P600A GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage -50 to 1000 Volts Forward Current -6.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High forward current capability ♦ Construction utilizes void-free molded plastic technique ♦ High surge current capability ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case : Void-free molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position:A n y Weight: 0.07 ounce, 2.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS P600A P600B P600D P600G P600J P600K P600M UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at TA=60°C, 0.375" (9.5mm) lead length (FIG 1) I(AV) 6.0 Amps TL=60°C, 0.125" (3.18mm) lead length (FIG 2) 22.0 Peak forward surge current 8.3ms single half sine-wave superimposed on I FSM 400.0 Amps rated load (JEDEC Method) Maximum instantaneous forward voltage at: 6.0A 0.90 1.0 100A VF 1.30 1.4 Volts Maximum DC reverse current T A= 25°C 5.0 µA at rated DC blocking voltage T A=100°C IR 1.0 mA Typical junction capacitance (NOTE 1) C J 150.0 pF Typical reverse recovery time (NOTE 2) trr 2.5 µS Typical thermal resistance (NOTE 3) R Θ JA 20.0 R Θ JL 4.0 °C/W Operating junction and storage temperature range TJ, TSTG -50 to +150 °C NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery time conditions: I F=0.5A, IR =1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, 10/12/98 0.052 (1.32) 0.048 (1.22) 0.360 (9.1) 0.340 (8.6) DIA. 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 1.0 (25.4) MIN. Case Style P600 Dimensions in inches and (millimeters)

RATINGS AND CHARACTERISTIC CURVES P600A THRU P600M FIG.1 - MAXIMUM FORWARD CURRENT DERATING CURRENT AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES

60 HZ RESISTIVE OR

AVERAGE FORWARD CURRENT, AMPERES LEAD TEMPERATURE, °C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 2 - MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES TJ=150°C TJ=100°C TA=25°C STANDARD P .C.B. MOUNTING L=0.625” (15.8mm) L=0.125” (3.18mm) 60 HZ RESISTIVE OR INDUCTIVE LOAD BOTH LEADS ATTACHED to HEAT SINKS WITH LENGTH as SHOWN, L L=0.25” (6.35mm)L=0.375” (9.5mm) TJ=125°C

8.3 SINGLE HALF SINE-WAVE

(JEDEC Method) 1.1 x 1.1” (30 x 30mm) COPPER PADS 0.375” (9.5mm) LEAD LENGTH INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE t, PULSE DURATION, sec. TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 5 - TYPICAL REVERSE CHARACTERISTIC PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=25°C