P752 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
The Connor Winfield P752 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±100ppm, -40 to 85°C overall stability, LVPECL Differential Outputs and Tri-state Enable / Disable function. The P752 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. P752 - 312.5MHz CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE LOW JITTER <2pS RMS OVERALL FREQUENCY TOLERANCE ±100ppm TEMPERATURE RANGE: -40 to 85°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT CERAMIC SURFACE MOUNT 3.3V LVPECL 5x7.0mm HIGH FREQUENCY CLOCK OSCILLATOR P752 CW P752 312.5M 0631 CRYSTAL CONTROLLED OSCILLATORS THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T CRYSTAL CONTROLLED OSCILLATORS Ec242 07/31/06 Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 125 Supply Voltage (Vcc) -0.5 4.6 Vdc Input Voltage (Vcc) -0.5 Vcc+0.5 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 250 800 MHz Total Frequency Tolerance -100 100 ppm Operating Temperature Range -40 Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) 100 mA Jitter (BW=10Hz to 20MHz) pS RMS Jitter (BW=12kHz to 20MHz) pS RMS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Disable Input Voltage (Low) (Vil) 1.68 Vdc Enable Input Voltage (High) (Vih) 2.275 Vdc LVPECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD Ohms Voltage (High) (Voh) 2.275 Vdc (Low) (Vol) 1.68 Vdc Duty Cycle Rise / Fall Time 20% to 80% 0.5 nS Notes Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. Duty Cycle measured at 50% of output swing. PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed ceramic package and metal cover.
.070 (1.8mm) CW P752 312.5M 0631 MAX MAX MAX TEST CIRCUIT SUGGESTED PAD LAYOUT PACKAGE LAYOUT 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C SOLDER PROFILE OUTPUT WAVEFORM N/C E/D Vcc1 = Vcc2 = 3.3Vdc THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS TABLE 6.0 Pin Connection Enable / Disable N/C Ground Q Output Q Output Vcc TABLE 7.0 Enable / Disable Function (Pad 1) Output High or Open Enable Low Disable (High Impedance) PIN CONNECTIONS