P731 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS The Connor-Winfield P731 is a 3.3V Crystal Oscillator (XO) with LVPECL Differential outputs and enable/disable function. The P731 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. P731 - 704.38058 MHz LVPECL CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
3.3V OPERATION LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: +/-50 PPM TEMPERATURE RANGE: 0 to 85°C DIFFERENTIAL LVPECL OUTPUTS ENABLE / DISABLE FUNCTION SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE 3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY LVPECL CLOCK OSCILLATOR P731 Ec236 07/07/06 CW P731 704.38058M 0628 ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -40 Supply Voltage (Vcc) -0.5 4.6 Vdc Input Voltage (Vcc) -0.5 4.6 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 250 800 MHz Total Frequency Tolerance -50 ppm Operating Temperature Range Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) 100 mA Jitter (BW=10Hz to 20MHz) pS RMS Jitter (BW=12kHz to 20MHz) pS RMS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Disable Input Voltage (Low) (Vil) 1.68 Vdc Enable Input Voltage (High) (Vih) 2.275 Vdc PECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD Ohms Voltage (High) (Voh) 2.275 Vdc (Low) (Vol) 1.68 Vdc Duty Cycle Rise / Fall Time 20% to 80% 0.5 nS PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed ceramic package and metal cover. TABLE 6.0 Pin Connection Enable / Disable N/C Ground Q Output Q Output Vcc TABLE 7.0 Enable / Disable Function (Pad 1) Output High or Open Enable Low Disable (High Impedance) Notes Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. Duty Cycle measured at 50% of output swing.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS Ec236 07/07/06 N/C E/D .070 (1.8mm) CW P731 704.38058M 0628 MAX MAX MAX TEST CIRCUIT SUGGESTED PAD LAYOUT PACKAGE LAYOUT 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C SOLDER PROFILE OUTPUT WAVEFORM Vcc1 = Vcc2 = 3.3Vdc