P6NG-0509E21LF

PC6NG_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PMB-Series – P(C)6NG-xxxxE/Z2:1(H30)LF – Single / D ual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P(C)6NG-xxxxE/Z2:1(H30)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (see table) Input Filter Capacitor Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Indefinite (Automatic Recovery) Line Regulation ± 0.5% Load Regulation (25% - 100%) ± 1% Ripple and Noise (20Mhz bandwidth) 80 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications I/O Isolation Voltage (3 sec.) 1000 VDC (3000 VDC optional)* I/O Isolation Capacity 60 pF I/O Isolation Resistance 1000 M Ohm Switching Frequency 100 - 650 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 2.732 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 4.5g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM B 1 Watt series is a family of cost effective 1 W single and dual output DC/DC converters with an optional control Pi n. These converters are encapsulated in an ultra miniature SIP8 or DIP16 pl astic or metal case. High performance features: continuous / long time s hort circuit protection with automatic restart and tight line / load regula tion, high efficiency operation and output voltage accuracy of ±2% maximu m. PMB-SERIES /checkbld 1 Watt /checkbld 2:1 Wide Input /checkbld Reg. Single and Dual Output /checkbld 1 - 3 kV DC I/O Isolation /checkbld SIP8 case /checkbld On/Off Control (optional) /checkbld Contin. Short Circuit Protection Rev.12-2008

PMB-Series – P(C)6NG-xxxxE/Z2:1(H30)LF – Single / D ual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P6NG-053R3E2:1LF 4.5-9 15 298 3.3 76 303 67 3300 P6NG-0505E2:1LF 4.5-9 15 298 5 50 200 67 3300 P6NG-0509E2:1LF 4.5-9 40 285 9 28 111 70 470 P6NG-0512E2:1LF 4.5-9 55 285 12 21 83 70 470 P6NG-0515E2:1LF 4.5-9 55 285 15 17 67 70 470 P6NG-0524E2:1LF 4.5-9 70 294 24 10 42 68 220 P6NG-123R3E2:1LF 9-18 15 119 3.3 76 303 70 3300 P6NG-1205E2:1LF 9-18 15 115 5 50 200 72 3300 P6NG-1209E2:1LF 9-18 15 108 9 28 111 77 470 P6NG-1212E2:1LF 9-18 15 108 12 21 83 77 470 P6NG-1215E2:1LF 9-18 15 108 15 17 67 77 470 P6NG-1224E2:1LF 9-18 15 114 24 10 42 73 220 P6NG-243R3E2:1LF 18-36 8 59 3.3 76 303 70 3300 P6NG-2405E2:1LF 18-36 8 57 5 50 200 72 3300 P6NG-2409E2:1LF 18-36 8 55 9 28 111 75 470 P6NG-2412E2:1LF 18-36 8 55 12 21 83 75 470 P6NG-2415E2:1LF 18-36 8 55 15 17 67 75 470 P6NG-2424E2:1LF 18-36 8 55 24 10 42 75 220 P6NG-483R3E2:1LF 36-72 6 31 3.3 76 303 66 3300 P6NG-4805E2:1LF 36-72 6 30 5 50 200 68 3300 P6NG-4809E2:1LF 36-72 6 29 9 28 111 70 470 P6NG-4812E2:1LF 36-72 6 29 12 21 83 70 470 P6NG-4815E2:1LF 36-72 6 29 15 17 67 70 470 P6NG-4824E2:1LF 36-72 6 30 24 10 42 68 220 If you need other specifications, please enquire. *OPTIONS: Control On/Off For Optional control Pin please add “C” between P and 6 (for example: P C6NG-2424E2:1LF) 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P6NG-2424E2:1 H30LF for 3kV)

