P42WG-4818E21LF

P42WG_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P42WG-xxxxE/Z2:1(H35)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (See Table) Input Filter Capacitors Input Reflected Ripple Current¹ 35 mA pk-pk Start up Time (Nom. Vin and constant resistive load) 20mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (Automatic Recovery) Over Current Protection 140% of max. Iout Line Regulation ± 0.5% Load Regulation (10% - 100%) ± 0.5% Ripple and Noise (20Mhz bandwidth) 100 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC (3000 VDC optional)* I/O Isolation Capacitance 500 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 200 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Nickel Coated Brass Potting Material Epoxy (UL94V-0 rated) Weight ~ 30g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM7 series P42WG -xxxxE/Z2:1 (H35) LF is a family of cost effective 10W, single & dual output DC-DC converters with a w ide input range of 2:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1500VDC up to 3500VDC in put/output isolation voltage, continuous short circuit protection with a utomatic restart and tight line / load regulation, high efficiency operation a nd output voltage accuracy of ±1% maximum. PM7-SERIES /checkbld 10 Watt /checkbld 2:1 Wide Input /checkbld 2” x 1” Case /checkbld 1.5 - 3.5 kV DC I/O Isolation /checkbld Regulated Output /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. Rev.03-2009

PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P42WG-123R3E2:1LF 9-18 30 705 3.3 200 2000 78 2200 P42WG-1205E2:1LF 9-18 30 1016 5 200 2000 82 2200 P42WG-127R2E2:1LF 9-18 30 1004 7.2 138 1388 83 1000 P42WG-1209E2:1LF 9-18 30 1004 9 111 1111 83 1000 P42WG-1212E2:1LF 9-18 30 992 12 83 833 84 680 P42WG-1215E2:1LF 9-18 30 992 15 66 666 84 470 P42WG-1218E2:1LF 9-18 30 980 18 55 555 85 470 P42WG-1224E2:1LF 9-18 30 980 24 41 416 85 330 P42WG-243R3E2:1LF 18-36 25 352 3.3 200 2000 78 2200 P42WG-2405E2:1LF 18-36 25 508 5 200 2000 82 2200 P42WG-247R2E2:1LF 18-36 25 502 7.2 138 1388 83 1000 P42WG-2409E2:1LF 18-36 25 496 9 111 1111 84 1000 P42WG-2412E2:1LF 18-36 25 496 12 83 833 84 680 P42WG-2415E2:1LF 18-36 25 490 15 66 666 85 470 P42WG-2418E2:1LF 18-36 25 490 18 55 555 85 470 P42WG-2424E2:1LF 18-36 25 484 24 41 416 86 330 P42WG-483R3E2:1LF 36-72 20 176 3.3 200 2000 78 2200 P42WG-4805E2:1LF 36-72 20 251 5 200 2000 83 2200 P42WG-487R2E2:1LF 36-72 20 251 7.2 138 1388 83 1000 P42WG-4809E2:1LF 36-72 20 248 9 111 1111 84 1000 P42WG-4812E2:1LF 36-72 20 248 12 83 833 84 680 P42WG-4815E2:1LF 36-72 20 248 15 66 666 84 470 P42WG-4818E2:1LF 36-72 20 245 18 55 555 85 470 P42WG-4824E2:1LF 36-72 20 245 24 41 416 86 330 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “ H35” before LF! /barb2right Example: P42WG-2409E2:1H35 LF for 3.5kV Notes:

PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P42WG-123R3Z2:1LF 9-18 30 1068 ± 3.3 ± 100 ± 1000 78 ± 1000 P42WG-1205Z2:1LF 9-18 30 1016 ± 5 ± 100 ± 1000 82 ± 1000 P42WG-127R2Z2:1LF 9-18 30 1004 ± 7.2 ± 69 ± 694 83 ± 680 P42WG-1209Z2:1LF 9-18 30 992 ± 9 ± 55 ± 555 84 ± 470 P42WG-1212Z2:1LF 9-18 30 992 ± 12 ± 41 ± 416 84 ± 470 P42WG-1215Z2:1LF 9-18 30 980 ± 15 ± 33 ± 333 85 ± 330 P42WG-1218Z2:1LF 9-18 30 980 ± 18 ± 27 ± 277 85 ± 220 P42WG-1224Z2:1LF 9-18 30 980 ± 24 ± 20 ± 208 85 ± 220 P42WG-243R3Z2:1LF 18-36 25 352 ± 3.3 ± 100 ± 1000 78 ± 1000 P42WG-2405Z2:1LF 18-36 25 508 ± 5 ± 100 ± 1000 82 ± 1000 P42WG-247R2Z2:1LF 18-36 25 502 ± 7.2 ± 69 ± 694 83 ± 680 P42WG-2409Z2:1LF 18-36 25 502 ± 9 ± 55 ± 555 83 ± 470 P42WG-2412Z2:1LF 18-36 25 496 ± 12 ± 41 ± 416 84 ± 470 P42WG-2415Z2:1LF 18-36 25 496 ± 15 ± 33 ± 333 84 ± 330 P42WG-2418Z2:1LF 18-36 25 490 ± 18 ± 27 ± 277 85 ± 220 P42WG-2424Z2:1LF 18-36 25 490 ± 24 ± 20 ± 208 85 ± 220 P42WG-483R3Z2:1LF 36-72 20 176 ± 3.3 ± 100 ± 1000 78 ± 1000 P42WG-4805Z2:1LF 36-72 20 254 ± 5 ± 100 ± 1000 82 ± 1000 P42WG-487R2Z2:1LF 36-72 20 248 ± 7.2 ± 69 ± 694 84 ± 680 P42WG-4809Z2:1LF 36-72 20 248 ± 9 ± 55 ± 555 84 ± 470 P42WG-4812Z2:1LF 36-72 20 245 ± 12 ± 41 ± 416 85 ± 470 P42WG-4815Z2:1LF 36-72 20 245 ± 15 ± 33 ± 333 85 ± 330 P42WG-4818Z2:1LF 36-72 20 242 ± 18 ± 27 ± 277 86 ± 220 P42WG-4824Z2:1LF 36-72 20 242 ± 24 ± 20 ± 208 86 ± 220 If you need other specifications, please enquire. * For optional 3.5kV DC I/O Isolation, please add “ H35” before LF! /barb2right Example: P42WG-2409Z2:1H35 LF for 3.5kV Notes:

PM7-Series – P42WG-xxxxE/Z2:1(H35)LF – Single and D ual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating PE AK Modelcode Datecode 50.80 (2.00) 10.16 (0.40) 5.08 (0.20) min. Bottom View 3 5 4 10.16 (0.40) 1 2 10.16 (0.40) 5.08 (0.20) 15.24 (0.60) 15.24 (0.60) 20.32 (0.80) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) 25.40 (1.00) Vin: Vout: Iout: Vin -Vout COM (if Dual) +Vout - + DIA. 1.00 (0.04) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 2" x 1" – METAL CASE # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin 3 +Vout +Vout

4 Omitted Common

same Pinning for 3.5 kV Isolation PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - Suggest adding input external filter (C1 , C2 , L ) to meet conducted emissions (EN 55022 class A). EMC SPECIFICATIONS Radiated Emissions EN 55022 FCC 47CFR Part 15/A CLASS A CLASS A ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A