PB1-008-6 PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

• Hand sensitive actuation • Requires no physical pressure to ini- tiate • Reduces risk of repetitive motion inju- ries

Description

This product may cause substantial personal in- jury or property damage if it is not installed and used in accordance with the manufacturer’s in- structions and in accordance with the regulations of the Occupational Safety and Health Administration part 1910.217, the procedures prescrib ed by the American National Standards Institute B11.1 and B11.19, and all other applicable re- gulations, procedures, and codes. The manufacturer shall not be responsible or liable for any injury or damage resulting from use of the product in any such applications or the failure to comply with any such regulation, procedure or code. NOTE 1: If palm button face is not covered, its output relays will not be activated. If palm button face is covered, the sensor defaults to a safe state (output relays are deactivated). (Refers to RFI/EMI noise interference.) Accessories PB-FSBG-1H one hub box PB-PFRG Ring guard PB-CAP Protective cover PB-CPG cover plate and gasket PB-PFUG U-CHANNEL GUARD(GREEN) U-channel guard PB-NUT-GRN Lock nut Technical Data G eneral specifications Description hand sensitive actuation Nominal ratings Operating voltage U B 120 V AC / 45 - 60 Hz Current consumption 40 mA Indicators/operating means Switching state 1 LED Output Number/T ype 2 NO; 2 NC Output type Contact set ; Relay output (contacts are one-way guided) Switching voltage max. 250 V AC Switching current 1 A AC/DC ( resistive load and inductive load ) Switch-on delay t on ≤ 60 ms Switch-off delay t off ≤ 80 ms Mechanical life ≥ 5 x 107 Electrical life ≥ 5 x 106 Electromagnetic compatibility Electrostatic discharge Contact discharging 8 kV Electromagnetic fields Radio frequency immunity IEC61000-4-3 10 V/m , see note 1 Burst IEC 61000-4-4 4 kV Surge IEC 61000-4-5 symmetrical: 1000 V asymmetrical: 2000 V Conducted noise immunity IEC 61000-4-6 10 V rms , see note 1 Ambient conditions Shock resistance 45 g for 2 ms Mechanical specifications Connection type screw terminals Degree of protection IP64 Material Palm Button : Noryl N190 Protective cover Noryl N190 Note Palm Button Approvals and certificates UL approval UL 991 CSA approval CSA C22.2, No. 14 Dimensions ø 60 ø 43 4020 ø 60 ø 56 LED

Germany: +49 621 776 4411Pepperl+Fuchs Group Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. USA: +1 330 486 0001 Singapore: +65 6779 9091 Palm Button PB1-008-6 Release date: 2014-11-25 22:18 Date of issue: 2014-11-25 093685_eng.xml IMPORTANT Before installing, refer to ANSI B11.1, B11.19 and OSHA 1910.217. Should the switch be used in a two-hand control application, each hand control s hall be protected against unintended operation and arranged by design, construction, and/or separation so that the concurrent use of both hands is required to trip the press. The control system shall be designed to perm it an adjustment which will require concurrent pressure from both hands during the die closing portion of the stroke. The control system shall incorporate an antirepeat feature. The control systems shall be designed to require release of all operator’s hand controls before an interrupted stroke can be resumed. Should the switch be used in a two-hand tr ip application, a two-hand trip shall have the individual operator’s hand controls protected against unintentional operation and have the individual operator’s hand controls arranged by design and co nstruction and/or separation to require the use of both hands to trip the press and use a control arrangement requiring concurrent operation of the individual operator’s hand controls. Two-hand trip systems on full revolution clutch machines shall incorporat e an antirepeat feature. Rings or shrouds are commonly used to protect palm-actuated butt ons from unintentional actuation. Precautions in design or installation are needed to prevent actuation of two buttons by the use of one hand and the elbow of the same arm and to inhibit other circumvention of the two-hand requirement. The device shall be located at a distance fr om the nearest hazard such that the operator cannot reach the hazard with a hand or other body part before cessation of motion of the hazardous portion of the machine cycle. Descriptions of formulas for distances, between the switches and from the nearest hazard, can be found in American National Standards Institute (ANSI) B11.1 and B11.19. Since each two-hand control or trip applicatio n is different, the user needs to make sure that all Occupational Safety and Heal th Administration (OSHA) and Amer ican National Standards Institute (ANSI) requirements are followed. This device shall be installed so that the distance between the terminal connections of the palm button switch and a dead metal part (including the enclosure) is a minimum of 1/4” (6.35 mm). Electrical Connection 5 L1 6 L2