P26NG-053R3E21LF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PMB-Series – P(C)26NG-xxxxE/Z2:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 P(C)26NG-xxxxE/Z2:1LF All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (see table) Input Filter Capacitors Input Reflected Ripple Current¹ 30 mA pk-pk Start up time (Nominal Vin and constant resistive load) 30mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Continuous (Automatic Recovery) Line Regulation ± 0.2%, max. Load Regulation (0% - 100%) ± 1%, max. Cross Regulation (Dual Output) 2 ± 5% Ripple and Noise (20Mhz bandwidth) 3 75 mV pk-pk Temperature Coefficient ± 0.02% / °C Transient Recovery Time4 500us, typ. Transient Response Deviation4 ± 3%, max. ± 5%, max (at 3.3V & 5V output) General Specifications I/O Isolation Voltage (60 sec.) 1500 VDC I/O Isolation Capacity 50 pF, max. I/O Isolation Resistance 1000 MOhm Switching Frequency 100 kHz, min. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 770 Khrs Physical Specifications Case Material Non Conductive Black Plastic Potting Material Epoxy (UL94V-0 rated) Weight ~ 4.8g, typ. Environment Specifications Operating Temperature -40 to +65°C (ambient) Maximum Case Temperature 105°C Storage Temperature -55 to +125°C Cooling Free Air Convection RoHS Conform Soldering 260°C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMB series is a family of cost effective 6W single and dual output DC/DC converters with an optional control Pin. These converters are in an ultra-miniature SIP8 plastic case. Devices are encapsulated using flame retardant resin. High performance features include continuous / long time short circuit protection with automatic restart and tight line / load regulation. High performance features include high efficiency operation and output voltage accuracy of ±1% maximum. PMB-Series is a good substitution of traditional DC/DC converters 6W in DIP24 package. PMB-SERIES  6 Watt  2:1 Wide Input  Single and Dual Reg. Output  1.5 kV DC I/O Isolation  SIP8 case  On/Off Control (optional)  Contin. Short Circuit Protection Rev.07-2015

PMB-Series – P(C)26NG-xxxxE/Z2:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single and Dual Output Order # Input Voltage (VDC)Input Current No Load (mA)Input Current Full Load (mA)Output Voltage (VDC)Output Current Min. Load (mA)Output Current Full Load (mA)Efficiency (%)Capacitor Load (uF) SINGLE OUTPUT P26NG-053R3E2:1LF 4.5-9 105 1144 3.3 0 1300 75 6600 P26NG-0505E2:1LF 4.5-9 105 1519 5 0 1200 78 3300 P26NG-0509E2:1LF 4.5-9 105 1445 9 0 666 83 2000 P26NG-0512E2:1LF 4.5-9 105 1428 12 0 500 84 1600 P26NG-0515E2:1LF 4.5-9 105 1428 15 0 400 84 1400 P26NG-0524E2:1LF 4.5-9 105 1428 24 0 250 84 680 P26NG-123R3E2:1LF 9-18 55 470 3.3 0 1300 76 6600 P26NG-1205E2:1LF 9-18 55 602 5 0 1200 83 3300 P26NG-1209E2:1LF 9-18 55 595 9 0 666 84 2000 P26NG-1212E2:1LF 9-18 55 588 12 0 500 85 1600 P26NG-1215E2:1LF 9-18 55 588 15 0 400 85 1400 P26NG-1224E2:1LF 9-18 55 581 24 0 250 86 680 P26NG-243R3E2:1LF 18-36 30 229 3.3 0 1300 78 6600 P26NG-2405E2:1LF 18-36 30 301 5 0 1200 83 3300 P26NG-2409E2:1LF 18-36 30 294 9 0 666 85 2000 P26NG-2412E2:1LF 18-36 30 294 12 0 500 85 1600 P26NG-2415E2:1LF 18-36 30 287 15 0 400 87 1400 P26NG-2424E2:1LF 18-36 30 287 24 0 250 87 680 P26NG-483R3E2:1LF 36-72 15 117 3.3 0 1300 76 6600 P26NG-4805E2:1LF 36-72 15 156 5 0 1200 80 3300 P26NG-4809E2:1LF 36-72 15 147 9 0 666 85 2000 P26NG-4812E2:1LF 36-72 15 149 12 0 500 84 1600 P26NG-4815E2:1LF 36-72 15 145 15 0 400 86 1400 P26NG-4824E2:1LF 36-72 15 148 24 0 250 84 680 DUAL OUTPUT P26NG-0505Z2:1LF 4.5-9 105 1481 ± 5 0 ± 600 81 ± 2000 P26NG-0512Z2:1LF 4.5-9 105 1428 ± 12 0 ± 250 84 ± 900 P26NG-0515Z2:1LF 4.5-9 105 1428 ± 15 0 ± 200 84 ± 660 P26NG-1205Z2:1LF 9-18 55 609 ± 5 0 ± 600 82 ± 2000 P26NG-1212Z2:1LF 9-18 55 595 ± 12 0 ± 250 84 ± 900 P26NG-1215Z2:1LF 9-18 55 581 ± 15 0 ± 200 86 ± 660 P26NG-2405Z2:1LF 18-36 20 304 ± 5 0 ± 600 82 ± 2000 P26NG-2412Z2:1LF 18-36 20 297 ± 12 0 ± 250 84 ± 900 P26NG-2415Z2:1LF 18-36 20 297 ± 15 0 ± 200 84 ± 660 P26NG-4805Z2:1LF 36-72 15 152 ± 5 0 ± 600 82 ± 2000 P26NG-4812Z2:1LF 36-72 15 147 ± 12 0 ± 250 85 ± 900 P26NG-4815Z2:1LF 36-72 15 147 ± 15 0 ± 200 85 ± 660 If you need other specifications, please enquire. For optional Control Pin, please add “C” between P and 26 For example: PC26NG-2405Z2:1LF

