P30WG-1205E2:1LF

P30WG-123R3E21LF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PMT-Series – P30WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P30WG-xxxxE/Z2:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (see table) Input Filter PI Type Input Reflected Ripple Current¹ 20 mA pk-pk Start up Time (Nom. Vin and constant resistive load) 30mS, typ. Output Specifications Voltage Accuracy ± 1% Voltage Adjustability (only Single Output) ± 10%, max. Short Circuit Protection Indefinite (hiccup, automatic recovery) Over Load Protection 150% of FL, typ. Line Regulation ± 0.5%, max. Load Regulation (0% - 100%) ± 0.5% (single) ±1% (dual balanced load), max. Cross Regulation³ ± 5% (dual) Ripple&Noise (20Mhz bandwidth / 1.0uF – pk-pk) 100 mV, max. Temperature Coefficient ± 0.02% / ° C Transient Recovery Time 4 250us, typ. Transient Response Deviation 4 ± 3%, max. General Specifications I/O Isolation Voltage (3 sec.) 1600 VDC I/O Isolation Capacitance 1500 pF, typ. I/O Isolation Resistance 1000 M Ohm, min. Switching Frequency 330 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) >435 khrs Physical Specifications Case Material Nickel Coated Copper Potting / Base Material Epoxy / Plastic (UL94V-0 rated) Weight ~ 31g, typ. Environment Specifications Operating Temperature -40 to +50° C (for 100% - ambient) Maximum Case Temperature 105° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMT series P30WG -xxxxE/Z 2 :1LF is a family of cost effective 30 W, single and dual output DC-DC converters with a wide input range of 2:1. These converters are encapsulated in nickel coated brass 2”x1” case with high performance features: 1600VDC input/output iso lation voltage, continuous short circuit protection with automatic restart and tight line / load regulation, over current protection, over voltage p rotection, over temperature protection, high efficiency operation a nd soft start. PMT-SERIES /checkbld 30 Watt /checkbld 2:1 Wide Input /checkbld 2” x 1” Metal Case /checkbld 1.6 kV DC I/O Isolation /checkbld Regulated Output /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. Rev.11-2009

PMT-Series – P30WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single and Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P30WG-123R3E2:1LF 9-18 80 2426 3.3 0 8000 89 20000 P30WG-1205E2:1LF 9-18 180 2874 5 0 6000 91 14000 P30WG-125R1E2:1LF 9-18 160 2874 5.1 0 6000 92 14000 P30WG-1212E2:1LF 9-18 30 2809 12 0 2500 91 2000 P30WG-1215E2:1LF 9-18 30 2809 15 0 2000 92 2000 P30WG-243R3E2:1LF 18-36 70 1185 3.3 0 8000 91 20000 P30WG-2405E2:1LF 18-36 100 1420 5 0 6000 92 14000 P30WG-245R1E2:1LF 18-36 100 1448 5.1 0 6000 92 14000 P30WG-2412E2:1LF 18-36 20 1436 12 0 2500 92 2000 P30WG-2415E2:1LF 18-36 40 1420 15 0 2000 92 2000 P30WG-483R3E2:1LF 36-72 50 593 3.3 0 8000 90 20000 P30WG-4805E2:1LF 36-72 70 702 5 0 6000 91 14000 P30WG-485R1E2:1LF 36-72 70 724 5.1 0 6000 91 14000 P30WG-4812E2:1LF 36-72 30 718 12 0 2500 91 2000 P30WG-4815E2:1LF 36-72 30 710 15 0 2000 91 2000 DUAL OUTPUT P30WG-1205Z2:1LF 9-18 180 2874 ± 5 0 ± 3000 89 ± 3000 P30WG-1212Z2:1LF 9-18 50 2874 ± 12 0 ± 1250 90 ± 1300 P30WG-1215Z2:1LF 9-18 50 2874 ± 15 0 ± 1000 91 ± 1300 P30WG-2405Z2:1LF 18-36 100 1437 ± 5 0 ± 3000 90 ± 3000 P30WG-2412Z2:1LF 18-36 40 1453 ± 12 0 ± 1250 91 ± 1300 P30WG-2415Z2:1LF 18-36 50 1437 ± 15 0 ± 1000 91 ± 1300 P30WG-4805Z2:1LF 36-72 70 710 ± 5 0 ± 3000 90 ± 3000 P30WG-4812Z2:1LF 36-72 50 718 ± 12 0 ± 1250 90 ± 1300 P30WG-4815Z2:1LF 36-72 40 718 ± 15 0 ± 1000 90 ± 1300 If you need other specifications, please enquire. Notes:

PMT-Series – P30WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 10.16 (0.40) 5.08 (0.20) min. Bottom View 4 6 5 10.16 (0.40) 1 2 5.08 (0.20) 5.08 (0.20) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) DIA. 1.00 (0.04) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 2" x 1" – METAL CASE AND OUTPUT MODELS 5.08 (0.20) # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin

3 CTRL CTRL

6 TRIM - Vout

Notes:

PMT-Series – P30WG-xxxxE/Z 2:1LF – Single and Dual Output – 2”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 App Notes 1 = Measured Input reflected ripple current with a simulated source inductance of 12uH. 2 = Tested by minimal Vin and constant resistive load. 3 = Dual: One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 4 = Tested by nominal Vin and 25% load step change (75% - 50% - 25% of Io) 5 = The PMT series can meet EN55022 Class A With an external filter in parallel with the input pins. 6 = An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5 7 = The remote on/off control pin is referenced to –Vin (Pin2). EMC SPECIFICATIONS Radiated Emissions EN 55022 CLASS A Conducted Emissions 5 EN 55022 CLASS A ESD EN 61000-4-2 Perf. Criteria A RS EN 61000-4-3 Perf. Criteria A EFT 6 EN 61000-4-4 Perf. Criteria A Surge 6 EN 61000-4-5 Perf. Criteria A CS EN 61000-4-6 Perf. Criteria A PFMF EN 61000-4-8 Perf. Criteria A Over Voltage Protection (Zender diode clamp) 3.3 Vout: 3.9 V 5 Vout 6.2 V 5.1 Vout 6.2 V

12 Vout 15 V

15 Vout 18 V

± 5 Vout ± 6.2 V ± 12 Vout ± 15 V ± 15 Vout ± 18 V Under Input Voltage Lockout (typ.) 12 Vin Models Module ON/OFF 8.6V / 7.9V 24 Vin Models Module ON/OFF 17.8V / 16V 48 Vin Models Module ON/OFF 33.5V / 30.5V Remote ON/OFF Control 7 ON: 3 -12 VDC or open circuit OFF: 0 – 1.2 VDC or short circuit PIN2 and PIN3 OFF idle current: 5mA, typ. Rtrim-up Rtrim-down External Output Trimming Output can be externally trimmed. (Single output models only!) C1: 100uF, 100V L: 12uH C3: 1206, 470PF, 2kV Single&Dual Models EMI Filter: Input filter components (C1, C3, L) are used to help meet conducted emissions requirement. These components should be mounted as close as possible to the module; all leads should be minimized to decrease radiated noise. CTRL Module ON / OFF Positive logic turns on the module during high logic and off during low logic. Ctrl module on/off can be controlled by an external switch between the ctrl terminal and -Vin terminal. The switch can be an open collector or open drain For positive logic if the ctrl feature is not used, please leave the ctrl pin floating.