 A 12 A

Certifications UL810a, RoHS UL810a, RoHS

Page 3 Document number: 1003996.14 maxwell.com DATASHEET PC SERIES ULTRACAPACITORS TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS PC10, PC10-90, PC10-270 PC10HT, PC10HT-90, PC10HT-270 Thermal Resistance (Rth, Case to Ambient), typical2 15oC/W 15oC/W Thermal Capacitance (C th), typical 2 3.6 J/oC 3.6 J/oC Maximum Continuous Current (∆T = 15 °C) 2 2.4 ARMS 2.4 ARMS Maximum Continuous Current (∆T = 40 °C) 2 3.8 ARMS 3.8 ARMS LIFE DC Life at High Temperature 1 (held continuously at Rated Voltage and Maximum Operating Temperature) 3,000 hours 1,000 hours Capacitance Change (% decrease from minimum initial value) 20% 20% ESR Change (% increase from maximum initial value) 100% 100% Projected DC Life at 25°C 1 10 years 10 years Capacitance Change (% decrease from minimum initial value) 20% 20% ESR Change (% increase from maximum initial value) 100% 100% Cycle Life 1,9 500,000 cycles 500,000 cycles Capacitance Change (% decrease from minimum initial value) 20% 20% ESR Change (% increase from maximum initial value) 100% 100% Test Current 1.0 A 1.0 A Shelf Life (Stored uncharged at 25°C) 4 years 4 years PC-10 HT Temperature Response Plot 80% 90% 100% 110% 120% 130% 140% -20 -10 0 10 20 30 40 50 60 70 80 90 Temperature (°C) Percentage Change from Value at 20°C Cap DC ESR ESR AND CAPACITANCE VS TEMPERATURE

Page 4 Document number: 1003996.14 maxwell.com DATASHEET PC SERIES ULTRACAPACITORS NOTES 1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. ∆T=IRMS 2 x ESR x Rth 3. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 4. After 72 hours (208 hours - BCAP3400) at rated voltage. Initial leakage current can be higher. 5. Per IEC 62391-2, Pd = 6. Pmax = 7. Emax = 0.12V2 ESRDC x mass 4 x ESRDC x mass ½ CV2 3,600 x mass 8. Estored = 9. Cycle using specified test current per waveform below. 10. Cycle life varies depending upon application-specific characteristics. Actual results will vary. 11. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials) under transportation regulations. ½ CV2 3,600 MOUNTING RECOMMENDATIONS Do not reverse polarity. Please refer to document number 1008238, available at maxwell.com for soldering recommendations. MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, and positive terminal.

Page 5 Document number: 1003996.14 maxwell.com DATASHEET PC SERIES ULTRACAPACITORS Part Description Dimensions (mm) Package QuantityL (mm) W (mm) T (mm) d (mm) p (mm) PC10, PC10HT PC10-90, PC10HT-90 PC10-270, PC10HT-270 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts: 6585152, 6643119, 6842330, 7116545, 7295423, 7342770, 7352558, 7384433, 7407520, 7492571, 7508651, 7791860, 7791861, 7883553, 7935155, 8072734, 8279580, and patents pending. 3.1 ± .5 p ± .5 T ± 0.2 W ± 0.3 d 0.5 8 MIN L 0.5 L 3.5 MAX BODY+SHRINK (-) NEGATIVE TERMINAL (+) POSITIVE TERMINAL MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP , C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission from Maxwell Technologies, Inc. All contents copyright © 2013 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. maxwell.com Maxwell Technologies, Inc. Global Headquarters

3888 Calle Fortunada

San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA Route de Montena 65 CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Leopoldstrasse 244

80807 München

Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99 Maxwell Technologies Shanghai Trading Co. Ltd. Unit A2BC, 12th Floor

500 Zhangyang Road, Pudong

Shanghai 200122, P .R. China Tel: +86 21 3852 4000 Fax: +86 21 3852 4099