P6KE MERITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Plastic package. Glass passivated chip junction in DO-15 package. 600W peak pulse power capability on 10/1000μs waveform. Excellent clamping capability. Low zener impedance. Fast response time: typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1μA above 10V. High temperature soldering guaranteed: 265 ć/10 seconds/.375”, (9.5mm) lead length, 5lbs., (2.3kg) tension. M Case: JEDEC DO-15 Molded Plastic. Terminals: Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bidirectional . Mounting Position: Any. Weight: 0.015 ounce, 0.4 grams. D For Bidirectional, use C or CA suf fix for type P6 KE6.8 through type P6KE550 (e.g. P6KE6.8C, P6KE550CA); Electrical characteristics apply in both directions. M Ratings at 25ć ambient temperature unless otherwise specified. DO-204AC/DO-15 Peak Pulse Power Dissipation on 10/1000 ȝs waveform. (Note 1ˈFig. 1) PPPM Minimum 600 Watts Peak Pulse Current on 10/1000 ȝs waveform. (Note 1ˈFig. 3) IPPM See Table Amps Steady State Power Dissipation at TL =75ćˈLead length .375” (9.5mm). (Fig. 5) PM(AV) 5.0 Watts Peak Forward Surge Currentˈ8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 2, Fig. 6) IFSM 100 Amps Operating junction and Storage Temperature Range. TJ ,T STG -55 to +175 ć
FEATURES
DEVICES FOR BIPOLAR APPLICATION UL E223045 Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25ć per Fig. 2. 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per min ute maximum. RATING SYMBOL VA LUE UNIT MAXIMUM RATINGS AND CHARACTERISTICS Transient 9ROWDJH6XSSUHVVRUV P6KE Series MERITEK All specifications are subject to change without notice. Rev 7
Transient 9ROWDJH6XSSUHVVRUV P6KE Series MERITEK LLT d sDIA. DIA. DO-204AC/DO-15 PACKAGE DIMENSIONS SPECIFICATIONS Part Number Reverse Stand-Off Voltage Breakdown Voltage MIN.@IT Breakdown Voltage MAX.@IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRWM UNI-POLAR BI-POLAR VRWM(V) V BR MIN.(V) V BR MAX.(V) I T(mA) V C(V) I PP(A) I R(μA) Millimeters InchesItem Min. Max. Min. Max. L 25.40 - 1.000 - T 5.80 7.60 0.230 0.300 d 2.60 3.60 0.104 0.140 s 0.71 0.86 0.028 0.034 Rev 7
Transient 9ROWDJH6XSSUHVVRUV P6KE Series MERITEK SPECIFICATIONS Part Number Reverse Stand-Off Voltage Breakdown Voltage MIN.@IT Breakdown Voltage MAX.@IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRWM UNI-POLAR BI-POLAR VRWM(V) V BR MIN.(V) V BR MAX.(V) I T(mA) V C(V) I PP(A) I R(μA) Note: For Bidirectional type having VRWM of 10 volts and less,the IR limit doubles. Rev 7