P42TG-2412Z2:1MLF

P42TG-122R5E21MLF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PMD-Series – P42TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P42TG-xxxxE/Z2:1MLF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 20 mA pk-pk Start Up Time (nom. Vin and constant resistive load) 20mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (hiccup, automatic recovery) Line Regulation² ± 0.5% Load Regulation 3 (Io = 10 - 100%) ± 0.5% (2.5, 3.3Vout Models: ± 0.7%) Cross Regulation 3 (Dual Output) ± 5% Over Current Protection 150% of FL, typ. Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C Transient Recovery Time 4 200us, typ Transient Response Deviation 4 ± 3%, max. General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacity 1000 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 330 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1 Mhrs Physical Specifications Case Material Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 17.0g, typ. Environment Specifications Operating Temperature -40 to +60° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM D 10 W series P42TG -xxxxE/Z2:1MLF is a family of cost effective 10W single & dual output DC-DC converters. These co nverters are encapsulated in miniature DIP24 metal case. High pe rformance features: 1500VDC input/output isolation, continuous short ci rcuit protection with automatic restart and tight line / load regulation, high efficiency operation, output voltage accuracy of ±1% maximum. And a wide input of 2:1 PMD-SERIES /checkbld 10 Watt /checkbld Regulated /checkbld Single and Dual Output /checkbld 1.5 kV DC I/O Isolation /checkbld DIP24 Metal Case /checkbld Continuous Short Circuit Prot. /checkbld Full SMD Technology Rev.09-2010

PMD-Series – P42TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F ) 5 SINGLE OUTPUT P42TG-122R5E2:1MLF 9-18 10 791 2.5 0 3000 81 2200 P42TG-123R3E2:1MLF 9-18 10 1006 3.3 0 3000 84 2200 P42TG-1205E2:1MLF 9-18 10 992 5 0 2000 86 2200 P42TG-1212E2:1MLF 9-18 10 980 12 0 833 87 820 P42TG-1215E2:1MLF 9-18 10 958 15 0 667 89 470 P42TG-242R5E2:1MLF 18-36 10 381 2.5 0 3000 84 2200 P42TG-243R3E2:1MLF 18-36 10 497 3.3 0 3000 85 2200 P42TG-2405E2:1MLF 18-36 10 479 5 0 2000 89 2200 P42TG-2412E2:1MLF 18-36 10 485 12 0 833 88 820 P42TG-2415E2:1MLF 18-36 10 485 15 0 667 88 470 P42TG-482R5E2:1MLF 36-75 10 191 2.5 0 3000 84 2200 P42TG-483R3E2:1MLF 36-75 10 249 3.3 0 3000 85 2200 P42TG-4805E2:1MLF 36-75 10 242 5 0 2000 88 2200 P42TG-4812E2:1MLF 36-75 10 245 12 0 833 87 820 P42TG-4815E2:1MLF 36-75 10 242 15 0 667 88 470 DUAL OUTPUT P42TG-1212Z2:1MLF 9-18 10 980 ± 12 0 ± 416 87 ± 220 P42TG-1215Z2:1MLF 9-18 10 969 ± 15 0 ± 333 88 ± 150 P42TG-2412Z2:1MLF 18-36 10 485 ± 12 0 ± 416 88 ± 220 P42TG-2415Z2:1MLF 18-36 10 474 ± 15 0 ± 333 90 ± 150 P42TG-4812Z2:1MLF 36-75 10 245 ± 12 0 ± 416 87 ± 220 P42TG-4815Z2:1MLF 36-75 10 245 ± 15 0 ± 333 87 ± 150 If you need other specifications, please enquire. Notes:

PMD-Series – P42TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating # SINGLE DUAL 2 - Vin - Vin 3 - Vin - Vin

9 Omitted Common

11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted PIN CONNECTIONS App Notes: 1 = Measured Input reflected ripple current with a simulated source inductance of 12uH. 2 = Operation between no load and 10% load conditions will not demage the module, but it may not meet all specifications listed 3 = One load is 25% - 100%, the other load is 100%, the output voltage variable rate is within ± 5% 4 = Tested by nominal Vin and 25% load step change (75% - 50% - 25% of Io) 5 = Tested by minimal Vin and constant resistor load. 6 = Input filter components (C1,L) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; all leads should be minimized to decrease radiated noise. 7 = An external filter capacitor (e.g. Nippon-chemi-con KY ser. 220uF/100V) is required if the module has to meet EN61000-4-5. EMC SPECIFICATIONS Radiated Emissions EN 55022 CLASS A Conducted Emissions 6 EN55022 CLASS A ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A EFT IEC 61000-4-4 Perf. Criteria B Surge 7 IEC 61000-4-5 Perf. Criteria B CS IEC 61000-4-6 Perf. Criteria A PFMF IEC 61000-4-8 Perf. Criteria A Over Voltage Protection (Zender diode clamp) 2.5 Vout, 3.3 Vout: 3.9 V 5 Vout 6.2 V

12 Vout 15 V

15 Vout 18 V

± 12 Vout ± 15 V ± 15 Vout ± 18 V