P44TG-243R3E41LF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PMV-Series – P44TG-xxxxE/Z4:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P44TG-xxxxE/Z4:1MLF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 4:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current 20 mA pk-pk Start-up Time 20mS, typ Output Specifications Voltage Accuracy ± 1.2% Short Circuit Protection Indefinite (hiccup, Automatic Recovery) Line Regulation ± 0.2% Load Regulation (0% – 100%) ± 0.5% (Single Out) ± 1.0% (Dual Out) Cross Regulation1 (Dual Output) ± 5% Ripple and Noise 3 (20Mhz bandwidth) 85 mV pk-pk Over Load Protection 170% of FL, typ. Temperature Coefficient ± 0.02% / ° C Transient Recovery Time 4 250us, typ. Transient Response Deviation 4 ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacitance 1500 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 270 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1 Mhrs Physical Specifications Case Material Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 18g, typ. Environment Specifications Operating Temperature -40 to +60° C (ambient, for 100% load) Maximum Case Temperature 105° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM V 12 W series P 44 TG -xxxxE/Z 4 :1 M LF is a family of cost effective 12W single & dual output DC-DC converters. These co nverters are encapsulated in miniature DIP24 metal case. High pe rformance features: Synchronous rectification, 1500VDC input/output iso lation, continuous short circuit protection with automatic restart and tight line / load regulation, high efficiency operation, output voltage accuracy of ±1 .2% maximum and a wide input range of 4:1 PMV-SERIES /checkbld 12 Watt, 4:1 Ultra Wide Input /checkbld DIP24 Metal Case /checkbld 1.5 kV DC I/O Isolation /checkbld Single and Dual Reg. Output /checkbld Continuous Short Circuit Prot. /checkbld Over Voltage/Load Protection /checkbld Soft Start, Remote Ctrl. Rev.02-2009

PMV-Series – P44TG-xxxxE/Z4:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P44TG-243R3E4:1LF 9-36 15 573 3.3 0 3500 87 2000 P44TG-245R1E4:1LF 9-36 15 581 5.1 0 2400 89 2000 P44TG-2412E4:1LF 9-36 15 574 12 0 1000 90 430 P44TG-2415E4:1LF 9-36 15 574 15 0 800 90 300 P44TG-483R3E4:1LF 18-75 15 286 3.3 0 3500 87 2000 P44TG-485R1E4:1LF 18-75 15 290 5.1 0 2400 89 2000 P44TG-4812E4:1LF 18-75 15 287 12 0 1000 90 430 P44TG-4815E4:1LF 18-75 15 287 15 0 800 90 300 DUAL OUTPUT P44TG-2405Z4:1LF 9-36 15 595 ± 5 0 ± 1200 87 ± 1250 P44TG-2412Z4:1LF 9-36 15 574 ± 12 0 ± 500 90 ± 200 P44TG-2415Z4:1LF 9-36 15 574 ± 15 0 ± 400 90 ± 120 P44TG-4805Z4:1LF 18-75 15 297 ± 5 0 ± 1200 87 ± 1250 P44TG-4812Z4:1LF 18-75 15 287 ± 12 0 ± 500 90 ± 200 P44TG-4815Z4:1LF 18-75 15 287 ± 15 0 ± 400 90 ± 120 If you need other specifications, please enquire. Notes:

PMV-Series – P44TG-xxxxE/Z4:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating Bottom View 1 12 13 24 27.94 (1.10) 15.24 (0.60) 2.54 (0.10) PE AK Modelcode Datecode 20.30 (0.80) 31.80 (1.25) 10.20 (0.40) 3.05 (0.12) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Standard Drawing For exact pinning please see connection table! Specification may change without notice. DIP24 – METAL CASE 2.00 (0.08) # SINGLE DUAL 1 Remote Ctrl. Remote Ctrl. 2 - Vin - Vin 3 - Vin - Vin

9 Omitted Common

11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted PIN CONNECTIONS

PMV-Series – P44TG-xxxxE/Z4:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 App Notes: 1 = One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 2 = Tested by minimal Vin and constant resistive load. 3 = Measured with 20MHz bandwidth and 1.0uF ceramic capacitor. 4 = Tested by normal Vin and 25% load step change ( 75%-50%-25% of Io ) 5 = Input filter components (C1, L, C2) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease 6 = An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5 and EN61000-4-. The filter capacitor Peak suggest: Nippon - chemi - con KY series, 330uF/100V Over Voltage Protection (Zender diode clamp) 3.3 Vout: 3.9 V 5.1 Vout 6.2 V

12 Vout 15 V

15 Vout 18 V

± 5 Vout ± 6.2 V ± 12 Vout ± 15 V ± 15 Vout ± 18 V EMC Characteristics Radiated Emissions EN55022 CLASS A Conducted Emissions 5 EN55022 CLASS A ESD EN61000-4-2 Perf. Criteria B RS EN61000-4-3 Perf. Criteria A EFT 6 EN61000-4-4 Perf. Criteria B Surge 6 EN61000-4-5 Perf. Criteria B CS 6 EN61000-4-6 Perf. Criteria A PFMF EN61000-4-8 Perf. Criteria A The Remote on/off controll: ON: 3.0 - 12.0 VDC or open circuit OFF: 0 - 1.2 VDC or short circuit PIN 1 and PIN 2 / 3 OFF idle current: 5.0 mA, typ. C1: 2.2uF, 100V L: 12uH C2: 2.2uH, 100V Notes: