P701 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2007 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS The Connor Winfield P701 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm, 0 to 70°C overall stability, LVPECL Differential Outputs and Tri-state Enable / Disable function. The P701 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. 1 2 P701 - 312.5M LVPECL CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
3.3V OPERATION LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: +/-50 PPM TEMPERATURE RANGE: 0 to 70°C DIFFERENTIAL LVPECL OUTPUTS ENABLE / DISABLE FUNCTION SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE 3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY LVPECL CLOCK OSCILLATOR P701 Ec215 03 10/11/07 CW 0723 P701
312.5 MHZ
TABLE 6.0 Pin Connection
1 Enable / Disable
2 N/C
3 Ground
4 Q Output
5 Q Output
6 Vcc
TABLE 7.0 Enable / Disable Function (Pad 1) Output High or Open Enable Low Disable (High Impedance) ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -40 - 85 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.5 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 250 - 800 MHz Total Frequency Tolerance -50 50 ppm 1 Operating Temperature Range 0 - 70 °C Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) - 60 100 mA Jitter (BW=10Hz to 20MHz) - - 8 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Disable Input Voltage (Low) (Vil) - - 1.68 Vdc 2 Enable Input Voltage (High) (Vih) 2.275 - - Vdc 2 LVPECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - - 50 Ohms 3 Voltage (High) (Voh) 2.275 - - Vdc (Low) (Vol) - - 1.68 Vdc Duty Cycle 45 50 55 % 4 Rise / Fall Time 20% to 80% - - 0.5 ns 5 Rise / Fall Time 20% to 80% - - 0.4 ns 6 PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed ceramic package and metal cover. Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. 5) Rise and fall times measured 20% to 80% of the total output voltage swing. 6) Rise and fall times measured 20% to 80% of the LVPECL levels 1.68V to 2.275V.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2007 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS 2 2Ec215 03 10/11/07 N/C E/D .070(1.8mm) CW 0722 P701 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C SOLDER PROFILEOUTPUT WAVEFORM Vcc1 = Vcc2 = 3.3Vdc Q Q 50% 20% 80% tr Duty Cycle tf