P3AU_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PMA-Series – P3AU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P3AU-xxxxELF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitor Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (20% - 100%) ± 10% (3.3Vout Models: ± 20%) Ripple and Noise (20Mhz bandwidth) 100 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency 80 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 1.5g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM A series P3AU -xxxxELF is a family of cost effective 0.5 W single output DC/DC converters. These converters are in an ultra miniature SIP4 case. Devices are encapsulated. High performance fe atures: 1000VDC input/output isolation, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% tolerance and low output ripple and noise. PMA-SERIES /checkbld 0.5 Watt /checkbld Unregulated /checkbld Single Output /checkbld SIP4 Case /checkbld 1 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.11-2008

PMA-Series – P3AU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P3AU-053R3ELF 5 30 134 3.3 151.5 75 100 P3AU-0505ELF 5 30 129 5 100 78 100 P3AU-057R2ELF 5 30 136 7.2 69.44 74 100 P3AU-0509ELF 5 30 134 9 55.55 75 100 P3AU-0512ELF 5 30 132 12 41.67 76 100 P3AU-0515ELF 5 30 132 15 33.33 76 100 P3AU-0518ELF 5 30 134 18 27.77 75 100 P3AU-0524ELF 5 30 139 24 20.83 72 100 P3AU-123R3ELF 12 20 60 3.3 151.5 70 100 P3AU-1205ELF 12 20 56 5 100 74 100 P3AU-127R2ELF 12 20 56 7.2 69.44 74 100 P3AU-1209ELF 12 20 56 9 55.55 75 100 P3AU-1212ELF 12 20 60 12 41.67 70 100 P3AU-1215ELF 12 20 60 15 33.33 70 100 P3AU-1218ELF 12 20 60 18 27.77 70 100 P3AU-1224ELF 12 20 60 24 20.83 70 100 P3AU-243R3ELF 24 10 31 3.3 151.5 67 100 P3AU-2405ELF 24 10 29 5 100 72 100 P3AU-247R2ELF 24 10 31 7.2 69.44 67 100 P3AU-2409ELF 24 10 31 9 55.55 67 100 P3AU-2412ELF 24 10 31 12 41.67 67 100 P3AU-2415ELF 24 10 29 15 33.33 72 100 P3AU-2418ELF 24 10 30 18 27.77 70 100 P3AU-2424ELF 24 10 30 24 20.83 70 100 P3AU-483R3ELF 48 6 17 3.3 151.5 62 100 P3AU-4805ELF 48 6 16 5 100 65 100 P3AU-487R2ELF 48 6 17 7.2 69.44 62 100 P3AU-4809ELF 48 6 17 9 55.55 62 100 P3AU-4812ELF 48 6 17 12 41.67 62 100 P3AU-4815ELF 48 6 17 15 33.33 62 100 P3AU-4818ELF 48 6 17 18 27.77 62 100 P3AU-4824ELF 48 6 17 24 20.83 62 100 If you need other specifications, please enquire.

PMA-Series – P3AU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Modelcode Datecode 1 2 3 4 11.68 (0.46) 9.65 (0.38) 3.05 (0.12) 2.54 (0.10) Bottom View 1 2 3 4 1.25 (0.05) 0.50 (0.02) 6.00* (0.24)* 0.50 (0.02) 0.50 (0.02) 0.50 (0.02) 0.25 (0.01) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. * The thickness of 48Vin voltage is 7.50 (0.29) PE AK SIP4 – PLASTIC CASE # SINGLE 1 - Vin 2 +Vin 3 - Vout 4 +Vout PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - For reduce converter’s ripple & noise, it is recommended to add a 4.7 µF~100 µF capacitor in output end. For EMI performance improvement, it is recommended to add a 12 µH inductor and a 10 µF~220 µF capacitor in input end. EMC SPECIFICATIONS Radiated Emissions EN 55022 FCC 47CFR Part 15/B CLASS B CLASS B ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A