P40WG-123R3E21LF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PMT-Series – P40WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P40WG-xxxxE/Z2:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (see table) Input Filter PI Type Input Reflected Ripple Current¹ 20 mA pk-pk Start up Time (Nom. Vin and constant resistive load) 30mS, typ. Output Specifications Voltage Accuracy ± 1% Voltage Adjustability (only Single Output) ± 10%, max. Short Circuit Protection Indefinite (hiccup, automatic recovery) Over Load Protection 115% - 130% of lout, max. Line Regulation ± 0.5%, max. Load Regulation (0% - 100%) ± 0.5% (single) ±1% (dual balanced load), max. Cross Regulation³ ± 5% (dual) Ripple&Noise (20Mhz bandwidth / 1.0uF – pk-pk) 100 mV (3.3 & 5 Vout) 150 mV (others) , max. Temperature Coefficient ± 0.02% / ° C Transient Recovery Time 4 250us, typ. Transient Response Deviation 4 ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) 1600 VDC I/O Isolation Capacitance 1000 pF, max. I/O Isolation Resistance 1000 M Ohm, min. Switching Frequency 270 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) >328 khrs Safety Standard (designed to meet) IEC/EN 60950-1 Physical Specifications Case Material Nickel Coated Copper Potting / Base Material Epoxy / Plastic (UL94V-0 rated) Weight ~ 32g, typ. Environment Specifications Operating Temperature -40 to +71° C (with derating) Maximum Case Temperature 105° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMT series P4 0WG -xxxxE/Z 2 :1LF is a family of cost effective 40 W, single and dual output DC-DC converters with a wide input range of 2:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1600VDC input/output iso lation voltage, continuous short circuit protection with automatic restart and tight line / load regulation, over current protection, over voltage p rotection, over temperature protection, high efficiency operation a nd soft start. PMT-SERIES /checkbld 40 Watt /checkbld 2:1 Wide Input /checkbld 2” x 1” Metal Case /checkbld 1.6 kV DC I/O Isolation /checkbld Regulated Output /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. Rev.05-2011

PMT-Series – P40WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single and Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P40WG-123R3E2:1LF 9-18 100 2444 3.3 0 8000 90 24800 P40WG-1205E2:1LF 9-18 160 3663 5 0 8000 91 13600 P40WG-1212E2:1LF 9-18 40 3663 12 0 3333 91 2300 P40WG-1215E2:1LF 9-18 50 3663 15 0 2666 91 1500 P40WG-243R3E2:1LF 18-36 60 1208 3.3 0 8000 91 21800 P40WG-2405E2:1LF 18-36 90 1811 5 0 8000 92 13600 P40WG-2412E2:1LF 18-36 30 1831 12 0 3333 91 2300 P40WG-2415E2:1LF 18-36 40 1811 15 0 2666 92 1500 P40WG-483R3E2:1LF 36-72 40 605 3.3 0 8000 91 21800 P40WG-4805E2:1LF 36-72 60 905 5 0 8000 92 13600 P40WG-4812E2:1LF 36-72 20 915 12 0 3333 91 2300 P40WG-4815E2:1LF 36-72 20 905 15 0 2666 92 1500 DUAL OUTPUT P40WG-1212Z2:1LF 9-18 50 3663 ± 12 0 ± 1666 91 ± 1200 P40WG-1215Z2:1LF 9-18 50 3623 ± 15 0 ± 1333 92 ± 750 P40WG-2412Z2:1LF 18-36 50 1831 ± 12 0 ± 1666 91 ± 1200 P40WG-2415Z2:1LF 18-36 40 1811 ± 15 0 ± 1333 92 ± 750 P40WG-4812Z2:1LF 36-72 30 906 ± 12 0 ± 1666 92 ± 1200 P40WG-4815Z2:1LF 36-72 40 906 ± 15 0 ± 1333 92 ± 750 If you need other specifications, please enquire. Notes:

PMT-Series – P40WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 10.16 (0.40) 5.08 (0.20) min. Bottom View 4 6 5 10.16 (0.40) 1 2 5.08 (0.20) 5.08 (0.20) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) DIA. 1.00 (0.04) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 2" x 1" – METAL CASE AND OUTPUT MODELS 5.08 (0.20) # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin

3 CTRL CTRL

6 TRIM - Vout

1 = Measured Input reflected ripple current with a simulated source inductance of 12uH. 2 = Tested by minimal Vin and constant resistive load. 3 = Dual: One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 4 = Tested by nominal Vin and 25% load step change (75% - 50% - 25% of Io) 5 = The PMT series can meet EN55022 Class A With an external filter in parallel with the input pins. 6 = An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5 7 = The remote on/off control pin is referenced to –Vin (Pin2).

PMT-Series – P40WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 App Notes EMC SPECIFICATIONS Radiated Emissions EN 55022 CLASS B Conducted Emissions 5 EN 55022 CLASS B ESD EN 61000-4-2 Perf. Criteria A RS EN 61000-4-3 Perf. Criteria A EFT 6 EN 61000-4-4 Perf. Criteria A Surge 6 EN 61000-4-5 Perf. Criteria A CS EN 61000-4-6 Perf. Criteria A PFMF EN 61000-4-8 Perf. Criteria A Over Voltage Protection (Zender diode clamp) 3.3 Vout: 3.9 V 5 Vout 6.2 V

12 Vout 15 V

15 Vout 18 V

± 12 Vout ± 15 V ± 15 Vout ± 18 V Under Input Voltage Lockout (typ.) 12 Vin Models Module ON/OFF 8.6V / 7.9V 24 Vin Models Module ON/OFF 17.8V / 16V 48 Vin Models Module ON/OFF 33.5V / 30.5V Remote ON/OFF Control 7 ON: 3 -12 VDC or open circuit OFF: 0 – 1.2 VDC or short circuit PIN2 and PIN3 OFF idle current: 5mA, typ. 12Vin 24Vin 48Vin Rtrim-up Rtrim-down External Output Trimming Output can be externally trimmed. (Single output models only!) EMI Filter: Input filter components are used to help meet conducted emissions requirement. These components should be mounted as close as possible to the module; all leads should be minimized to decrease radiated noise. CTRL Module ON / OFF Positive logic turns on the module during high logic and off during low logic. Ctrl module on/off can be controlled by an external switch between the ctrl terminal and -Vin terminal. The switch can be an open collector or open drain For positive logic if the ctrl feature is not used, please leave the ctrl pin floating. 12Vin 24Vin 48Vin