P34TG-11005E5:1M

P34TG-243R3E51M PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PMRW-Series – P34TG-xxxxE/Z5:1M – Single / Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 P34TG-xxxxE/Z5:1M All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 5:1 Wide Input (see table) Input Filter Pi Type Input Reflected Ripple Current¹ 20 mA pk-pk, typ. Start up time (Nominal Vin and constant resistive load) 30mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (hiccup) (Automatic Recovery) Line Regulation ± 0.5%, max. Load Regulation (0% - 100%) ± 0.5%, max. Cross Regulation (Dual Output) 2 ± 5% Ripple and Noise (20Mhz bandwidth) 3 75 mV pk-pk Temperature Coefficient ± 0.02% / °C Transient Recovery Time4 250us, typ. Transient Response Deviation4 ± 3%, max. ± 5%, max (for 3.3V output) General Specifications I/O Isolation Voltage (60 sec.) 3000 VDC I/O Isolation Capacity 1000 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency 220-330 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 800 Khrs Designed to meet: Safety Standart Thermal Shock Shock/Vibration IEC/EN 60950-1; EN50155 IEC60068 EN 61373 Physical Specifications Case Material Nickel-coated Copper Potting Material Epoxy (UL94V-0 rated) Weight ~ 18g, typ. Environment Specifications Operating Temperature -40 to +85°C (ambient) Maximum Case Temperature 105°C Storage Temperature -55 to +125°C Cooling Free Air Convection RoHS Conform Soldering 260°C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMRW Series include high performance 8W single & dual output DC- DC converters. These converters are consisted with nickle-coated copper DIP24 package with high performance features like synchronous rectification, high efficiency and tight line / load regulation. The Devices are encapsulated flame retardant resin. Available with railway Input voltages of 24, 36, 48, 72, 96 and 110Vdc (5:1 ultra wide), output voltages 3.3 , 5 , 12 , 15 , ±5, ±12 , ±15 (±1%) and high efficiency operation up to 86% PMRW-SERIES  8 Watt  5:1 Wide Input  Single and Dual Reg. Output  3 kV DC I/O Isolation  DIP24 case  On/Off Control  Designed for Railway App. Rev.07-2015

PMRW-Series – P34TG-xxxxE/Z5:1M – Single / Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single and Dual Output Order # Input Voltage (VDC)Input Current No Load (mA)Input Current Full Load (mA)Output Voltage (VDC)Output Current Min. Load (mA)Output Current Full Load (mA)Efficiency (%)Capacitor Load (uF) SINGLE OUTPUT P34TG-243R3E5:1M 13-70 30 398 3.3 0 2400 83 1330 P34TG-2405E5:1M 13-70 20 387 5 0 1600 86 1330 P34TG-2412E5:1M 13-70 10 392 12 0 665 85 330 P34TG-2415E5:1M 13-70 10 389 15 0 535 86 220 P34TG-1103R3E5:1M 42-176 10 89 3.3 0 2400 81 1330 P34TG-11005E5:1M 42-176 10 87 5 0 1600 84 1330 P34TG-11012E5:1M 42-176 5 87 12 0 665 84 330 P34TG-11015E5:1M 42-176 5 88 15 0 535 83 220 DUAL OUTPUT P34TG-2405Z5:1M 13-70 10 402 ± 5 0 ± 800 83 ± 900 P34TG-2412Z5:1M 13-70 10 395 ± 12 0 ± 335 85 ± 220 P34TG-2415Z5:1M 13-70 10 386 ± 15 0 ± 265 86 ± 100 P34TG-11005Z5:1M 42-176 10 91 ± 5 0 ± 800 80 ± 900 P34TG-11012Z5:1M 42-176 5 90 ± 12 0 ± 335 82 ± 220 P34TG-11015Z5:1M 42-176 5 88 ± 15 0 ± 265 83 ± 100 If you need other specifications, please enquire.

PMRW-Series – P34TG-xxxxE/Z5:1M – Single / Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating Bottom View 1 2 3 9 11 23 22 16 14 25.40 (1.00) 15.24 (0.60) 2.54 (0.10) PEAK Modelcode Datecode 20.30 (0.80) 31.80 (1.25) 10.20 (0.40) 3.00 (0.12) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Standard Drawing For exact pinning please see connection table! Specification may change without notice. DIP24 – METAL CASE 5.08 (0.20) 70 85 100% 75% 50% 25% -20 0 20 40 60 80 100 OUTPUT POWER AMBIENT TEMPERATURE (°C) TEMPERATURE DERATING GRAPH -40 -20% # SINGLE DUAL

1 CTRL CTRL

9 Omitted Common

11 N.C. - Vout 14 +Vout +Vout 16 - Vout Common 22 +Vin +Vin 23 +Vin +Vin PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH and source capacitor Cin (33uF, ESR<1Ohm at 100KHz) 2 = One load is 25% to 100%, the other load is 100% load, the output voltage variable is within ±5% 3 = Measured with a 0.1uF ceramic capacitor an 10uF electrolytic capacitor 4 = Tested by normal Vin and 75%-50%-25% load step change at 1A/us 5 = Tested by minimal Vin and constant resistive load Operation at no-load conditions will not damage these devices, however they may not meet all specifications.

PMRW-Series – P34TG-xxxxE/Z5:1M – Single / Dual Output – DIP24 - Metal Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4 App Notes EMC Specifications Radiated Emissions EN50121-3-2 40dBuV from 30-230MHz 47dBuV from 230-1000MHz Conducted Emissions EN50121-3-2 Class A 99dBuV from 0.15-0.5MHz 93dBuV from 0.5-30MHz ESD EN50121-3-2 Air ± 8KV Contact ± 6KV Perf. Criteria A RS EN50121-3-2 20V/m Perf. Criteria A EFT EN50121-3-2 2.0 KV Perf. Criteria A Surge EN50121-3-2 2.0 KV Perf. Criteria A CS EN50121-3-2 10V Perf. Criteria A PFMF EN61000-4-8 10A/m Perf. Criteria A The Remote on/off control: Positive logic: Turns on the module during high logic and off during low logic. Ctrl module on/off can be controlles by an external switch between ctrl terminal and –Vin. The switch can be open collector or open drain. If the ctrl feature is not used, please leave the ctrl pin floating. EMI Filter (For 110Vin Models only) Input Filter components (C1, C2, C3 = 1uF, 250V) are used to meet conducted emissions 79BuV from 0.15-0.5MHz and 73BuV from 0.5- 30MHz. The components should be mounted as close as possible. Over Voltage Protection The module has an internal output over voltage protection circuit, which monitors the voltage on the output terminals. If this voltage exceeds the over voltage set point, the module will activate the control loop of internal circuit to clamp the output voltage. Over Current Protection The module includes an internal over current protection circuit, which will endure current limiting for an unlimited duration during output over load condition. If the output current exceeds the OCP set point, the module will shut down automatically (hiccup). The module will try to restart after shut down. If the over load condition still exists, the module will shut down again.