PMB-Series – P(C)26NG-xxxxE/Z2:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 0.50 (0.02) 3,50 (0.14) 0.50 (0.02) 0.25 (0.01) All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. Modelcode Datecode 1 2 3 6 7 8 21.85 (0.86) 11.10 (0.44) 17.78 (0.70) 2.54 (0.1) 0.50 (0.02) 9.20 (0.36) 3.05 (0.12) SIP8 – PLASTIC CASE PEAK 65 90 100% 75% 50% 25% -20 0 20 40 60 80 100 OUTPUT POWER AMBIENT TEMPERATURE (°C) TEMPERATURE DERATING GRAPH -40 -20% # SINGLE DUAL SINGLE "C" DUAL "C" 1 - Vin - Vin - Vin - Vin 2 +Vin +Vin +Vin +Vin 3 Omitted N.C. Ctrl. Ctrl. 6 +Vout +Vout +Vout +Vout 7 - Vout Common - Vout Common 8 N.C. - Vout N.C. - Vout PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH and source capacitor Cin (47uF, ESR<1Ohm at 100KHz) 2 = One load is 25% to 100%, the other load is 100% load, the output voltage variable is within ±5% 3 = Measured with a 0.1uF ceramic capacitor 4 = Tested by normal Vin and 100%-25% load, 25% load step change 5 = Tested by minimal Vin and constant resistive load Operation at no-load conditions will not damage these devices, however they may not meet all specifications.

PMB-Series – P(C)26NG-xxxxE/Z2:1LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4 App Notes Test Configurations C1 C2 & C3 L C4 & C5 P26NG-05xxE/Z2:1LF Electrolytic capacitor 220uF/100V MLCC 22uF/25V 10uH MLCC 220pF/3KV P26NG-12xxE/Z2:1LF - MLCC 10uF/50V 10uH MLCC 220pF/3KV P26NG-24xxE/Z2:1LF - MLCC 10uF/50V 10uH MLCC 220pF/3KV P26NG-48xxE/Z2:1LF - MLCC 2.2uF/100V 10uH MLCC 220pF/3KV EMC Specifications Radiated Emissions EN55022 Class A Conducted Emissions EN55022 Class A Input filter components are required to help meeting conducted emission class A, which application refer to the EMI Filter of design & feature configuration. ESD IEC 61000-4-2 Perf. Criteria A RS IEC 61000-4-3 Perf. Criteria A EFT IEC 61000-4-4 Perf. Criteria A An external filter capacitor is required if the module has to meet IEC61000-4-4 and IEC61000-4-5. Surge IEC 61000-4-5 Perf. Criteria A CS IEC 61000-4-6 Perf. Criteria A PFMF IEC 61000-4-8 Perf. Criteria A The Remote on/off control: ON: open or high impedance OFF: 2 – 4 mA input current (via 1kOhm) Off stand by input current (Nominal Vin): 2.5mA