PBV ISABELLENHUETTE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Applications

istance values Ohm 0.0005 to 1 tole rance % 0.5 / 1 / 5 te mperature coefficient (20-60 °C) ppm/K <30 for values ≥R010 <75 for values <r0 Applicable temperature range °C -55 to +125 Power rating W 3 / 10 (on a heatsink) Thermal resistance to ambient (Rth) K/W <15 Thermal resistance to aluminium substrat (Rthi) K/W <3 <6 for parts < r0 Dielectric withstanding voltage V AC 500 Inductance nH <10 Stability (Nominal load) deviation, tK = ter minal temperature < 0 .5 % a fter 2000 h (T K = 7 0 ° C) Ordering code PBV - 01 - F1 - 1.0 tole rance t erminal re sistance value [oh m] / „r“ r epresents decimal point ty pe A ll data sheet.com

ISA-PLAN® // PrecISIoN r eSISt orS PBV Recommended solder profile Reflow- and IR-soldering temperature °C 260 255 217 time sec peak 40 90 Packaging information Specification DIN e N 60286-3 Parts per tube pcs 25 Assembly instruction Max. allowed torque for screws M3 1 Nm Resistance values Tolerance 0.5 % Tolerance 1 % Tolerance 5 % r 0005   r 0015  r 001    r 002   r 0022   r 003   r 0033   r 0047  r 005   r 0068   r 010   r 015   r 020   r 022   r 025   r 033   r 047  r 050   r 068   r 100   r 150   r 200  r 220  r 500  r 00  Available standard resistance values and tolerances* * Further values and tolerances on request = available A ll data sheet.com

ISA-PLAN® // PrecISIoN r eSISt orS PBV Mechanical dimensions [mm] and marking Temperature dependence of the electrical resistance Power derating curve heatsink mounted R ≥2 mOhm; P = 10 W without heatsink (P = 3 W) heatsink mounted R <2 mOhm; P = 10 W te rminal temperature tK [°C] P/PNomdr/r2 0 [%] -1,00 -0,75 -0,50 -0,25 0,00 0,25 0,50 0,75 1,00 -55 -30 -5 20 45 70 95 120 145 170 TCR = 0 ppm/K TCR = -30 ppm/K TCR = +30 ppm/K 0,25 0,5 0,75 1,25 0 20 40 60 80 100 120 140 160 180 Temperature [°C] A ll data sheet.com

ISA-PLAN® // PrecISIoN r eSISt orS PBV Disclaimer // All products, product specifications and data are subject to change without notice. The product specifications do not expand or otherwise modify Isabellenhütte’s terms and conditions of sale, including but not limited to, the warranty expressed therein. Isabellenhütte makes no warranty, representation or guarantee other than as set forth in its terms and conditions of sale. Information provided in datasheets and/or specifications may vary from actual results in different applications. Any statements made by Isabellenhütte regarding the suitability of products for certain types of applications are based on its knowledge of typical requirements that are often placed on its products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in the application intended. No license, express or implied, or otherwise, to any intellectual property rights is granted by this document. Any and all liability arising out of the application or use of any product shall be as set forth in Isabellenhütte’s terms and conditions of sale. Specification Parameters Test Conditions Specification Maximum Temperature for full power operation ( R > 2 mOhm ) 70/90 °C 65/95 °C Working Temperature -55 to 125 °C -55 to 125 °C Solderability MIL-S t D-202 method 208 > 95 % coverage r esistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d no damage Low temperature Storage and o peration MIL-S t D-26 e 0.1 % Life MIL-S t D-26 e 0.2 % High temperature e xposure 125 °C, 2000 h 0.2 % r esistance temperature c haracteristic MIL-STD-202 method 304 (20-60°C) < 30 ppm/K t hermal e MF 0 - 100 °C 2 µV/K max. Frequency c haracteristic inductivity < 10 nH 0,0001 0,001 0,01 0,1 100 0,01 0,1 100 1000 10000 0,000001 0,00001 0,0001 0,001 0,01 0,1 1 10 100 Maximum pulse energy respectively pulse power for permanent operation 10000 1000 Pulse energy [J] Pulse width [sec] Power [W] this curve is only valid for the resistance value r0005. the progression of the curve in the lower range could be different for other resistance values. t herefore a separate qualification should be made in thresholds. A ll data sheet.com