PBM200PS3V3-C XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

200 Watts

  • Worldwide Medical Approvals
  • Single, Dual, Triple and Quad Outputs
  • Small Size - Only 7” x 4” x 1.5”
  • Power Fail Detect & Remote On/Off
  • Universal AC Input with Active PFC
  • High Reliability - 350k Hours MTBF
  • 100 Watt Convection-Cooled Rating PBM200 Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • 3.2 A rms at 115 VAC,

1.6 A rms at 230 VAC

Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC cold start 25 ºC Power Factor • 0.98 typical Earth Leakage Current • 90 µA max at 115 VAC, 60 Hz 150 µA max at 230 VAC, 50 Hz Input Protection • Both line and neutral fused Output Output Voltage • See table Output Voltage Trim • Not user-adjustable Initial Set Accuracy •± 2 % Minimum Load • See table & note 5 Start Up Delay • 2 s max Start Up Rise Time • 18 ms typical Hold Up Time • 20 ms minimum at full load & 110 VAC Drift • ±0.2% Line Regulation • ±0.5% max Load Regulation • See note 7 Transient Response • 4% max deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • 2% max pk-pk, 20 MHz BW with a 22 µF electrolytic & a 0.47 µF tantalum capacitor Overvoltage Protection • 112-140% Vnom output 1 only, recycle input to reset Overtemperature • Shutdown at +85 ºC (singles) or +105 ºC Protection (multi outputs) with auto recovery, measured internally Overload Protection • 140-200% typical, auto recovery Short Circuit Protection • Trip and restart (Hiccup mode) Temperature • 0.04%/˚C Coefficient Remote Sense • Single output models only. Compensates for up to 0.5 V drop Remote On/Off • On = Logic low or open circuit Off = Logic high xppower.com General Efficiency • Up to 80% Isolation • 4000 VAC Input to Output

1500 VAC Input to Ground

500 VAC Output to Ground

Switching Frequency • 100 kHz ±12 kHz Power Density • 4.76 W/In Power Fail Detect • AC OK = TTL logic high AC not OK = TTL logic low MTBF • 350 kHrs per MIL-HDBK-217F at +25 ˚C Environmental Operating Temperature • 0 ˚C to +70 ˚C, derate linearly from 100% power at +50 ˚C to 50% power at +70 ˚C Cooling • ‘C’ versions have internal fan, ‘B’ versions are derated with convection cooling or require 25 CFM (see note 4) Operating Humidity • Up to 95% RH, non-condensing Storage Temperature • -40 ˚C to +85 ˚C Operating Altitude • 2500 m Shock • Half sine pulse. acceleration 50 g, 11 ms duration, 3 shocks in each direction, unpackaged, non-operating Vibration • Sinusoidal 10-55 Hz, amplitude 0.15 mm, 30 min/axis, unpackaged, non-operating EMC & Safety Emissions • EN55011 & FCC Class B conducted & radiated Harmonic Currents • EN61000-3-2 Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, level 3 Perf Criteria A Conducted Immunity • EN61000-4-6 3 V, Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, >95% 5000 ms, Perf Criteria A, B, B Safety Approvals • EN60601-1, UL60601-1, CSA22.2 No. 601-1 per cUL, CE Mark

  1. For U-bracket format, replace suffix ‘-C’ with suffix ‘-B’. 2. Output 2 peak current is 12 A on +12 V, 9 A on +15 V, and 6 A on +24 V. Maximum 2 s duration with total load <200 W. 3. Output 4 is floating and can be connected externally for positive or negative output. 4. 200 W for ‘-C’ version with a cover and fan assembly. 100 W for ‘-B’ version with convection cooling (maximum current of output 1 & 2 derated to 50%). 200 W for ‘-B’ version with 25 CFM forced air provided by user. 5. Zero minimum load for outputs 2, 3 & 4. All models may be operated at no- load on output 1, but voltage total regulation increases to 10%. 6. When the Remote Sense facility is not used, +Sense must be connected to +V, and –Sense to return, on P2 connector. 7. Total regulation includes initial tolerance, line regulation and load regulation. 8. Peak current for single output models is 140% of Imax. Maximum 2 s duration with 10% duty cycle. 9. † Available from Farnell. See pages 204-206. Mechanical Details 7.00 (177.8) 1.00 (25.4) 3.00 (76.2) 0.50 0.50 (12.7) 0.85 (21.6) A L N G A A A A A A A 4.00 (101.6) 1.50 (38.1) 1.00 (25.4) A: Mounting holes. Threaded inserts for M3 0.5 screws (8 places) B B B: Mounting holes. Threaded inserts for 6.32" screws (8 places) B B B B B B 0.65 (16.5) 2.30 (58.4) 1 Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 [0.5] maximum. 3. Input connector P1 is Dinkle DT-35-B01W-03, output connector P2 is Dinkle DT-35-B01W-09 screws are M3, Nickel plated. 4. Connector P3 mates with Molex housing 22-01-1043 & Molex 40445 series crimp terminal. 5. Connectors P4 & P5 mate with Molex housing 22-01-1023 & Molex 40445 series crimp terminal. 6. P4 is for DC fan rated at 24 V/0.2 A (models PBM200PD03 & PD04), 5 V/0.38 A (PBM200PQ06), or 12 V/0.2 A (all other models). Pin 1 Fan+, pin 2 Fan-. 7. P5 is for Remote On/Off. Pin 1 is positive, pin 2 is return. approx. for ‘-C’ version. Conn Pin Model Number(s) PSXX PDXX PTXX (except 04) PT04 PQXX 1 -SENSE OP1 OP1 OP1 OP1

2 Return OP1 OP1 OP1 OP1

3 Return Com Ret Com Ret Com Ret Com Ret

4 Return Com Ret Com Ret Com Ret Com Ret

5 Return Com Ret Com Ret Com Ret Com Ret

6 OP1 OP2 OP2 OP2 OP2

7 OP1 N.C. OP3 N.C. OP3 8 OP1 N.C. N.C. OP4 Ret OP4 Ret 9 +SENSE N.C. N.C. OP4 OP4

1 Fan

2 Com Ret

3 Com Ret

4 PFD PFD PFD PFD PFD

Power(4) Output 1(8) Output 2(2,5) Output 3(5) Output 4(3,5) Model Number(1) Vnom Imin(5) Imax Reg(7) Vnom Imax Reg(7) Vnom Imax Reg(7) Vnom Imax Reg(7) 150 W 3.3 V 3.0 A 46.0 A 3% PBM200PS3V3-C† 175 W 5.1 V 3.0 A 35.0 A 2% PBM200PS05-C† 200 W 12.0 V 1.2 A 16.7 A 2% PBM200PS12-C† 200 W 15.0 V 1.0 A 13.4 A 2% PBM200PS15-C† 200 W 24.0 V 0.6 A 8.4 A 2% PBM200PS24-C† 200 W 30.0 V 0.5 A 6.7 A 2% PBM200PS30-C 200 W 48.0 V 0.5 A 4.2 A 2% PBM200PS48-C† 200 W +5.1 V 3.0 A 30.0 A 2% +12 V 8.0 A 4% PBM200PD01-C 200 W +5.1 V 3.0 A 30.0 A 2% +15 V 6.0 A 4% PBM200PD02-C 200 W +5.1 V 3.0 A 30.0 A 2% +24 V 4.0 A 4% PBM200PD03-C 200 W +12.0 V 1.0 A 8.7 A 2% +24 V 4.0 A 4% PBM200PD04-C