P6LG-053R3EK PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
PMM4-Series – P6LG-xxxxEK – Single Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P6LG-xxxxEK All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitors Input Reflected Ripple Current¹ 20 mA pk-pk Outpu t Specifications Voltage Accuracy ± 2% Short Circuit Protection Continuous Line Regulation ± 0.5% Load Regulation (0% - 100%) ± 0.5% (3.3Vout Models: ± 1.0%) Ripple and Noise (20Mhz bandwidth) 50 mV pk-pk Temperature Coefficient ± 0.02% / ° C Gen eral Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 3000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 50 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 3.5 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 2.7g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM M 4 series is a family of cost effective 1 W regulated single output DC/DC converters with short circuit protection. The se converters are in an ultra miniature SIP7 case. Devices are encapsulated . High performance features: Regulated Output, 3000VDC input/output is olation, high efficiency operation, output voltage accuracy of ±2% maximum, input range of ±10% tolerance and low output ripple and noise. PMM4-SERIES /checkbld 1 Watt /checkbld Regulated /checkbld Short Circuit Protection /checkbld Single Output /checkbld SIP7 Case /checkbld 3 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.04-2015
PMM4-Series – P6LG-xxxxEK – Single Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P6LG-053R3EK 5 30 363 3.3 333 55 220 P6LG-0505EK 5 30 312 5 200 64 220 P6LG-057R2EK 5 30 312 7.2 138.9 64 220 P6LG-0509EK 5 35 307 9 111.1 65 220 P6LG-0512EK 5 35 303 12 83.3 66 220 P6LG-0515EK 5 35 303 15 66.7 66 220 P6LG-123R3EK 12 20 148 3.3 333 56 220 P6LG-1205EK 12 20 130 5 200 64 220 P6LG-127R2EK 12 20 128 7.2 138.9 65 220 P6LG-1209EK 12 20 126 9 111.1 66 220 P6LG-1212EK 12 20 126 12 83.3 66 220 P6LG-1215EK 12 20 122 15 66.7 68 220 P6LG-243R3EK 24 10 74 3.3 333 56 220 P6LG-2405EK 24 10 66 5 200 63 220 P6LG-247R2EK 24 10 64 7.2 138.9 65 220 P6LG-2409EK 24 10 63 9 111.1 66 220 P6LG-2412EK 24 10 62 12 83.3 67 220 P6LG-2415EK 24 10 62 15 66.7 67 220 If you need other specifications, please enquire. Notes:
PMM4-Series – P6LG-xxxxEK – Single Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating 10.00 (0.39) 0.50 (0.02) 2.00 (0.08) 0.25 (0.01) 3.00 (0.12) # SINGLE (3KV) 1 +Vin 2 - Vin
4 Omitted
6 Omitted
App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. EMV Specifications Conducted Disturbance Radiated Emission EN55022, CLASS B EN55022, CLASS B ESD RS EFT Surge CS PFMF IEC61000-4-2 Perf. Criteria A IEC61000-4-3 Perf. Criteria A IEC61000-4-4 Perf. Criteria A IEC61000-4-5 Perf. Criteria A IEC61000-4-6 Perf. Criteria A IEC61000-4-8 Perf. Criteria A EMI Filter: Input Filter Components help to meet conducted emissions requirement. C1: 470uF/100V L: 12uH