P8SG_14 PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
PM5-Series – P8SG-xxxxE/Z(H30)MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P8SG-xxxxE/Z(H30)MLF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation (0% - 100%) ± 0.5% (3.3Vout Models: ± 1.5%) Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC (up to 3000 VDC optional)* I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency (typical) 40 kHz (Single out); 350 kHz (Dual out) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 3.072 Mhrs Physical Specifications Case Material Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 15g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM 5 series P8SG -xxxxE/Z (H30 )M LF is a family of cost effective 1.5 W single and dual output DC/DC converters. These conv erters are encapsulated in an ultra miniature DIP24 metal case . High performance features: 1000VDC, optional up to 3000VDC input/out put isolation, high efficiency operation, output voltage accuracy of ±2 % maximum, input range of ±10% tolerance and low output ripple and noise. PM5-SERIES /checkbld 1.5 Watt /checkbld Regulated /checkbld DIP24 Metal Case /checkbld 1 - 3 kV DC I/O Isolation /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. /checkbld Full SMD Technology Rev.11-2008
PM5-Series – P8SG-xxxxE/Z(H30)MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P8SG-053R3EMLF 5 50 517 3.3 400 51 220 P8SG-0505EMLF 5 50 454 5 300 66 220 P8SG-0509EMLF 5 50 468 9 167 64 220 P8SG-0512EMLF 5 50 441 12 125 68 220 P8SG-0515EMLF 5 50 441 15 100 68 220 P8SG-0524EMLF 5 50 461 24 62 65 220 P8SG-123R3EMLF 12 40 203 3.3 400 54 220 P8SG-1205EMLF 12 40 189 5 300 66 220 P8SG-1209EMLF 12 40 186 9 167 67 220 P8SG-1212EMLF 12 40 178 12 125 70 220 P8SG-1215EMLF 12 40 195 15 100 64 220 P8SG-1224EMLF 12 40 201 24 62 62 220 P8SG-243R3EMLF 24 35 103 3.3 400 53 220 P8SG-2405EMLF 24 35 100 5 300 62 220 P8SG-2409EMLF 24 35 97 9 167 64 220 P8SG-2412EMLF 24 35 93 12 125 67 220 P8SG-2415EMLF 24 35 94 15 100 66 220 P8SG-2424EMLF 24 35 94 24 62 66 220 DUAL OUTPUT P8SG-053R3ZMLF 5 50 440 ± 3.3 ± 200 60 ± 1000 P8SG-0505ZMLF 5 50 461 ± 5 ± 150 65 ± 1000 P8SG-0509ZMLF 5 50 447 ± 9 ± 83 67 ± 470 P8SG-0512ZMLF 5 50 428 ± 12 ± 63 70 ± 470 P8SG-0515ZMLF 5 50 447 ± 15 ± 50 67 ± 470 P8SG-0524ZMLF 5 50 454 ± 24 ± 31 66 ± 220 P8SG-123R3ZMLF 12 35 171 ± 3.3 ± 200 64 ± 1000 P8SG-1205ZMLF 12 35 183 ± 5 ± 150 68 ± 1000 P8SG-1209ZMLF 12 35 178 ± 9 ± 83 70 ± 470 P8SG-1212ZMLF 12 35 166 ± 12 ± 63 75 ± 470 P8SG-1215ZMLF 12 35 173 ± 15 ± 50 72 ± 470 P8SG-1224ZMLF 12 35 176 ± 24 ± 31 71 ± 220 P8SG-243R3ZMLF 24 15 83 ± 3.3 ± 200 66 ± 1000 P8SG-2405ZMLF 24 15 89 ± 5 ± 150 70 ± 1000 P8SG-2409ZMLF 24 15 85 ± 9 ± 83 73 ± 470 P8SG-2412ZMLF 24 15 80 ± 12 ± 63 78 ± 470 P8SG-2415ZMLF 24 15 83 ± 15 ± 50 75 ± 470 P8SG-2424ZMLF 24 15 84 ± 24 ± 31 74 ± 220 If you need other specifications, please enquire. * For optional 3kV DC I/O Isolation, please add “H3 0” before MLF! /barb2right Example: P8SG-1205ZH30MLF for 3kV
PM5-Series – P8SG-xxxxE/Z(H30)MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Bottom View 1 12 13 24 27.94 (1.10) 15.24 (0.60) 2.54 (0.10) PE AK Modelcode Datecode 20.30 (0.80) 31.80 (1.25) 10.20 (0.40) 3.05 (0.12) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Standard Drawing For exact pinning please see connection table! Specification may change without notice. DIP24 – METAL CASE 2.00 (0.08) # SINGLE DUAL SINGLE 3KV DUAL 3KV 1 +Vin +Vin +Vin +Vin 2 N.C. - Vout +Vin +Vin 3 N.C. Common Omitted Omitted 10 - Vout Common Omitted Common 11 +Vout +Vout Omitted Common 12 - Vin - Vin - Vout Omitted 13 - Vin - Vin +Vout - Vout 14 +Vout +Vout Omitted Omitted 15 - Vout Common Omitted + Vout 22 N.C. Common Omitted Omitted 23 N.C. - Vout - Vin - Vin 24 +Vin +Vin - Vin - Vin PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load.