PMB-Series – P(C)6NG-xxxxE/Z2:1(H30)LF – Single / D ual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P6NG-053R3Z2:1LF 4.5-9 15 285 ± 3.3 ± 38 ± 152 70 ± 1000 P6NG-0505Z2:1LF 4.5-9 15 270 ± 5.0 ± 25 ± 100 74 ± 1000 P6NG-0509Z2:1LF 4.5-9 20 270 ± 9.0 ± 14 ± 56 74 ± 220 P6NG-0512Z2:1LF 4.5-9 20 266 ± 12.0 ± 10 ± 42 75 ± 220 P6NG-0515Z2:1LF 4.5-9 40 285 ± 15.0 ± 8 ± 33 70 ± 220 P6NG-0524Z2:1LF 4.5-9 70 298 ± 24.0 ± 5 ± 21 67 ± 100 P6NG-123R3Z2:1LF 9-18 15 119 ± 3.3 ± 38 ± 152 70 ± 1000 P6NG-1205Z2:1LF 9-18 15 115 ± 5.0 ± 25 ± 100 72 ± 1000 P6NG-1209Z2:1LF 9-18 15 109 ± 9.0 ± 14 ± 56 76 ± 220 P6NG-1212Z2:1LF 9-18 15 109 ± 12.0 ± 10 ± 42 76 ± 220 P6NG-1215Z2:1LF 9-18 15 112 ± 15.0 ± 8 ± 33 74 ± 220 P6NG-1224Z2:1LF 9-18 40 124 ± 24.0 ± 5 ± 21 67 ± 100 P6NG-243R3Z2:1LF 18-36 8 59 ± 3.3 ± 38 ± 152 70 ± 1000 P6NG-2405Z2:1LF 18-36 8 59 ± 5.0 ± 25 ± 100 70 ± 1000 P6NG-2409Z2:1LF 18-36 8 54 ± 9.0 ± 14 ± 56 76 ± 220 P6NG-2412Z2:1LF 18-36 8 54 ± 12.0 ± 10 ± 42 77 ± 220 P6NG-2415Z2:1LF 18-36 8 55 ± 15.0 ± 8 ± 33 75 ± 220 P6NG-2424Z2:1LF 18-36 20 59 ± 24.0 ± 5 ± 21 70 ± 100 P6NG-483R3Z2:1LF 36-72 6 30 ± 3.3 ± 38 ± 152 70 ± 1000 P6NG-4805Z2:1LF 36-72 6 30 ± 5.0 ± 25 ± 100 70 ± 1000 P6NG-4809Z2:1LF 36-72 6 28 ± 9.0 ± 14 ± 56 74 ± 220 P6NG-4812Z2:1LF 36-72 6 27 ± 12.0 ± 10 ± 42 76 ± 220 P6NG-4815Z2:1LF 36-72 6 29 ± 15.0 ± 8 ± 33 72 ± 220 P6NG-4824Z2:1LF 36-72 12 30 ± 24.0 ± 5 ± 21 70 ± 100 If you need other specifications, please enquire. *OPTIONS: Control On/Off For Optional control Pin please add “C” between P and 6 (for example: P C6NG-2424Z2:1LF) 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P6NG-2424Z2:1 H30LF for 3kV)

PMB-Series – P(C)6NG-xxxxE/Z2:1(H30)LF – Single / D ual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating 3,50 (0.14) 0.25 (0.01) 11.10 (0.44) 0.50 (0.02) 3.05 (0.12) # SINGLE DUAL SINGLE "C" DUAL "C" 1 - Vin - Vin - Vin - Vin 2 +Vin +Vin +Vin +Vin 3 Omitted N.C. Ctrl. Ctrl. 6 +Vout +Vout +Vout +Vout 7 - Vout - Vout - Vout - Vout 8 N.C. Common N.C. Common (Same pinning for 3kv I/O isolation) PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH ² = Tested by nominal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. MCU (Master Control Unit) The MCU Pin Voltage is referenced to –Vin (Pin1) ON: 0 – 0.8 VDC / open / short circuit Pin1 and Pi n3 OFF: 5 VDC OFF idle current: 5mA, typ.