PA10A WILCOXON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Note: Due to continuous process improvement, specifications are subject to change without notice. Wilcoxon Sensing Technologies 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com An Amphenol Company buy.wilcoxon.com www.wilcoxon.com 99431 Rev.A 03/22 SPECIFICATIONS PA10A Shaker system power amplifier Key features
- Silent operation for a noise-free test environment
- Supplies 400 W output power at 4 Ω load impedance
- Flat frequency response to 40 kHz
- Lightweight—just 8.5 lb (3.8 kg)
- Front panel adjustable gain up to 26 dB Output Maximum power output, rated at 4Ω load 400 watts Frequency response, –3 dB 0.4 Hz to 40 kHz Distortion1 < 0.1% Current limit 18A peak Front panel Two row, four function keys LCD Protection Interlock Switch DC Fault Detection Clip Detection Over-Current / Over-Tempera- ture Detection Safe Start in Mute Mode Input impedance 10 kΩ Output impedance 30 kΩ Input connector BNC jack Output connector Screw terminals Maximum output 38 V RMS Maximum signal gain, adjustable 26 dB Size (H x W x D) 3.5 x 17.3 x 14.6 in (9 x 44 x 37 cm) Weight 8.5lb (3.8 kg) Power requirements 100-120 VAC or 220-240 VAC Dimensions in inches (cm) Accessories supplied: Power cable, rack mounting brackets, rubber feet, spare fuses Notes: 1 THD 0.1% at 4 Ω impedence, 1 kHz max output voltage. THD 0.04% at 4 Ω impedence, 1 kHz full output power.