P6CG-0503E PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Telefon: +49 (0) 6135 931069 Telefax: +49 (0) 6135 931070 www.peak-electronics.de info@peak-electronics.de P6CG-XXXXE 1KV ISOLATED 1 W REGULATED SINGLE OUTPUT SIP7 Available Inputs: 5, 12 and 24 VDC Available Outputs: 3.0, 3.3, 5, 9, and 12 VDC Other specifications please enquire. Electrical Specifications (Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified) Input Specifications Voltage range +/- 10 % Filter Capacitors Isolation Specifications Rated voltage
1000 VDC
109 Ohm
60 pF typ. Output Specifications Voltage accuracy +/- 2 % Ripple and noise (at 20 MHz BW) 50 mV p-p, max. Short circuit protection Short term Line voltage regulation +/- 0,5 % max., (3.3 VDC output +/- 1 % max ) Load voltage regulation +/- 0,5 % typ., +/- 1 % max. (No load to full load) Temperature coefficient +/- 0,02 % / °C General Specifications Efficiency 58 % to 66 % Switching frequency 70 KHz, typ. Environmental Specifications Operating temperature (ambient) - 40° C to + 85° C Storage temperature - 55 °C to + 125 °C Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics Dimensions SIP 19,50 x 7,20 x 9,50 mm 0,76 x 0,28 x 0,37 inches Weight 2,7 g Case material Non conductive black plastic Examples of Partnumbers/Modelcode PART NO. INPUT VOLTAGE (VDC) INPUT CURRENT NO LOAD INPUT CURRENT FULL LOAD OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (max. mA) EFFICIENCY FULL LOAD (% TYP.) P6CG-0503E 200 200 P6CG-053R3E 220 3,3 200 P6CG-054R8E 318 4,85 200 P6CG-0505E 312 200 P6CG-0509E 312 111 P6CG-0512E 312 P6CG-1203E 200 P6CG-123R3E 3,3 200 P6CG-124R8E 133 4,85 200 P6CG-1205E 130 200 P6CG-1209E 123 111 P6CG-1212E 123 P6CG-2403E 200 P6CG-243R3E 3,3 200 P6CG-244R8E 4,85 200 P6CG-2405E 200 P6CG-2409E 111 P6CG-2412E
P6CG-XXXXE 1KV ISOLATED 1 W REGULATED SINGLE OUTPUT SIP7 Dimensions PEAK Modelcode Datecode Printing 7.20 (0.28) 19.50 (0.76) 10.00 (0.39) 15.20 (0.60) 2.54 (0.10) 0.50 (0.02) 3.05 (0.12) 0.50 (0.02) 2.00 (0.08) 0.50 (0.02) 0.25 (0.01) All dimensions are typical in millimeters (inches). Tolerance x.xx = +/- 0.30 (+/- 0.01) Specification may change without notice. Derating Graph and Pinning Safe operating area Temperature Derating Graph Ambient Temperature ° C 0.60 W 1.00 W 1.50 W - 40 100 Output 0.75 W 1.25 W PIN Connection Single V Input V Input V Output Omitted V Output Omitted If specification prior to this data sheet is needed, please enquire. Specification can be changed without notice. Copyright PEAK electronics GmbH REV:A / 06.2003