P8IU_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PMA-Series – P8IU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P8IU-xxxxELF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitors Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (20% - 100%) ± 10% (3.3Vout Models: ± 20%) Ripple and Noise (20Mhz bandwidth) 100 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 3000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency 80 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 1.5g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM A series P8 IU -xxxxELF is a family of cost effective 1.5 W single output DC/DC converters. These converters are in an ultra miniature SIP4 case. Devices are encapsulated. High performance fe atures: 3000VDC input/output isolation, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% tolerance and low output ripple and noise. PMA-SERIES /checkbld 1.5 Watt /checkbld Unregulated /checkbld Single Output /checkbld SIP4 Case /checkbld 3 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.11-2008

PMA-Series – P8IU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P8IU-053R3ELF 5 30 361 3.3 400 73 220 P8IU-0505ELF 5 30 400 5 300 75 220 P8IU-057R2ELF 5 30 400 7.2 208 75 220 P8IU-0509ELF 5 30 400 9 167 75 220 P8IU-0512ELF 5 30 384 12 125 78 220 P8IU-0515ELF 5 30 384 15 100 78 220 P8IU-0518ELF 5 30 384 18 83 78 220 P8IU-0524ELF 5 30 379 24 62.5 79 220 P8IU-123R3ELF 12 15 148 3.3 400 74 220 P8IU-1205ELF 12 15 168 5 300 74 220 P8IU-127R2ELF 12 15 166 7.2 208 75 220 P8IU-1209ELF 12 15 166 9 167 75 220 P8IU-1212ELF 12 15 166 12 125 75 220 P8IU-1215ELF 12 15 162 15 100 77 220 P8IU-1218ELF 12 15 162 18 83 77 220 P8IU-1224ELF 12 15 162 24 62.5 77 220 P8IU-243R3ELF 24 10 73 3.3 400 75 220 P8IU-2405ELF 24 10 83 5 300 75 220 P8IU-247R2ELF 24 10 83 7.2 208 75 220 P8IU-2409ELF 24 10 83 9 167 75 220 P8IU-2412ELF 24 10 82 12 125 76 220 P8IU-2415ELF 24 10 82 15 100 76 220 P8IU-2418ELF 24 10 82 18 83 76 220 P8IU-2424ELF 24 10 79 24 62.5 79 220 P8IU-483R3ELF 48 6 36 3.3 400 75 220 P8IU-4805ELF 48 6 41 5 300 76 220 P8IU-487R2ELF 48 6 41 7.2 208 76 220 P8IU-4809ELF 48 6 41 9 167 76 220 P8IU-4812ELF 48 6 40 12 125 77 220 P8IU-4815ELF 48 6 40 15 100 77 220 P8IU-4818ELF 48 6 40 18 83 77 220 P8IU-4824ELF 48 6 40 24 62.5 78 220 If you need other specifications, please enquire.

PMA-Series – P8IU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Modelcode Datecode 1 2 3 4 11.68 (0.46) 9.65 (0.38) 3.05 (0.12) 2.54 (0.10) Bottom View 1 2 3 4 1.25 (0.05) 0.50 (0.02) 6.00* (0.24)* 0.50 (0.02) 0.50 (0.02) 0.50 (0.02) 0.25 (0.01) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. * The thickness of 48Vin voltage is 7.50 (0.29) PE AK SIP4 – PLASTIC CASE # SINGLE 1 - Vin 2 +Vin 3 - Vout 4 +Vout PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.