P30PG-1205E21LF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PM7L-Series – P30PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P30PG-xxxxE/Z2:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (See Table) Input Filter Capacitors Input Reflected Ripple Current¹ 35 mA pk-pk Start up Time (Nom. Vin and constant resistive load) 20mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (Automatic Recovery) Over Current Protection 140% of max. Iout Line Regulation ± 0.5% Load Regulation Single: Dual: ± 0.5% (0% - 100%) Ripple and Noise (20Mhz bandwidth) 100 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacitance 1000 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 125 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Safety Standard (designed to meet) IEC 60950-1 Physical Specifications Case Material Nickel Coated Brass Potting Material Epoxy (UL94V-0 rated) Weight ~ 60g, typ. Environment Specifications Operating Temperature -40 to +55° C (for 100% load) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM7 L series is a family of cost effective 15 -30 W single & dual output DC-DC converters. These converters are made with ni ckle-coated brass case in a 2”x2” with high performance features such as 1500 VDC input/output isolation voltage, continuous short ci rcuit protection with automatic restart and tight line / load regulation. Devices are encapsulated by using flame retardant resin. High performance fe atures are high efficiency operation up to 87% and output voltage a ccuracy of ±1% maximum. PM7L-SERIES /checkbld 30 Watt /checkbld 2:1 Wide Input /checkbld 2” x 2” Case /checkbld 1.5 kV DC I/O Isolation /checkbld Regulated Output /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. Rev.02-2011

PM7L-Series – P30PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P30PG-1205E2:1LF 9-18 30 3048 5 0 6000 82 3300 P30PG-127R2E2:1LF 9-18 30 3012 7.2 0 4166 83 2200 P30PG-1209E2:1LF 9-18 30 2976 9 0 3333 84 1000 P30PG-1212E2:1LF 9-18 30 2976 12 0 2500 84 1000 P30PG-1215E2:1LF 9-18 30 2941 15 0 2000 85 1000 P30PG-1218E2:1LF 9-18 30 2941 18 0 1666 85 680 P30PG-1224E2:1LF 9-18 30 2941 24 0 1250 85 470 P30PG-243R3E2:1LF 18-36 25 1031 3.3 0 6000 80 3300 P30PG-2405E2:1LF 18-36 25 1488 5 0 6000 84 3300 P30PG-247R2E2:1LF 18-36 25 1488 7.2 0 4166 84 2200 P30PG-2409E2:1LF 18-36 25 1436 9 0 3333 87 1000 P30PG-2412E2:1LF 18-36 25 1436 12 0 2500 87 1000 P30PG-2415E2:1LF 18-36 25 1436 15 0 2000 87 1000 P30PG-2418E2:1LF 18-36 25 1436 18 0 1666 87 680 P30PG-2424E2:1LF 18-36 25 1436 24 0 1250 87 470 P30PG-483R3E2:1LF 36-72 20 522 3.3 0 6000 79 3300 P30PG-4805E2:1LF 36-72 20 753 5 0 6000 83 3300 P30PG-487R2E2:1LF 36-72 20 744 7.2 0 4166 84 2200 P30PG-4809E2:1LF 36-72 20 744 9 0 3333 84 1000 P30PG-4812E2:1LF 36-72 20 726 12 0 2500 86 1000 P30PG-4815E2:1LF 36-72 20 710 15 0 2000 88 1000 P30PG-4818E2:1LF 36-72 20 710 18 0 1666 88 680 P30PG-4824E2:1LF 36-72 20 710 24 0 1250 88 470 If you need other specifications, please enquire. Notes:

PM7L-Series – P30PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P30PG-123R3Z2:1LF 9-18 25 2115 ± 3.3 0 ± 3000 78 ± 2200 P30PG-1205Z2:1LF 9-18 25 3048 ± 5 0 ± 3000 82 ± 2200 P30PG-127R2Z2:1LF 9-18 25 3012 ± 7.2 0 ± 2083 83 ± 1000 P30PG-1209Z2:1LF 9-18 25 2976 ± 9 0 ± 1666 84 ± 1000 P30PG-1212Z2:1LF 9-18 25 2976 ± 12 0 ± 1250 84 ± 1000 P30PG-1215Z2:1LF 9-18 35 2941 ± 15 0 ± 1000 85 ± 470 P30PG-1218Z2:1LF 9-18 35 2941 ± 18 0 ± 833 85 ± 330 P30PG-1224Z2:1LF 9-18 35 2941 ± 24 0 ± 625 85 ± 220 P30PG-243R3Z2:1LF 18-36 25 1057 ± 3.3 0 ± 3000 78 ± 2200 P30PG-2405Z2:1LF 18-36 25 1488 ± 5 0 ± 3000 84 ± 2200 P30PG-247R2Z2:1LF 18-36 25 1488 ± 7.2 0 ± 2083 84 ± 1000 P30PG-2409Z2:1LF 18-36 25 1470 ± 9 0 ± 1666 85 ± 1000 P30PG-2412Z2:1LF 18-36 25 1470 ± 12 0 ± 1250 85 ± 1000 P30PG-2415Z2:1LF 18-36 25 1436 ± 15 0 ± 1000 87 ± 470 P30PG-2418Z2:1LF 18-36 25 1436 ± 18 0 ± 833 87 ± 330 P30PG-2424Z2:1LF 18-36 30 1436 ± 24 0 ± 625 87 ± 220 P30PG-483R3Z2:1LF 36-72 20 515 ± 3.3 0 ± 3000 80 ± 2200 P30PG-4805Z2:1LF 36-72 20 735 ± 5 0 ± 3000 85 ± 2200 P30PG-487R2Z2:1LF 36-72 20 735 ± 7.2 0 ± 2083 85 ± 1000 P30PG-4809Z2:1LF 36-72 20 735 ± 9 0 ± 1666 85 ± 1000 P30PG-4812Z2:1LF 36-72 20 718 ± 12 0 ± 1250 87 ± 1000 P30PG-4815Z2:1LF 36-72 20 710 ± 15 0 ± 1000 88 ± 470 P30PG-4818Z2:1LF 36-72 20 710 ± 18 0 ± 833 88 ± 330 P30PG-4824Z2:1LF 36-72 20 710 ± 24 0 ± 625 88 ± 220 If you need other specifications, please enquire. Notes:

PM7L-Series – P30PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Pin pitch tolerance: +/-0.35 (+/-0.014) Case tolerance +/-0.5 (+/-0.02) # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin 3 +Vout +Vout

4 Omitted Common

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. PEAK PxxPG-xxxxE/Z2:1LF