P3CU_14 PEAK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
PM1-Series – P3CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P3CU-xxxxE/Z LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitor Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (20% - 100%) ± 10% (3.3 Vout Models: ± 20%) Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 80 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0rated) Potting Material Epoxy (UL94V-0rated) Weight ~ 2.3g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM1 series P3CU -xxxxE/ZLF is a family of cost effective 0.5 W single & dual output DC-DC converters. These converters ar e in an ultra miniature SIP7 case. Devices are encapsulated. High performan ce features: 1000VDC input/output isolation, high efficiency ope ration, output voltage accuracy of ±3% maximum, input range of ±10% tolera nce and low output ripple and noise. PM1-SERIES /checkbld 0.5 Watt /checkbld Unregulated /checkbld Single and Dual Output /checkbld SIP7 Case /checkbld 1 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.02-2009
PM1-Series – P3CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P3CU-3R305ELF 3.3 22 210 5 100 72 100 P3CU-053R3ELF 5 30 142 3.3 151.5 70 100 P3CU-0505ELF 5 30 135 5 100 74 100 P3CU-057R2ELF 5 30 135 7.2 69.4 74 100 P3CU-0509ELF 5 30 133 9 55.5 75 100 P3CU-0512ELF 5 30 131 12 41.6 76 100 P3CU-0515ELF 5 30 131 15 33.3 76 100 P3CU-0518ELF 5 30 131 18 27.8 76 100 P3CU-0524ELF 5 30 128 24 20.8 78 100 P3CU-123R3ELF 12 20 59 3.3 151.5 70 100 P3CU-1205ELF 12 20 57 5 100 73 100 P3CU-127R2ELF 12 20 56 7.2 69.4 74 100 P3CU-1209ELF 12 20 55 9 55.5 75 100 P3CU-1212ELF 12 20 54 12 41.6 76 100 P3CU-1215ELF 12 20 54 15 33.3 76 100 P3CU-1218ELF 12 20 54 18 27.8 76 100 P3CU-1224ELF 12 20 53 24 20.8 78 100 P3CU-243R3ELF 24 10 29 3.3 151.5 70 100 P3CU-2405ELF 24 10 28 5 100 73 100 P3CU-247R2ELF 24 10 28 7.2 69.4 74 100 P3CU-2409ELF 24 10 28 9 55.5 75 100 P3CU-2412ELF 24 10 27 12 41.6 76 100 P3CU-2415ELF 24 10 26 15 33.3 78 100 P3CU-2418ELF 24 10 26 18 27.8 78 100 P3CU-2424ELF 24 10 26 24 20.8 78 100 P3CU-483R3ELF 48 6 14 3.3 151.5 70 100 P3CU-4805ELF 48 6 14 5 100 72 100 P3CU-487R2ELF 48 6 14 7.2 69.4 72 100 P3CU-4809ELF 48 6 14 9 55.5 74 100 P3CU-4812ELF 48 6 14 12 41.6 74 100 P3CU-4815ELF 48 6 13 15 33.3 75 100 P3CU-4818ELF 48 6 13 18 27.8 75 100 P3CU-4824ELF 48 6 13 24 20.8 77 100 If you need other specifications, please enquire.
PM1-Series – P3CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P3CU-3R305ZLF 3.3 25 236 ± 5 ± 50 64 ± 100 P3CU-053R3ZLF 5 30 166 ± 3.3 ± 75.7 60 ± 100 P3CU-0505ZLF 5 30 135 ± 5 ± 50 74 ± 100 P3CU-057R2ZLF 5 30 129 ± 7.2 ± 34.7 77 ± 100 P3CU-0509ZLF 5 30 128 ± 9 ± 27.7 78 ± 100 P3CU-0512ZLF 5 30 128 ± 12 ± 20.8 78 ± 100 P3CU-0515ZLF 5 30 128 ± 15 ± 16.7 78 ± 100 P3CU-0518ZLF 5 30 126 ± 18 ± 13.9 79 ± 100 P3CU-0524ZLF 5 30 126 ± 24 ± 10.4 79 ± 100 P3CU-123R3ZLF 12 20 69 ± 3.3 ± 75.7 60 ± 100 P3CU-1205ZLF 12 20 56 ± 5 ± 50 74 ± 100 P3CU-127R2ZLF 12 20 54 ± 7.2 ± 34.7 77 ± 100 P3CU-1209ZLF 12 20 53 ± 9 ± 27.7 78 ± 100 P3CU-1212ZLF 12 20 53 ± 12 ± 20.8 78 ± 100 P3CU-1215ZLF 12 20 53 ± 15 ± 16.7 78 ± 100 P3CU-1218ZLF 12 20 52 ± 18 ± 13.9 80 ± 100 P3CU-1224ZLF 12 20 52 ± 24 ± 10.4 80 ± 100 P3CU-243R3ZLF 24 10 35 ± 3.3 ± 75.7 60 ± 100 P3CU-2405ZLF 24 10 28 ± 5 ± 50 74 ± 100 P3CU-247R2ZLF 24 10 27 ± 7.2 ± 34.7 76 ± 100 P3CU-2409ZLF 24 10 27 ± 9 ± 27.7 76 ± 100 P3CU-2412ZLF 24 10 26 ± 12 ± 20.8 78 ± 100 P3CU-2415ZLF 24 10 26 ± 15 ± 16.7 78 ± 100 P3CU-2418ZLF 24 10 26 ± 18 ± 13.9 78 ± 100 P3CU-2424ZLF 24 10 26 ± 24 ± 10.4 80 ± 100 P3CU-483R3ZLF 48 6 17 ± 3.3 ± 75.7 60 ± 100 P3CU-4805ZLF 48 6 14 ± 5 ± 50 74 ± 100 P3CU-487R2ZLF 48 6 13 ± 7.2 ± 34.7 76 ± 100 P3CU-4809ZLF 48 6 13 ± 9 ± 27.7 76 ± 100 P3CU-4812ZLF 48 6 13 ± 12 ± 20.8 76 ± 100 P3CU-4815ZLF 48 6 13 ± 15 ± 16.7 77 ± 100 P3CU-4818ZLF 48 6 13 ± 18 ± 13.9 77 ± 100 P3CU-4824ZLF 48 6 13 ± 24 ± 10.4 79 ± 100 If you need other specifications, please enquire.
PM1-Series – P3CU-xxxxE/Z LF – Single and Dual Outp ut – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Modelcode Datecode 1 2 4 5 6 7 6.00* (0.24)19.50 (0.76) 15.24 (0.60) 2.54 (0.10) 0.50 (0.02) 0.50 (0.02) 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. * The thickness of 48Vin voltage is 7.20(0.28) PE AK SIP 7 – PLASTIC CASE # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin 4 - Vout - Vout
5 Omitted Common
7 Omitted Omitted
App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.