P6CU-3R33R3ELF

P6CU_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PM1-Series – P6CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P6CU-xxxxE/Z LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitor Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (20% - 100%) ± 10% (3.3 Vout Models: ± 20%) Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 80 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 2.3g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM1 series P6CU -xxxxE/ZLF is a family of cost effective 1 W single & dual output DC-DC converters. These converters are in an ultra miniature SIP7 case. Devices are encapsulated. High performan ce features: 1000VDC input/output isolation, high efficiency ope ration, output voltage accuracy of ±3% maximum, input range of ±10% tolera nce and low output ripple and noise. PM1-SERIES /checkbld 1 Watt /checkbld Unregulated /checkbld Single and Dual Output /checkbld SIP7 Case /checkbld 1 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.02-2009

PM1-Series – P6CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V d c ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P6CU-3R33R3ELF 3.3 22 409 3.3 303 74 220 P6CU-3R305ELF 3.3 28 398 5 200 76 220 P6CU-053R3ELF 5 30 267 3.3 303 75 220 P6CU-0505ELF 5 30 256 5 200 78 220 P6CU-057R2ELF 5 30 270 7.2 138.9 74 220 P6CU-0509ELF 5 30 267 9 111.1 75 220 P6CU-0512ELF 5 30 263 12 83.3 76 220 P6CU-0515ELF 5 30 263 15 66.7 76 220 P6CU-0518ELF 5 30 267 18 55.6 75 220 P6CU-0524ELF 5 30 278 24 41.7 72 220 P6CU-123R3ELF 12 20 113 3.3 303 74 220 P6CU-1205ELF 12 20 113 5 200 74 220 P6CU-127R2ELF 12 20 113 7.2 138.9 74 220 P6CU-1209ELF 12 20 111 9 111.1 75 220 P6CU-1212ELF 12 20 108 12 83.3 77 220 P6CU-1215ELF 12 20 106 15 66.7 78 220 P6CU-1218ELF 12 20 106 18 55.6 78 220 P6CU-1224ELF 12 20 113 24 41.7 75 220 P6CU-243R3ELF 24 10 56 3.3 303 75 220 P6CU-2405ELF 24 10 54 5 200 77 220 P6CU-247R2ELF 24 10 56 7.2 138.9 75 220 P6CU-2409ELF 24 10 56 9 111.1 75 220 P6CU-2412ELF 24 10 53 12 83.3 78 220 P6CU-2415ELF 24 10 53 15 66.7 78 220 P6CU-2418ELF 24 10 53 18 55.6 78 220 P6CU-2424ELF 24 10 53 24 41.7 78 220 P6CU-483R3ELF 48 6 29 3.3 303 72 220 P6CU-4805ELF 48 6 29 5 200 72 220 P6CU-487R2ELF 48 6 29 7.2 138.9 72 220 P6CU-4809ELF 48 6 28 9 111.1 74 220 P6CU-4812ELF 48 6 28 12 83.3 74 220 P6CU-4815ELF 48 6 28 15 66.7 75 220 P6CU-4818ELF 48 6 29 18 55.6 72 220 P6CU-4824ELF 48 6 30 24 41.7 70 220 If you need other specifications, please enquire.

PM1-Series – P6CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V d c ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F ) DUAL OUTPUT P6CU-053R3ZLF 5 30 307 ± 3.3 ± 151.5 65 ± 100 P6CU-0505ZLF 5 30 270 ± 5 ± 100 74 ± 100 P6CU-057R2ZLF 5 30 259 ± 7.2 ± 69.44 77 ± 100 P6CU-0509ZLF 5 30 256 ± 9 ± 55.55 78 ± 100 P6CU-0512ZLF 5 30 256 ± 12 ± 41.67 78 ± 100 P6CU-0515ZLF 5 30 250 ± 15 ± 33.33 80 ± 100 P6CU-0518ZLF 5 30 253 ± 18 ± 27.77 79 ± 100 P6CU-0524ZLF 5 30 250 ± 24 ± 20.83 80 ± 100 P6CU-123R3ZLF 12 20 126 ± 3.3 ± 151.5 66 ± 100 P6CU-1205ZLF 12 20 111 ± 5 ± 100 75 ± 100 P6CU-127R2ZLF 12 20 109 ± 7.2 ± 69.44 76 ± 100 P6CU-1209ZLF 12 20 109 ± 9 ± 55.55 76 ± 100 P6CU-1212ZLF 12 20 106 ± 12 ± 41.67 78 ± 100 P6CU-1215ZLF 12 20 104 ± 15 ± 33.33 80 ± 100 P6CU-1218ZLF 12 20 104 ± 18 ± 27.77 80 ± 100 P6CU-1224ZLF 12 20 109 ± 24 ± 20.83 76 ± 100 P6CU-243R3ZLF 24 10 61 ± 3.3 ± 151.5 68 ± 100 P6CU-2405ZLF 24 10 56 ± 5 ± 100 74 ± 100 P6CU-247R2ZLF 24 10 54 ± 7.2 ± 69.44 76 ± 100 P6CU-2409ZLF 24 10 54 ± 9 ± 55.55 76 ± 100 P6CU-2412ZLF 24 10 53 ± 12 ± 41.67 78 ± 100 P6CU-2415ZLF 24 10 53 ± 15 ± 33.33 78 ± 100 P6CU-2418ZLF 24 10 53 ± 18 ± 27.77 78 ± 100 P6CU-2424ZLF 24 10 53 ± 24 ± 20.83 78 ± 100 P6CU-483R3ZLF 48 6 34 ± 3.3 ± 151.5 60 ± 100 P6CU-4805ZLF 48 6 30 ± 5 ± 100 70 ± 100 P6CU-487R2ZLF 48 6 30 ± 7.2 ± 69.44 70 ± 100 P6CU-4809ZLF 48 6 29 ± 9 ± 55.55 72 ± 100 P6CU-4812ZLF 48 6 28 ± 12 ± 41.67 74 ± 100 P6CU-4815ZLF 48 6 28 ± 15 ± 33.33 74 ± 100 P6CU-4818ZLF 48 6 29 ± 18 ± 27.77 72 ± 100 P6CU-4824ZLF 48 6 30 ± 24 ± 20.83 70 ± 100 If you need other specifications, please enquire.

PM1-Series – P6CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Modelcode Datecode 1 2 4 5 6 7 6.00* (0.24)19.50 (0.76) 15.24 (0.60) 2.54 (0.10) 0.50 (0.02) 0.50 (0.02) 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. * The thickness of 48Vin voltage is 7.20(0.28) PE AK SIP 7 – PLASTIC CASE # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin 4 - Vout - Vout

5 Omitted Common

7 Omitted Omitted

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - For reduce converter’s ripple & noise, it is recommended to add a 4.7 µF~100 µF(±4.7 µF~±68 µF for dual output) capacitor in output end. For EMI performance improvement, it is recommended to add a 12 µH inductor and a 10 µF~100 µF capacitor in input end. EMC SPECIFICATIONS Radiated Emissions EN 55022 FCC 47CFR Part 15/A CLASS B CLASS B ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A