P34TG_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PMD-Series – P34TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P34TG-xxxxE/Z2:1MLF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation (Io = 10 - 100%) ± 0.5% (3.3 Vout Models: ± 0.7%) Cross Regulation³ (Dual Output) ± 5% Over Current Protection 150% of FL, typ. Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacity 1000 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency (typical) 330 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 0.91 Mhrs Physical Specifications Case Material Nickel Coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 17.0g, typ. Environment Specifications Operating Temperature -40 to +60° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM D 8W series P34TG -xxxxE/Z2:1MLF is a family of cost effective 8W single & dual output DC-DC converters. These conver ters are encapsulated in miniature DIP24 metal case. High performance fea tures: 1500VDC input/output isolation, continuous short circuit pr otection with automatic restart and tight line / load regulation, high effi ciency operation, output voltage accuracy of ±1% maximum and a wide input of 2:1 PMD-SERIES /checkbld 8 Watt /checkbld Regulated /checkbld Single and Dual Output /checkbld 1.5 kV DC I/O Isolation /checkbld DIP24 Metal Case /checkbld Continuous Short Circuit Prot. /checkbld Full SMD Technology Rev.11-2008

PMD-Series – P34TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d ² (u F ) SINGLE OUTPUT P34TG-123R3E2:1MLF 9-18 20 687 3.3 0 2000 80 3300 P34TG-1205E2:1MLF 9-18 20 762 5 0 1500 82 2200 P34TG-1212E2:1MLF 9-18 20 784 12 0 665 85 470 P34TG-1215E2:1MLF 9-18 20 803 15 0 535 83 220 P34TG-243R3E2:1MLF 18-36 15 344 3.3 0 2000 80 3300 P34TG-2405E2:1MLF 18-36 15 381 5 0 1500 82 2200 P34TG-2412E2:1MLF 18-36 15 392 12 0 665 85 470 P34TG-2415E2:1MLF 18-36 15 397 15 0 535 84 220 P34TG-483R3E2:1MLF 36-72 15 172 3.3 0 2000 80 3300 P34TG-4805E2:1MLF 36-72 15 191 5 0 1500 82 2200 P34TG-4812E2:1MLF 36-72 15 198 12 0 665 84 470 P34TG-4815E2:1MLF 36-72 15 198 15 0 535 84 220 DUAL OUTPUT P34TG-1205Z2:1MLF 9-18 20 813 ± 5 0 ± 800 82 ± 1000 P34TG-1212Z2:1MLF 9-18 20 794 ± 12 0 ± 335 84 ± 220 P34TG-1215Z2:1MLF 9-18 20 794 ± 15 0 ± 265 84 ± 100 P34TG-2405Z2:1MLF 18-36 15 407 ± 5 0 ± 800 82 ± 1000 P34TG-2412Z2:1MLF 18-36 15 402 ± 12 0 ± 335 83 ± 220 P34TG-2415Z2:1MLF 18-36 15 392 ± 15 0 ± 265 85 ± 100 P34TG-4805Z2:1MLF 36-72 15 203 ± 5 0 ± 800 82 ± 1000 P34TG-4812Z2:1MLF 36-72 15 196 ± 12 0 ± 335 85 ± 220 P34TG-4815Z2:1MLF 36-72 15 196 ± 15 0 ± 265 85 ± 100 If you need other specifications, please enquire. Notes:

PMD-Series – P34TG-xxxxE/Z2:1MLF – Single and Dual Output – DIP24 - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating # SINGLE DUAL 2 - Vin - Vin 3 - Vin - Vin

9 Omitted Common

11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin others Omitted Omitted PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by nominal Vin and constant resistor load. ³ = One load is 25% - 100%, the other load is 100%, the output voltage variable rate is within ± 5% 4 = Input filter components (C1,C2,L) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; all leads should be minimized to decrease radiated noise. 5 = An external filter capacitor (e.g. Nippon - chemi - con KY series, 220uF/100V) is required if the module has to meet EN61000-4-4 and EN61000-4-5. EMC SPECIFICATIONS Radiated Emissions EN 55022 CLASS A Conducted Emissions 4 EN55022 CLASS A ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A EFT 5 IEC 61000-4-4 Perf. Criteria B Surge 5 IEC 61000-4-5 Perf. Criteria B CS IEC 61000-4-6 Perf. Criteria A PFMF IEC 61000-4-8 Perf. Criteria A