P8TG-1212E2:1MLF

P8TG-123R3E21MLF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PM6-Series – P8TG-xxxxE/Z2:1(H35)MLF – Single and D ual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P8TG-xxxxE/Z2:1(H35)MLF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation ± 0.5% / ± 1.5% (only 3.3 / ±3.3 Vout Models) Ripple and Noise (20Mhz bandwidth) 60 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC (3500 VDC optional)* I/O Isolation Capacity 470 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 266 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 17g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM6 series P8 TG -xxxxE/Z2:1(H30) M LF is a family of cost effective 1.5W single & dual output DC-DC converters with a w ide input Voltage of 2:1. These converters are encapsulated in an ultra miniature DIP24 plastic or metal case. High performance features: 1500VDC u p to 3500VDC input/output isolation, high efficiency operation, output voltage accuracy of ±1% maximum, wide input range 2:1 and low output ri pple and noise. PM6-SERIES /checkbld 1.5 Watt /checkbld 2:1 Wide Input /checkbld Regulated /checkbld DIP24 Metal Case /checkbld 1.5 or 3.5 KV DC I/O Isolation /checkbld SINGLE and DUAL Output /checkbld Continuous Short Circuit Prot. Rev.09-2009

PM6-Series – P8TG-xxxxE/Z2:1(H35)MLF – Single and D ual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P8TG-123R3E2:1MLF 9-18 25 173 3.3 0 454 72 470 P8TG-1205E2:1MLF 9-18 25 169 5 0 300 74 470 P8TG-1209E2:1MLF 9-18 25 167 9 0 167 75 68 P8TG-1212E2:1MLF 9-18 25 167 12 0 125 75 47 P8TG-1215E2:1MLF 9-18 25 167 15 0 100 75 22 P8TG-1224E2:1MLF 9-18 25 167 24 0 63 75 10 P8TG-243R3E2:1MLF 18-36 12 86 3.3 0 454 72 470 P8TG-2405E2:1MLF 18-36 12 84 5 0 300 74 470 P8TG-2409E2:1MLF 18-36 12 83 9 0 167 75 68 P8TG-2412E2:1MLF 18-36 12 83 12 0 125 75 47 P8TG-2415E2:1MLF 18-36 12 83 15 0 100 75 22 P8TG-2424E2:1MLF 18-36 12 83 24 0 63 75 10 P8TG-483R3E2:1MLF 36-72 8 43 3.3 0 454 72 470 P8TG-4805E2:1MLF 36-72 8 42 5 0 300 74 470 P8TG-4809E2:1MLF 36-72 8 42 9 0 167 74 68 P8TG-4812E2:1MLF 36-72 8 42 12 0 125 74 47 P8TG-4815E2:1MLF 36-72 8 42 15 0 100 74 22 P8TG-4824E2:1MLF 36-72 8 42 24 0 63 74 10 DUAL OUTPUT P8TG-123R3Z2:1MLF 9-18 25 173 ± 3.3 0 ± 227 72 ± 220 P8TG-1205Z2:1MLF 9-18 25 169 ± 5 0 ± 150 74 ± 220 P8TG-1209Z2:1MLF 9-18 25 167 ± 9 0 ± 84 75 ± 33 P8TG-1212Z2:1MLF 9-18 25 167 ± 12 0 ± 63 75 ± 22 P8TG-1215Z2:1MLF 9-18 25 167 ± 15 0 ± 50 75 ± 10 P8TG-1224Z2:1MLF 9-18 25 167 ± 24 0 ± 32 75 ± 10 P8TG-243R3Z2:1MLF 18-36 12 86 ± 3.3 0 ± 227 72 ± 220 P8TG-2405Z2:1MLF 18-36 12 84 ± 5 0 ± 150 74 ± 220 P8TG-2409Z2:1MLF 18-36 12 83 ± 9 0 ± 84 75 ± 33 P8TG-2412Z2:1MLF 18-36 12 83 ± 12 0 ± 63 75 ± 22 P8TG-2415Z2:1MLF 18-36 12 83 ± 15 0 ± 50 75 ± 10 P8TG-2424Z2:1MLF 18-36 12 83 ± 24 0 ± 32 75 ± 10 P8TG-483R3Z2:1MLF 36-72 8 43 ± 3.3 0 ± 227 72 ± 220 P8TG-4805Z2:1MLF 36-72 8 42 ± 5 0 ± 150 74 ± 220 P8TG-4809Z2:1MLF 36-72 8 42 ± 9 0 ± 84 74 ± 33 P8TG-4812Z2:1MLF 36-72 8 42 ± 12 0 ± 63 74 ± 22 P8TG-4815Z2:1MLF 36-72 8 42 ± 15 0 ± 50 74 ± 10 P8TG-4824Z2:1MLF 36-72 8 42 ± 24 0 ± 32 74 ± 10 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “ H35” before MLF! /barb2right Example: P8TG-1205Z2:1H35 MLF for 3.5kV

PM6-Series – P8TG-xxxxE/Z2:1(H35)MLF – Single and D ual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Bottom View 1 12 13 24 27.94 (1.10) 2.54 (0.10) PE AK Modelcode Datecode 31.75 (1.25) 10.16 (0.40) 3.05 (0.12) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Standard Drawing For exact pinning please see connection table! Specification may change without notice. DIP24 – METAL CASE 2.00 (0.08) # SINGLE DUAL SINGLE 3.5KV DUAL 3.5KV 1 +Vin +Vin Omitted Omitted 2 N.C. - Vout - Vin - Vin 3 N.C. Common - Vin - Vin

9 Omitted Omitted Omitted Common

10 - Vout Common Omitted Omitted 11 +Vout +Vout N.C. - Vout 12 - Vin - Vin Omitted Omitted 13 - Vin - Vin Omitted Omitted 14 +Vout +Vout +Vout +Vout 15 - Vout Common Omitted Omitted

16 Omitted Omitted - Vout Common

22 N.C. Common +Vin +Vin 23 N.C. - Vout +Vin +Vin 24 +Vin +Vin Omitted Omitted others PIN CONNECTIONS Omitted App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by nominal Vin and constant resistive load.