P6SMB VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Vishay General Semiconductor Document Number: 88370 Revision: 21-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com , PDD-Asia@vishay.com , PDD-Europe@vishay.com www.vishay.com Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES

 Low profile package  Ideal for automated placement  Glass passivated chip junction  Available in uni-directional and bi-directional  600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 %  Excellent clamping capability  Very fast response time  Low incremental surge resistance  Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C  Solder dip 260 °C, 40 s  Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by in ductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. MECHANICAL DATA Case: DO-214AA (SMB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS co mpliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional devices use CA suffix (e.g. P6SMB10CA). Electrical characteristics apply in both directions. PRIMARY CHARACTERISTICS VBR uni-directional 6.8 V to 540 V VBR bi-directional 6.8 V to 220 V PPPM 600 W PD 5.0 W IFSM (uni-directional only) 100 A TJ max. 150 °C DO-214AA (SMB) Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1) P PPM 600 W Peak pulse current with a 10/1000 µs waveform (1) I PPM See next table A Power dissipation on infinite heatsink TA = 50 °C , P D 5.0 W Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I FSM 100 A Operating junction and storage temperature range T J, TSTG - 65 to + 150 °C

Vishay General Semiconductor www.vishay.com For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com , PDD-Asia@vishay.com , PDD-Europe@vishay.com Document Number: 88370 Revision: 21-Oct-082 Notes: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types with VWM of 10 V and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) VF = 3 V at IF = 50 A (uni-directional only) ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) GENERAL SEMICONDUCTOR PART NUMBER DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (3) (µA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMP. COEFFICIENT OF VBR (%/°C) UNI BI MIN. MAX. P6SMB120A 120A 120C 114 126 1.0 102 1.0 3.6 165 0.107 P6SMB130A 130A 130C 124 137 1.0 111 1.0 3.4 179 0.107 P6SMB150A 150A 150C 143 158 1.0 128 1.0 2.9 207 0.108 P6SMB160A 160A 160C 152 168 1.0 136 1.0 2.7 219 0.108 P6SMB170A 170A 170C 162 179 1.0 145 1.0 2.6 234 0.108 P6SMB180A 180A 180C 171 189 1.0 154 1.0 2.4 246 0.108 P6SMB200A 200A 200C 190 210 1.0 171 1.0 2.2 274 0.108 P6SMB220A 220A 220C 209 231 1.0 185 1.0 1.8 328 0.108 P6SMB250A 250A - 237 263 1.0 214 1.0 1.74 344 0.110 P6SMB300A 300A - 285 315 1.0 256 1.0 1.45 414 0.110 P6SMB350A 350A - 333 368 1.0 300 1.0 1.24 482 0.110 P6SMB400A 400A - 380 420 1.0 342 1.0 1.10 548 0.110 P6SMB440A 440A - 418 462 1.0 376 1.0 1.00 602 0.110 P6SMB480A 480A - 456 504 1.0 408 1.0 0.91 658 0.110 P6SMB510A 510A - 485 535 1.0 434 1.0 0.86 698 0.110 P6SMB540A 540A - 513 567 1.0 459 1.0 0.81 740 0.110

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.