P6MG_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PM4-Series – P6MG-xxxxELF – Single Output – DIP14 – 3KV - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P6MG-xxxxELF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitors Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Short Term Line Regulation ± 0.5% Load Regulation (0% - 100%) ± 0.5% (3.3Vout Models: ± 1.0%) Ripple and Noise (20Mhz bandwidth) 50 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 3000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency 50 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 4.261 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 2.7g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM 4 series P6MG -xxxxELF is a family of cost effective 1 W regulated single output DC/DC converters. These converters ar e in an ultra miniature DIP14 case. Devices are encapsulated. High performa nce features: Regulated Output, 3000VDC input/output isolation, h igh efficiency operation, output voltage accuracy of ±2% maximum, input range of ±10% tolerance and low output ripple and noise. PM4-SERIES /checkbld 1 Watt /checkbld Regulated /checkbld Single Output /checkbld DIP14 Case /checkbld 3 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.11-2008

PM4-Series – P6MG-xxxxELF – Single Output – DIP14 – 3KV - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P6MG-053R3ELF 5 30 350 3.3 333 57 220 P6MG-0505ELF 5 35 317 5 200 63 220 P6MG-057R2ELF 5 45 327 7.2 138.9 61 220 P6MG-0509ELF 5 40 298 9 111.1 67 220 P6MG-0512ELF 5 35 298 12 83.3 67 220 P6MG-0515ELF 5 35 298 15 66.7 67 220 P6MG-123R3ELF 12 20 146 3.3 333 57 220 P6MG-1205ELF 12 20 132 5 200 63 220 P6MG-127R2ELF 12 20 132 7.2 138.9 63 220 P6MG-1209ELF 12 20 128 9 111.1 65 220 P6MG-1212ELF 12 20 122 12 83.3 68 220 P6MG-1215ELF 12 20 126 15 66.7 66 220 P6MG-243R3ELF 24 10 73 3.3 333 57 220 P6MG-2405ELF 24 10 76 5 200 60 220 P6MG-247R2ELF 24 10 76 7.2 138.9 60 220 P6MG-2409ELF 24 10 61 9 111.1 68 220 P6MG-2412ELF 24 10 63 12 83.3 66 220 P6MG-2415ELF 24 10 63 15 66.7 66 220 If you need other specifications, please enquire. Notes:

PM4-Series – P6MG-xxxxELF – Single Output – DIP14 – 3KV - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating 7.62 (0.30) 10.16 (0.40) 0.25 (0.01) # SINGLE (3KV) 1 - Vin 7 N.C. 8 +Vout

9 Omitted

11 Omitted

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.