P6CG_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

PM2-Series – P6CG-xxxxZSLF – Dual Split Output – SI P7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/2 P6CG-xxxxZSLF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitors Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 2% Line Regulation ± 0.4% Load Regulation (0% - 100%) ± 0.3% Ripple and Noise (20Mhz bandwidth) 50 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 80 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 2.5g, typ. Environment Specifications Operating Temperature -25 to +71° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM 2 series P6CG -xxxxZSLF is a family of cost effective 1 W regulated dual split output DC/DC converters. These converter s are in an ultra miniature SIP7 case. Devices are encapsulated. High performance features: Regulated Output, 1000VDC input/output is olation, high efficiency operation, output voltage accuracy of ±2% maximum, input range of ±10% tolerance and low output ripple and noise. PM2-SERIES /checkbld 1 Watt /checkbld Regulated /checkbld Dual Split Output /checkbld SIP7 Case /checkbld 1 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.02-2009

PM2-Series – P6CG-xxxxZSLF – Dual Split Output – SI P7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/2 Selection Guide Dual Split Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL SPLIT OUTPUT P6CG-0505ZSLF 5 28 307 5, 5 100, 100 65 100 P6CG-1205ZSLF 12 15 124 5, 5 100, 100 67 100 P6CG-1505ZSLF 15 12 99 5, 5 100, 100 67 100 P6CG-2405ZSLF 24 8 59 5, 5 100, 100 70 100 If you need other specifications, please enquire. Package / Pinning / Derating Modelcode Datecode 1 2 4 5 6 7 6.00 (0.24)19.50 (0.76) 15.24 (0.60) 2.54 (0.10) 0.50 (0.02) 0.50 (0.02) 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. PE AK SIP 7 – PLASTIC CASE # DUAL SPLIT 1 +Vin 2 - Vin 4 +V2 out

5 Ground

7 Omitted

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.