P6FG-0509E21LF

P6FG_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P6FG-xxxxE/Z2:1(H30)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (see table) Input Filter Capacitor Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Indefinite (Automatic Recovery) Line Regulation ± 0.5% Load Regulation (25% - 100%) ± 1% Ripple and Noise (20Mhz bandwidth) 80 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications I/O Isolation Voltage (3 sec.) 1000 VDC (3000 VDC optional)* I/O Isolation Capacity 60 pF I/O Isolation Resistance 1000 M Ohm Switching Frequency 100 - 650 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 2.732 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 6 g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM B 1 Watt series is a family of cost effective 1 W single and dual output DC/DC converters with an optional control Pi n (SIP). These converters are encapsulated in an ultra miniature S IP8 or DIP16 plastic or metal case. High performance features: continuous / long time short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±2% maximum. PMB-SERIES /checkbld 1 Watt /checkbld 2:1 Wide Input /checkbld Reg. Single and Dual Output /checkbld 1 - 3 kV DC I/O Isolation /checkbld DIP16 case /checkbld Contin. Short Circuit Protection Rev.04-2009

PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P6FG-053R3E2:1LF 4.5-9 15 298 3.3 76 303 67 3300 P6FG-0505E2:1LF 4.5-9 15 298 5 50 200 67 3300 P6FG-0509E2:1LF 4.5-9 40 285 9 28 111 70 470 P6FG-0512E2:1LF 4.5-9 55 285 12 21 83 70 470 P6FG-0515E2:1LF 4.5-9 55 285 15 17 67 70 470 P6FG-0524E2:1LF 4.5-9 70 294 24 10 42 68 220 P6FG-123R3E2:1LF 9-18 15 119 3.3 76 303 70 3300 P6FG-1205E2:1LF 9-18 15 115 5 50 200 72 3300 P6FG-1209E2:1LF 9-18 15 108 9 28 111 77 470 P6FG-1212E2:1LF 9-18 15 108 12 21 83 77 470 P6FG-1215E2:1LF 9-18 15 108 15 17 67 77 470 P6FG-1224E2:1LF 9-18 15 114 24 10 42 73 220 P6FG-243R3E2:1LF 18-36 8 59 3.3 76 303 70 3300 P6FG-2405E2:1LF 18-36 8 57 5 50 200 72 3300 P6FG-2409E2:1LF 18-36 8 55 9 28 111 75 470 P6FG-2412E2:1LF 18-36 8 55 12 21 83 75 470 P6FG-2415E2:1LF 18-36 8 55 15 17 67 75 470 P6FG-2424E2:1LF 18-36 8 55 24 10 42 75 220 P6FG-483R3E2:1LF 36-72 6 31 3.3 76 303 66 3300 P6FG-4805E2:1LF 36-72 6 30 5 50 200 68 3300 P6FG-4809E2:1LF 36-72 6 29 9 28 111 70 470 P6FG-4812E2:1LF 36-72 6 29 12 21 83 70 470 P6FG-4815E2:1LF 36-72 6 29 15 17 67 70 470 P6FG-4824E2:1LF 36-72 6 30 24 10 42 68 220 If you need other specifications, please enquire. *OPTIONS: 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P6FG-2424E2:1 H30LF for 3kV)

PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P6FG-053R3Z2:1LF 4.5-9 15 285 ±3.3 ±38 ±152 70 ±1000 P6FG-0505Z2:1LF 4.5-9 15 270 ±5.0 ±25 ±100 74 ±1000 P6FG-0509Z2:1LF 4.5-9 20 270 ±9.0 ±14 ±56 74 ±220 P6FG-0512Z2:1LF 4.5-9 20 266 ±12.0 ±10 ±42 75 ±220 P6FG-0515Z2:1LF 4.5-9 40 285 ±15.0 ±8 ±33 70 ±220 P6FG-0524Z2:1LF 4.5-9 70 298 ±24.0 ±5 ±21 67 ±100 P6FG-123R3Z2:1LF 9-18 15 119 ±3.3 ±38 ±152 70 ±1000 P6FG-1205Z2:1LF 9-18 15 115 ±5.0 ±25 ±100 72 ±1000 P6FG-1209Z2:1LF 9-18 15 109 ±9.0 ±14 ±56 76 ±220 P6FG-1212Z2:1LF 9-18 15 109 ±12.0 ±10 ±42 76 ±220 P6FG-1215Z2:1LF 9-18 15 112 ±15.0 ±8 ±33 74 ±220 P6FG-1224Z2:1LF 9-18 40 124 ±24.0 ±5 ±21 67 ±100 P6FG-243R3Z2:1LF 18-36 8 59 ±3.3 ±38 ±152 70 ±1000 P6FG-2405Z2:1LF 18-36 8 59 ±5.0 ±25 ±100 70 ±1000 P6FG-2409Z2:1LF 18-36 8 54 ±9.0 ±14 ±56 76 ±220 P6FG-2412Z2:1LF 18-36 8 54 ±12.0 ±10 ±42 77 ±220 P6FG-2415Z2:1LF 18-36 8 55 ±15.0 ±8 ±33 75 ±220 P6FG-2424Z2:1LF 18-36 20 59 ±24.0 ±5 ±21 70 ±100 P6FG-483R3Z2:1LF 36-72 6 30 ±3.3 ±38 ±152 70 ±1000 P6FG-4805Z2:1LF 36-72 6 30 ±5.0 ±25 ±100 70 ±1000 P6FG-4809Z2:1LF 36-72 6 28 ±9.0 ±14 ±56 74 ±220 P6FG-4812Z2:1LF 36-72 6 27 ±12.0 ±10 ±42 76 ±220 P6FG-4815Z2:1LF 36-72 6 29 ±15.0 ±8 ±33 72 ±220 P6FG-4824Z2:1LF 36-72 12 30 ±24.0 ±5 ±21 70 ±100 If you need other specifications, please enquire. *OPTIONS: 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P6FG-2424Z2:1 H30LF for 3kV)

PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Bottom View 1 8 916 17.78 (0.70) 10.16 (0.40) 2.54 (0.10) 0.50 (0.02) PE AK Modelcode Datecode 10.16 (0.40) 3.05 (0.12) 14.00 (0.55) 23.40 (0.92) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. DIP16 – PLASTIC CASE 0.50 (0.02) # SINGLE DUAL 1 - Vin - Vin 2 - Vin - Vin 6 N.C. Common 8 N.C. - Vout 9 +Vout +Vout 11 - Vout Common 15 +Vin +Vin 16 +Vin +Vin (same pinning for 3kV) PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH ² = Tested by nominal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.