P47WG-1205E21LF

P47WG_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PM7-Series – P47WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P47WG-xxxxE/Z2:1(H35)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (See Table) Input Filter Capacitors Input Reflected Ripple Current¹ 35 mA pk-pk Start up Time (Nom. Vin and constant resistive load) 20mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (Automatic Recovery) Over Current Protection 140% of max. Iout Line Regulation ± 0.5% Load Regulation (10% - 100%) ± 0.5% Ripple and Noise (20Mhz bandwidth) 100 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC (3000 VDC optional)* I/O Isolation Capacitance 470 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 200 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Nickel Coated Brass Potting Material Epoxy (UL94V-0 rated) Weight ~ 30g, typ. Environment Specifications Operating Temperature -40 to +71° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM7 series P47WG -xxxxE/Z2:1 (H35) LF is a family of cost effective 15W, single & dual output DC-DC converters with a w ide input range of 2:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1500VDC up to 3500VDC in put/output isolation voltage, continuous short circuit protection with a utomatic restart and tight line / load regulation, high efficiency operation a nd output voltage accuracy of ±1% maximum. PM7-SERIES /checkbld 15 Watt /checkbld 2:1 Wide Input /checkbld 2” x 1” Case /checkbld 1.5 - 3.5 kV DC I/O Isolation /checkbld Regulated Output /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. Rev.03-2009

PM7-Series – P47WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P47WG-123R3E2:1LF 9-18 30 1031 3.3 300 3000 80 3300 P47WG-1205E2:1LF 9-18 30 1524 5 300 3000 82 3300 P47WG-127R2E2:1LF 9-18 30 1506 7.2 208 2083 83 2200 P47WG-1209E2:1LF 9-18 30 1470 9 166 1666 85 1000 P47WG-1212E2:1LF 9-18 30 1470 12 125 1250 85 1000 P47WG-1215E2:1LF 9-18 30 1470 15 100 1000 85 680 P47WG-1218E2:1LF 9-18 30 1470 18 83 833 85 470 P47WG-1224E2:1LF 9-18 30 1453 24 62 625 86 470 P47WG-243R3E2:1LF 18-36 25 515 3.3 300 3000 80 3300 P47WG-2405E2:1LF 18-36 25 744 5 300 3000 84 3300 P47WG-247R2E2:1LF 18-36 25 744 7.2 208 2083 84 2200 P47WG-2409E2:1LF 18-36 25 735 9 166 1666 85 1000 P47WG-2412E2:1LF 18-36 25 735 12 125 1250 85 1000 P47WG-2415E2:1LF 18-36 25 726 15 100 1000 86 680 P47WG-2418E2:1LF 18-36 25 726 18 83 833 86 470 P47WG-2424E2:1LF 18-36 25 718 24 62 625 87 470 P47WG-483R3E2:1LF 36-72 20 257 3.3 300 3000 80 3300 P47WG-4805E2:1LF 36-72 20 372 5 300 3000 84 3300 P47WG-487R2E2:1LF 36-72 20 372 7.2 208 2083 84 2200 P47WG-4809E2:1LF 36-72 20 367 9 166 1666 85 1000 P47WG-4812E2:1LF 36-72 20 363 12 125 1250 86 1000 P47WG-4815E2:1LF 36-72 20 359 15 100 1000 87 680 P47WG-4818E2:1LF 36-72 20 359 18 83 833 87 470 P47WG-4824E2:1LF 36-72 20 359 24 62 625 87 470 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “ H35” before LF! /barb2right Example: P47WG-2409E2:1H35 LF for 3.5kV Notes:

PM7-Series – P47WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P47WG-123R3Z2:1LF 9-18 30 1562 ± 3.3 ± 150 ± 1500 80 ± 1000 P47WG-1205Z2:1LF 9-18 30 1524 ± 5 ± 150 ± 1500 82 ± 1000 P47WG-127R2Z2:1LF 9-18 30 1506 ± 7.2 ± 104 ± 1041 83 ± 680 P47WG-1209Z2:1LF 9-18 30 1488 ± 9 ± 83 ± 833 84 ± 470 P47WG-1212Z2:1LF 9-18 30 1488 ± 12 ± 62 ± 625 84 ± 470 P47WG-1215Z2:1LF 9-18 30 1488 ± 15 ± 50 ± 500 84 ± 330 P47WG-1218Z2:1LF 9-18 30 1470 ± 18 ± 41 ± 416 85 ± 220 P47WG-1224Z2:1LF 9-18 30 1470 ± 24 ± 31 ± 312 85 ± 220 P47WG-243R3Z2:1LF 18-36 25 515 ± 3.3 ± 150 ± 1500 80 ± 1000 P47WG-2405Z2:1LF 18-36 25 753 ± 5 ± 150 ± 1500 83 ± 1000 P47WG-247R2Z2:1LF 18-36 25 744 ± 7.2 ± 104 ± 1041 84 ± 680 P47WG-2409Z2:1LF 18-36 25 735 ± 9 ± 83 ± 833 85 ± 470 P47WG-2412Z2:1LF 18-36 25 726 ± 12 ± 62 ± 625 86 ± 470 P47WG-2415Z2:1LF 18-36 25 726 ± 15 ± 50 ± 500 86 ± 330 P47WG-2418Z2:1LF 18-36 25 718 ± 18 ± 41 ± 416 87 ± 220 P47WG-2424Z2:1LF 18-36 25 718 ± 24 ± 31 ± 312 87 ± 220 P47WG-483R3Z2:1LF 36-72 20 257 ± 3.3 ± 150 ± 1500 80 ± 1000 P47WG-4805Z2:1LF 36-72 20 372 ± 5 ± 150 ± 1500 84 ± 1000 P47WG-487R2Z2:1LF 36-72 20 372 ± 7.2 ± 104 ± 1041 84 ± 680 P47WG-4809Z2:1LF 36-72 20 367 ± 9 ± 83 ± 833 85 ± 470 P47WG-4812Z2:1LF 36-72 20 363 ± 12 ± 62 ± 625 86 ± 470 P47WG-4815Z2:1LF 36-72 20 359 ± 15 ± 50 ± 500 87 ± 330 P47WG-4818Z2:1LF 36-72 20 359 ± 18 ± 41 ± 416 87 ± 220 P47WG-4824Z2:1LF 36-72 20 359 ± 24 ± 31 ± 312 87 ± 220 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “ H35” before LF! /barb2right Example: P47WG-2409Z2:1H35 LF for 3.5kV Notes:

PM7-Series – P47WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating PE AK Modelcode Datecode 50.80 (2.00) 10.16 (0.40) 5.08 (0.20) min. Bottom View 3 5 4 10.16 (0.40) 1 2 10.16 (0.40) 5.08 (0.20) 15.24 (0.60) 15.24 (0.60) 20.32 (0.80) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) 25.40 (1.00) Vin: Vout: Iout: Vin -Vout COM (if Dual) +Vout - + DIA. 1.00 (0.04) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 2" x 1" – METAL CASE # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin 3 +Vout +Vout

4 Omitted Common

same Pinning for 3.5 kV Isolation PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - Suggest adding input external filter (C1 , C2 , L ) to meet conducted emissions (En55022 class A). EMC SPECIFICATIONS Radiated Emissions EN 55022 FCC 47CFR Part 15/A CLASS A CLASS A ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A